2010 JAGUAR XFR Workshop Manual

Page 521 of 3039

JAGUAR XFR 2010 1.G Workshop Manual

Page 522 of 3039

JAGUAR XFR 2010 1.G Workshop Manual  
8.  CAUTION: Do not use the 5mm hole on the 
differential case flange for the alignment mark. 
 
 
NOTE: Using the 3mm hole on the differential case 
flange, paint an alignment mark (as indicated) t

Page 523 of 3039

JAGUAR XFR 2010 1.G Workshop Manual  
10. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
11. CAUTION: To avoid damage to the joint or gaiter, do 
not allow the driveshaft to hang. 
 
 
NOTE: Using a suitable hammer and drift, make sure

Page 524 of 3039

JAGUAR XFR 2010 1.G Workshop Manual Installation 
 
1.  CAUTION: Only tighten the bolts finger-tight at this 
stage. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2.  NOTE: Make sure that the alignment mark on the 
driveshaft is correc

Page 525 of 3039

JAGUAR XFR 2010 1.G Workshop Manual 3.  NOTES: 
 
 
This step only applies if a new driveshaft is being 
installed. 
 
 
Using the 3mm hole on the differential case flange 
and paint alignment mark on the driveshaft (as indicated). 
Mak

Page 526 of 3039

JAGUAR XFR 2010 1.G Workshop Manual         7.  Torque: 5 Nm 8. Torque: 7 Nm  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
9. Refer to: Exhaust System (309-00C Exhaust System - V8 5.0L Petrol/V8 S/C 5.0L Petrol, Removal and Installation).

Page 527 of 3039

JAGUAR XFR 2010 1.G Workshop Manual Cables, General Procedures).

Page 528 of 3039

JAGUAR XFR 2010 1.G Workshop Manual Differential fluid - vehicles without supercharger Castrol SAF XO (75W 90) Differential fluid - vehicles with supercharger Castrol BOT 720 (75W 90) Initial Specifications 
Item Specification Different