2000 TOYOTA CAMRY Service Repair Manual

Page 1705 of 4770

TOYOTA CAMRY 2000  Service Repair Manual AUTOMATIC TRANSAXLEOVERDRIVE UNIT ±
AX±72
12. INSTALL OVERDRIVE ONE±WAY CLUTCH INTO HUB
Be sure that the one±way clutch is installed in the correct
direction.
13. INSTALL RETAINING PLATE
(a) Place

Page 1706 of 4770

TOYOTA CAMRY 2000  Service Repair Manual AUTOMATIC TRANSAXLEOVERDRIVE UNIT ±
AX±73
OVERDRIVE CASE DISASSEMBLY
1. REMOVE C0 ACCUMULATOR PISTON FROM OVER-
DRIVE CASE
(a) Using snap ring pliers, remove the snap ring.
(b) Remove the retaining

Page 1707 of 4770

TOYOTA CAMRY 2000  Service Repair Manual AUTOMATIC TRANSAXLEOVERDRIVE UNIT ±
AX±74
OVERDRIVE CASE ASSEMBLY
1. INSTALL OIL SEAL RINGS ON OVERDRIVE CASE
Install the oil seal rings to the O/D case groove, then snug
them down by squeezing thei

Page 1708 of 4770

TOYOTA CAMRY 2000  Service Repair Manual AUTOMATIC TRANSAXLEOVERDRIVE UNIT ±
AX±75
(b) Install the discs and plates.
Install in order: P=Plate D=Disc
Flange ± D ± P ± P ± D ± P
HINT: There are 2 different thickness plates, as shown in

Page 1709 of 4770

TOYOTA CAMRY 2000  Service Repair Manual AUTOMATIC TRANSAXLEVALVE BODY ±
AX±76
VALVE BODY
COMPONENTS
VALVE BODY DISASSEMBLY
1. NOTE THE NUMBERS OF ADJUSTING RINGS
HINT: Count the number of adjusting rings before disas-
sembly of the valve

Page 1710 of 4770

TOYOTA CAMRY 2000  Service Repair Manual AUTOMATIC TRANSAXLEVALVE BODY ±
AX±77
3. REMOVE UPPER VALVE BODY COVER
Remove the 9 bolts and upper valve body cover.
4. REMOVE STRAINER GASKETS, PLATE AND SLEEVE
STOPPER FROM UPPER VALVE BODY
(a) R

Page 1711 of 4770

TOYOTA CAMRY 2000  Service Repair Manual AUTOMATIC TRANSAXLEVALVE BODY ±
AX±78
7. REMOVE BOLTS FROM LOWER VALVE BODY
Remove the 3 bolts from lower valve body.
8. LIFT OFF LOWER VALVE BODY AND PLATE AS
SINGLE UNIT
Hold the plate to the lowe

Page 1712 of 4770

TOYOTA CAMRY 2000  Service Repair Manual AUTOMATIC TRANSAXLEVALVE BODY ±
AX±79
2. PLACE LOWER VALVE BODY WITH PLATE AND GAS-
KETS ON UPPER VALVE BODY
HINT: Hold the lower valve body, gaskets and plate se-
curely so they do not separate.
Al