1998 ISUZU TROOPER Service Repair Manual

Page 681 of 3573

ISUZU TROOPER 1998  Service Repair Manual 4C±15 DRIVE SHAFT SYSTEM
3. Remove bolt.
Before removal, shift transfer lever into ª2Hº position,
set free wheeling hub knob into ªFREEº position (1),
and run the vehicle about 50m (160 ft).
411R

Page 682 of 3573

ISUZU TROOPER 1998  Service Repair Manual 4C±16
DRIVE SHAFT SYSTEM
Inspection and Repair
Make necessary correction or parts replacement if wear,
damage, corrosion or any other abnormal condition are
found through inspection.
Check the follow

Page 683 of 3573

ISUZU TROOPER 1998  Service Repair Manual 4C±17 DRIVE SHAFT SYSTEM
11. Install follower to clutch so that follower nails (large)
(1) will come closer to the bent portion of retaining
spring by aligning follower stopper nail with outer
teeth

Page 684 of 3573

ISUZU TROOPER 1998  Service Repair Manual 4C±18
DRIVE SHAFT SYSTEM
17. Install oil seal by using installer  5±8840±2120±0 and
grip 5±8840±0007±0.
Apply grease (NLGI No.2 or equivalent) to the lip
portion.
411RW008
18. Install ABS senso

Page 685 of 3573

ISUZU TROOPER 1998  Service Repair Manual 4C±19 DRIVE SHAFT SYSTEM
21. Install lock washer and lock screw in the following
manner.
Turn the side with larger diameter of the tapered
bore to the vehicle outer side, and attach the
washer.
If

Page 686 of 3573

ISUZU TROOPER 1998  Service Repair Manual 4C±20
DRIVE SHAFT SYSTEM
Main Data and Specifications
Torque Specifications
E04RW022

Page 687 of 3573

ISUZU TROOPER 1998  Service Repair Manual 4C±21 DRIVE SHAFT SYSTEM
Special Tools
ILLUSTRATIONTOOL NO.
TOOL NAME
5±8840±2117±0
(J±36827)
Wrench; Hub nut
5±8840±2119±0
(J±36829)
Installer; Inner bearing
5±8840±2118±0
(J±36828)
Inst

Page 688 of 3573

ISUZU TROOPER 1998  Service Repair Manual 4C±22
DRIVE SHAFT SYSTEM
Front Drive Shaft Joint
Front Drive Shaft Joints Replace-
ment
Refer to Front Drive Axle Assembly Replacement in
this section, and refer to Front Hub and Disc in
Suspension