Page 3017 of 3039
Page 3018 of 3039
14.
15.
CAUTION:
Make sure to support the steering gear.
NOTE:
LHD illustration shown, RHD is similar.
16.
Page 3019 of 3039
17.
18. 19.
NOTES:
LH illustration shown, RH is similar.
Repeat the step for the other side.
Page 3020 of 3039
20.
21. NOTE:
Note the fitted position of each bolt, mark the washers and sub-frame before removal to aid assembly.
CAUTION:
Make sure the wheel knuckle is supported. Failure to follow these instructions may result in damage to the vehicle.
NOTE:
Note the fitted position of each bolt, mark the washers and sub-frame before removal to aid assembly.
22. General Equipment: Powertrain Jack
Page 3021 of 3039
Page 3022 of 3039
1. CAUTION: Only tighten the bolts finger-tight at this stage.
2. CAUTION: Tighten the bolts in the sequence shown.
Torque:
Bolt 1 63 Nm Bolt 2 63 Nm Bolt 1 63 Nm
3. Torque: 12 Nm www.JagDocs.com
Page 3023 of 3039
5.
6. Install the special tool to the front subframe.
Special Tool(s): 502-005
Page 3024 of 3039
8. Torque:
Stage 1:80
9. Remove the special tool.
Special Tool(s): 502-005 Nm
240°
Stage 2: