Page 985 of 3383
BL-204
BODY REPAIR
Revision: November 20092006 QX56
WIIA0283E
Page 986 of 3383
BODY REPAIRBL-205
C
DE
F
G H
J
K L
M A
B
BL
Revision: November 2009 2006 QX56
REAR SIDE MEMBER
WIIA0281E
Page 987 of 3383
BL-206
BODY REPAIR
Revision: November 20092006 QX56
REAR FLOOR REAR
WIIA0282E
Page 988 of 3383
BODY REPAIRBL-207
C
DE
F
G H
J
K L
M A
B
BL
Revision: November 2009 2006 QX56
CRUSH HORN
Work after 1st crossmember has been removed.
Portions to be welded:
A. Inner side rail crush horn, inner side rail crush horn and outer side rail crush horn.
B. Outer side rail crush horn, outer side rail crush horn and inner side rail crush horn.
LIIA1083E
Page 989 of 3383
BL-208
BODY REPAIR
Revision: November 20092006 QX56
Removal Notes
Scribe a straight line on the outer side rail crush horn and inner side rail crush horn along the hole center
as shown in the figure.
Cut off outer side rail crush horn and inner side rail crush horn along scribed line A. Do not cut on the hole.
Cut inner side rail crush horn at 45 mm backward cut position of cut line A. (along line B)
LIIA1084E
LIIA1085E
Page 990 of 3383
BODY REPAIRBL-209
C
DE
F
G H
J
K L
M A
B
BL
Revision: November 2009 2006 QX56
After removing outer panel, dress area on the inner panel surface with a sander or equivalent.
LIIA1086E
Page 991 of 3383
BL-210
BODY REPAIR
Revision: November 20092006 QX56
Installation Notes
Scribe a straight line on the inner side rail crush horn along the hole center as shown in the figure. Cut off
inner side rail crush horn along scribed line.
Scribe a straight line on the outer side rail crush horn along the hole center as shown in the figure. Cut off
outer side rail crush horn along scribed line.
LIIA1087E
LIIA1088E
Page 992 of 3383
BODY REPAIRBL-211
C
DE
F
G H
J
K L
M A
B
BL
Revision: November 2009 2006 QX56
Weld part to be butt-welded and seam-welded corner to corner as shown in the figure.
LIIA1089E