2006 INFINITI QX56 Factory Service Manual

wheel torque brake rotor fuel cap release air conditioning rear view mirror steering

Load previous 8 pages

Page 793 of 3383

INFINITI QX56 2006 Factory Service Manual BL-12
HOOD
Revision: November 20092006 QX56
HOODPFP:F5100
Fitting AdjustmentEIS004Q7
1. Hood hinge2. Hood stay 3. Hood lock assembly
4. Hood assembly 5. Front grille 6. Headlamp
7. Front fender 8. Fro

Page 794 of 3383

INFINITI QX56 2006 Factory Service Manual HOODBL-13
C
DE
F
G H
J
K L
M A
B
BL
Revision: November 2009 2006 QX56
CLEARANCE AND SURFACE HEIGHT ADJUSTMENT
1. Remove the front grille. Refer to EI-17, "FRONT GRILLE" .
2. Remove the hood lock assem

Page 795 of 3383

INFINITI QX56 2006 Factory Service Manual BL-14
HOOD
Revision: November 20092006 QX56
Removal and Installation of Hood Lock ControlEIS004Q9
REMOVAL
1. Remove the front fender protector (LH). Refer to EI-23, "FENDER PROTECTOR" .
2. Disconnect

Page 796 of 3383

INFINITI QX56 2006 Factory Service Manual HOODBL-15
C
DE
F
G H
J
K L
M A
B
BL
Revision: November 2009 2006 QX56
INSTALLATION
1. Pull the hood lock cable through the dash lower hole into the engine room.
Be careful not to bend the cable too mu

Page 797 of 3383

INFINITI QX56 2006 Factory Service Manual BL-16
POWER DOOR LOCK SYSTEM
Revision: November 20092006 QX56
POWER DOOR LOCK SYSTEMPFP:24814
Component Parts and Harness Connector LocationEIS005Z7
WIIA0585E

Page 798 of 3383

INFINITI QX56 2006 Factory Service Manual POWER DOOR LOCK SYSTEMBL-17
C
DE
F
G H
J
K L
M A
B
BL
Revision: November 2009 2006 QX56
System DescriptionEIS005Z8
Power is supplied at all times
through 50A fusible link (letter f, located in the f

POWER DOOR LOCK SYSTEMBL-17
C
DE
F
G H
J
K L
M A
B
BL
Revision: November 2009 2006 QX56
System DescriptionEIS005Z8
Power is supplied at all times
through 50A fusible link (letter f, located in the fuse and fusible link box)
to BCM terminal 70
through 15A fuse [No. 22, located in the fuse block (J/B)]
to BCM terminal 57
through 10A fuse [No. 19, located in the fuse block (J/B)]
to key switch and key lock solenoid terminal 3.
With ignition key inserted, power is supplied
through key switch and key lock solenoid terminal 4
to BCM terminal 37.
Ground is supplied to terminal 67 of BCM through body grounds M57, M61 and M79.
When the door is locked or unlocked with main power window and door lock/unlock switch, ground is supplied
to CPU of main power window and door lock/unlock switch
through main power window and door lock/unlock switch terminal 17
through grounds M57, M61 and M79.
Then main power window and door lock/unlock switch operation signal is supplied
to BCM terminal 22
through main power window and door lock/unlock switch terminal 14.
When the door is locked or unlocked with power window and door lock/unlock switch RH, ground is supplied
to CPU of power window and door lock/unlock switch RH
through power window and door lock/unlock switch RH terminal 11
through grounds M57, M61 and M79.
Then power window and door lock/unlock switch RH operation signal is supplied
to BCM terminal 22
through power window and door lock/unlock switch RH terminal 16.
When the door is locked with front door lock assembly LH (key cylinder switch), ground is supplied
to main power window and door lock/unlock switch terminal 4
through front door lock assembly LH (key cylinder switch) terminals 1 and 5
through grounds M57, M61 and M79.
Then front door lock assembly LH (key cylinder switch) operation signal is supplied
to BCM terminal 22
through main power window and door lock/unlock switch terminal 14.
When the door is unlocked with front door lock assembly LH (key cylinder switch), ground is supplied
to main power window and door lock/unlock switch terminal 6
through front door lock assembly LH (key cylinder switch) terminals 6 and 5
through grounds M57, M61 and M79.
Then front door lock assembly LH (key cylinder switch) operation signal is supplied
to BCM terminal 22
through main power window and door lock/unlock switch terminal 14.
BCM is connected to main power window and door lock/unlock switch and power window and door lock/unlock
switch RH through a bus.
When the front door switch LH is ON (door is open), ground is supplied
to BCM terminal 47
through front door switch LH terminal 2
through front door switch LH case ground.
When the front door switch RH is ON (door is open), ground is supplied
to BCM terminal 12
through front door switch RH terminal 2

Page 799 of 3383

INFINITI QX56 2006 Factory Service Manual BL-18
POWER DOOR LOCK SYSTEM
Revision: November 20092006 QX56
through front door switch RH case ground.
When the rear door switch LH is ON (door is open), ground is supplied
to BCM terminal 48
thro

Page 800 of 3383

INFINITI QX56 2006 Factory Service Manual POWER DOOR LOCK SYSTEMBL-19
C
DE
F
G H
J
K L
M A
B
BL
Revision: November 2009 2006 QX56
SchematicEIS005Z9
WIWA1534E

Load next 8 pages

Page: < prev 1-10 ... 761-768 769-776 777-784 785-792 793-800 801-808 809-816 817-824 825-832 ... 3384 next >

adblue reset wiper size alternator maintenance reset spare tire location run flat