2003 NISSAN X-TRAIL Electronic Repair Manual

Page 473 of 3066

NISSAN X-TRAIL 2003  Electronic Repair Manual DISASSEMBLY
AT-467
[ALL]
D
E
F
G
H
I
J
K
L
MA
B
AT
5. Set manual shaft to position P.
6. Remove park/neutral position (PNP) switch.
7. Remove oil pan and oil pan gasket.
lDo not reuse oil pan bolts.
8

Page 474 of 3066

NISSAN X-TRAIL 2003  Electronic Repair Manual AT-468
[ALL]
DISASSEMBLY
c. Push terminal body into transmission case.
10. Remove manual valve from control valve assembly.
11. Remove return spring from servo release accumulator piston.
12. Remove s

Page 475 of 3066

NISSAN X-TRAIL 2003  Electronic Repair Manual DISASSEMBLY
AT-469
[ALL]
D
E
F
G
H
I
J
K
L
MA
B
AT
14. Remove N-D accumulator piston and return spring with com-
pressed air.
15. Remove O-rings from N-D accumulator piston.
16. Check accumulator pist

Page 476 of 3066

NISSAN X-TRAIL 2003  Electronic Repair Manual AT-470
[ALL]
DISASSEMBLY
c. Remove O-ring from differential oil port.
21. Remove final drive assembly from transmission case.
22. Remove differential side bearing outer race and side bearing
adjusting

Page 477 of 3066

NISSAN X-TRAIL 2003  Electronic Repair Manual DISASSEMBLY
AT-471
[ALL]
D
E
F
G
H
I
J
K
L
MA
B
AT
24. Remove differential side bearing outer race from converter
housing.
25. Remove oil seal with screwdriver from converter housing.
lBe careful not

Page 478 of 3066

NISSAN X-TRAIL 2003  Electronic Repair Manual AT-472
[ALL]
DISASSEMBLY
c. Remove thrust washer and bearing race from oil pump assem-
bly.
28. Remove brake band according to the following procedures.
a. Loosen lock nut, then back off anchor end pi

Page 479 of 3066

NISSAN X-TRAIL 2003  Electronic Repair Manual DISASSEMBLY
AT-473
[ALL]
D
E
F
G
H
I
J
K
L
MA
B
AT
c. Check brake band facing for damage, cracks, wear or burns.
29. Remove input shaft assembly (high clutch) and reverse clutch
according to the follo

Page 480 of 3066

NISSAN X-TRAIL 2003  Electronic Repair Manual AT-474
[ALL]
DISASSEMBLY
e. Remove front sun gear and needle bearing from high clutch hub
and check for damage or wear.
f. Remove bearing race from front sun gear and check for damage
or wear.
30. Rem