Page 3057 of 3066

HEADLAMP WASHER
WW-19
C
D
E
F
G
H
I
J
L
MA
B
WW
HEADLAMP WASHERPFP:28620
System DescriptionEKS0036H
The headlamp washer is controlled by the headlamp washer timer. Power is supplied at all times. With power
and ground supplied, the headlamp washer motor operates.
lthrough 30A fusible link (letter E, located in fuse and fusible link box)
lto headlamp washer motor terminal 1, and
lthrough10Afuse(No.31,locatedinfuseandfusiblelinkbox)
lto lighting switch terminal 11.
lthrough 10A fuse [No. 11, located in fuse block (J/B)]
lto headlamp washer timer terminal 4.
Ground is supplied to headlamp washer timer terminal 5 through body grounds E24 and E50. When headlamp
washer switch is pushed during lighting switch is in 1st or 2ND position, ground is supplied
lto headlamp washer timer terminal 6
lthrough headlamp washer switch and body grounds M27 and M70, and
lto headlamp washer motor terminal 2
lthrough headlamp washer timer terminal 3.
With ignition switch in the ON or START position, power is supplied
Page 3058 of 3066
WW-20
HEADLAMP WASHER
Wiring Diagram –HLC–
EKS0036I
TKWA0107E
Page 3059 of 3066
HEADLAMP WASHER
WW-21
C
D
E
F
G
H
I
J
L
MA
B
WW
Removal and Installation for Washer NozzleEKS0036J
REMOVAL
1. Remove front bumper, refer toEI-6, "FRONT BUMPER"
2. Remove hose clip and washer nozzle metal clip.
3. Remove washer nozzle from front bumper.
INSTALLATION
Installation is in the reverse order of removal.
Inspection for Washer NozzleEKS0036K
CHECK VALVE
lBlow air in the injection direction, and check that air flows only
one way. Make sure that the reverse direction is not possible.
Removal and Installation for Washer TankEKS0036L
Refer to,WW-12, "Removal and Installation for Washer Tank"
Removal and Installation for Washer PumpEKS0036M
1. Remove front bumper, refer toEI-6, "FRONT BUMPER"
2. Remove washer pump connector and hose.
3. Pull out washer pump in the direction of the arrow in the figure,
and remove the washer pump from the washer tank.
CAUTION:
When installing washer pump, there should be no packing twist,
etc.
PKIA0490E
PKIA0491E
PKIA0494E
Page 3060 of 3066
WW-22
HEADLAMP WASHER
Washer Tube Layout
EKS0036N
PKIA0539E
Page 3061 of 3066
HORN
WW-23
C
D
E
F
G
H
I
J
L
MA
B
WW
HORNPFP:25610
Wiring Diagram — HORN —EKS0033A
TKWA0108E
Page 3062 of 3066
WW-24
HORN
Removal and Installation
EKS0033B
REMOVAL
1. Remove the front grille.refer toEI-11, "FRONT GRILL"
2. Disconnect horn connector.
3. Remove horn.
INSTALLATION
Tighten horn bolt to specified torque.
SKIA0027E
Horn bolt : 16-18 N·m(1.6-1.8 kg-m, 12-13 ft-lb)
Page 3063 of 3066
CIGARETTE LIGHTER
WW-25
C
D
E
F
G
H
I
J
L
MA
B
WW
CIGARETTE LIGHTERPFP:35330
Wiring Diagram — CIGAR —EKS0033C
TKWA0109E
Page 3064 of 3066
WW-26
CIGARETTE LIGHTER
Removal and Installation
EKS0033D
REMOVAL
1. Remove ashtray from instrument lower center panel, refer toIP-
7, "AUDIO UNIT AND POCKET"
2. Remove the cigarette lighter assembly.
3. Disconnect cigarette lighter connector, and remove cigarette
lighter ring and socket.
INSTALLATION
Install in the reverse order of removal aligning notches of cigarette lighter ring and instrument lower center
panel.
PKIA0492E
PKIA0493E