Page 417 of 3039
2. Install new nuts to the stabilizer bar links.
Tighten to 48 Nm.
3. Install the rear subframe.
4. NOTE: Left-hand shown, right-hand similar.
Loosely install the rear subframe front bolt.
5. Loosely install the rear subframe rear bolt.
Page 418 of 3039
6. NOTE: Left-hand shown, right-hand similar.
Loosely install the rear subframe reinforcement plate bolts.
7. Tighten the subframe bolts.
Tighten to 80 Nm + 240°.
8. Remove the special tool.
9. Tighten the rear subframe reinforcement plate retaining bolts.
Tighten to 47 Nm.
Page 419 of 3039
10.
11.
12. NOTE: Left-hand shown, right-hand similar.
Install the shock absorber.
Tighten to 133 Nm.
NOTE: Install the components to their original fitted
positions.
Attach the driveshaft to the rear drive axle flange.
Attach the fuel filler hose to the fuel tank.
13.
Connect both park brake cables to the rear brake calipers. www.JagDocs.com
Page 420 of 3039
Page 421 of 3039
System - V6 3.0L Petrol, Removal and Installation).
19. Refill the fuel tank.
For additional information, refer to: Fuel Tank Draining (310-00 Fuel System - General Information, General Procedures).
20. Bleed the brake system.
For additional information, refer to: Brake System Bleeding (206-00 Brake System - General Information, General Procedures).
21. Install the rear wheels and tires.
For additional information, refer to: Wheel and Tire (204-04 Wheels and Tires, Removal and Installation).
22. Connect the battery ground cable.
For additional information, refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).
23. Using only four-wheel alignment equipment approved by Jaguar, check
and adjust the wheel alignment.
For additional information, refer to: Camber and Caster Adjustment (204-00 Suspension System - General Information, General Procedures).
Page 422 of 3039
204-269
Flange remover forcing screw
204-305
Remover, Wheel Bearing
204-725
Support Tool, Wheel Hub
204-726
Remover/Installer, Wheel Bearing
204-727A
Installer, Wheel Bearing
Page 423 of 3039
205-491
Hub puller
205-491-1
Adapter nuts Removal
1. WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
2. Refer to: Wheel and Tire (204-04 Wheels and Tires, Removal and Installation).
3.
Page 424 of 3039