2010 JAGUAR XFR Workshop Manual

gas typeandroid autofusebrakesdimensionsadblue
Popular search:
Rke moduledifferentialoverheatingair suspensionfour wheel driveb1b33wheel torque
Previous
Next
Load previous 8 pages

Page 377 of 3039

JAGUAR XFR 2010 1.G Workshop Manual 5. NOTES: Use an additional wrench to prevent the ball joint rotating. LH illustration shown, RH is similar. Disconnect the upper arm from the wheel knuckle. Remove and discard the nut.

Page 378 of 3039

JAGUAR XFR 2010 1.G Workshop Manual 2. NOTE: Use an additional wrench to prevent the ball joint rotating. Connect the upper arm and wheel knuckle. Tighten the nut to 90 Nm. 3. NOTE: Use an additional wrenc

Page 379 of 3039

JAGUAR XFR 2010 1.G Workshop Manual JLR-204-814 Remover/Installer, Lower Arm Bush

Page 380 of 3039

JAGUAR XFR 2010 1.G Workshop Manual General Equipment Removal NOTE: Removal and installation of the bush requires the use of a press. 1. Visually inspect the lower arm for signs of a center punch mark. If four marks are

Page 381 of 3039

JAGUAR XFR 2010 1.G Workshop Manual Installation). 3. Measure and note the value both sides of the bush as illustrated prior to removal.

Page 382 of 3039

JAGUAR XFR 2010 1.G Workshop Manual 4. CAUTION: Note the orientation of the bush prior to removal. Using suitable marking tools, mark the bush and lower arm prior to removal.

Page 383 of 3039

JAGUAR XFR 2010 1.G Workshop Manual General Equipment: Hydraulic press

Page 384 of 3039

JAGUAR XFR 2010 1.G Workshop Manual Installation 1. tool. NOTE: Make sure that the bush is correclty seated in the special Special Tool(s): JLR-204-815
Load next 8 pages
Page:   < prev 1-10 ... 345-352 353-360 361-368 369-376 377-384 385-392 393-400 401-408 409-416 ... 3040 next >
oil typeremove seatsserviceESP inoperativeradiator capairbag off
Popular search:
gas typeB1A54clock settingb1b33-05checking oilB100a 63P1674-48