Page 649 of 3383
AV-56
AUDIO
Revision: November 20092006 QX56
5. Remove Bose speaker amp. screws (A) and remove Bose
speaker amp. from Bose speaker amp./satellite radio tuner
bracket.
Installation
Installation is in the reverse order of removal.
CENTER SPEAKER
Removal
1. Remove center console. Refer to IP-16, "REMOVAL AND INSTALLATION" .
2. Remove cluster lid D. Refer to IP-12, "
Removal" .
3. Disconnect center speaker connectors.
4. Remove the center speaker screws and remove the center speaker.
Installation
Installation is in the reverse order of removal.
FRONT DOOR SPEAKER
Removal
1. Remove front door finisher. Refer to EI-32, "DOOR FINISHER" .
2. Remove the four front door speaker screws.
3. Disconnect connector and remove front door speaker.
Installation
Installation is in the reverse order of removal.
FRONT TWEETER
Removal
1. Remove front tweeter grille. Refer to IP-10, "INSTRUMENT PANEL ASSEMBLY" .
LKIA0678E
WKIA1799E
WKIA1498E
Page 650 of 3383
AUDIOAV-57
C
DE
F
G H
I
J
L
M A
B
AV
Revision: November 2009 2006 QX56
2. Remove front tweeter screws (A).
3. Disconnect connector and remove front tweeter.
Installation
Installation is in the reverse order of removal.
REAR AUDIO REMOTE CONTROL UNIT
Removal
1. Carefully remove the rear audio remote control unit from the rear
roof console assembly.
CAUTION:
Wrap removal tool with clean shop cloth to prevent damage
to the headliner.
2. Disconnect connector and remove the rear audio remote control unit.
Installation
Installation is in the reverse order of removal.
REAR DOOR SPEAKER
Removal
1. Remove rear door finisher. Refer to EI-32, "DOOR FINISHER" .
2. Remove the three rear door speaker screws and remove rear door speaker.
3. Disconnect rear door speaker connector.
Installation
Installation is in the reverse order of removal.
REAR DOOR TWEETER
Removal
1. Remove rear door finisher. Refer to EI-32, "DOOR FINISHER" .
WKIA4167E
WKIA1201E
WKIA1492E
Page 651 of 3383
AV-58
AUDIO
Revision: November 20092006 QX56
2. Remove rear door tweeter screws and remove rear door
tweeter.
3. Disconnect rear door tweeter connector.
Installation
Installation is in the reverse order of removal.
SATELLITE RADIO ANTENNA
Removal
1. Lower headliner. Refer to EI-38, "HEADLINING" .
2. Disconnect satellite radio antenna connector.
3. Remove satellite radio antenna nut.
4. Remove satellite radio antenna.
Installation
Installation is in the reverse order of removal.
SATELLITE RADIO TUNER
Removal
1. Remove BCM. Refer to BCS-20, "BCM" .
2. Remove the accelerator pedal. Refer to ACC-3, "
ACCELERATOR CONTROL SYSTEM" .
3. Disconnect Bose speaker amp. and satellite radio tuner connectors.
4. Remove Bose speaker amp./satellite radio tuner bracket screws and slide Bose speaker amp./satellite radio tuner bracket down.
WKIA1494E
LKIA0679E
WKIA1605E
Page 652 of 3383
AUDIOAV-59
C
DE
F
G H
I
J
L
M A
B
AV
Revision: November 2009 2006 QX56
5. Remove satellite radio tuner screws (A) and remove satellite
radio tuner from Bose speaker amp./satellite radio tuner bracket
(1).
Installation
Installation is in the reverse order of removal.
STEERING WHEEL AUDIO CONTROL SWITCHES
Removal
1. Remove steering wheel. Refer to PS-8, "Removal and Installation" .
2. Remove steering wheel rear cover screws and remove steering wheel rear cover.
3. Remove steering wheel switch assembly screws and steering wheel switches.
Installation
Installation is in the reverse order of removal.
SUBWOOFER
Removal
1. Remove front driver seat. Refer to SE-91, "Removal and Installation" .
2. Remove the subwoofer bolts.
3. Disconnect subwoofer connector and remove the subwoofer.
Installation
Installation is in the reverse order of removal.
LKIA0677E
WKIA1226E
WKIA1496E
Page 653 of 3383
AV-60
AUDIO ANTENNA
Revision: November 20092006 QX56
AUDIO ANTENNAPFP:28200
System DescriptionEKS00BJ1
With the ignition switch in ACC or ON, power is supplied
through 10A fuse [No. 4, located in the fuse block (J/B)]
to audio unit terminal 10.
Ground is supplied through the case of the antenna amp.
When the audio unit switch is turned ON, antenna signal is supplied
through audio unit terminal 5
to the antenna amp. terminal 1.
Then the antenna amp. is activated.
The amplified radio signals are supplied to the audio unit through the antenna amp.
Page 654 of 3383
AUDIO ANTENNAAV-61
C
DE
F
G H
I
J
L
M A
B
AV
Revision: November 2009 2006 QX56
Wiring Diagram — W/ANT —EKS00BJ2
WKWA2285E
Page 655 of 3383
AV-62
AUDIO ANTENNA
Revision: November 20092006 QX56
Location of AntennaEKS00BJ3
Window Antenna RepairEKS00BJ4
ELEMENT CHECK
1. Attach probe circuit tester (ohm setting) to antenna terminal on
each side.
WKIA4568E
←: To audio unit
1. Antenna Feeder 2. Satellite radio tuner 3. M48, M501
4. M64, M35 5. M502, M604 6. Satellite antenna feeder
7. Satellite antenna (if equipped, factory installed)
M351 8. Antenna amp
SEL250I
Page 656 of 3383
AUDIO ANTENNAAV-63
C
DE
F
G H
I
J
L
M A
B
AV
Revision: November 2009 2006 QX56
When measuring continuity, wrap tin foil around the top of
probe. Then, press the foil against the wire with your finger.
2. If an element is broken, no continuity will exist.
3. To locate a break, move probe along element. Tester indication will change abruptly when probe passes the broken point.
ELEMENT REPAIR
Refer to GW-92, "Filament Repair" .
SEL122R
SEL252I
SEL253I