Page 3657 of 4323
BO1MO±03
BO±96
± BODYINSTRUMENT PANEL
3649 Author: Date:
2005 SEQUOIA (RM1146U)
REASSEMBLY
Reassembly is in the reverse order of disassembly (See page BO±95).
Page 3658 of 4323
BO43A±02
± BODYINSTRUMENT PANEL
BO±97
3650 Author: Date:
2005 SEQUOIA (RM1146U)
INSTALLATION
Installation is in the reverse order of removal (See page BO±89).
1. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
2. PERFORM INITIALIZATION (See page IN±20)
Some systems need initialization when disconnecting the cable from the negative battery terminal.
Page 3659 of 4323
BO4HM±01
H18897
Assist Gripw/ Rear A/C:
Rear No. 6 Air Duct
Roof Console BoxLens Map Lightw/ Rear No. 2 seat:
Assist Grip
Dome Light
LensRear Trim Roof Headlining
w/ Rear No. 2 seat:
Rear Trim Cover w/ Double Sun Visor:
Roof Headlining Roof Console Box
w/o Rear No. 2 seat:
Service Hole Cover
w/ Rear No. 2 seat:
Assist Grip
w/o Rear No. 2 seat:
Service Hole Cover
Sun VisorRoof Headlining
w/ Electro chrmic
inner rear view mirror:
Mirror Coverw/ Sliding roof:
Sun Visor
Sun Visor
Holder Holder
Assist Grip
Map Light
Lens
Sliding Roof Opening Trim
w/ Rear A/C:
Rear No.5 Air Duct
BO±98
± BODYROOF HEADLINING
3651 Author: Date:
2005 SEQUOIA (RM1146U)
ROOF HEADLINING
COMPONENTS
Page 3660 of 4323
H18896
w/ Rear seat entertainment:
Sliding Roof Opening Trim
Roof Console BoxRoof Headlining
Multi Information Display
Display Panel
Lens
± BODYROOF HEADLINING
BO±99
3652 Author: Date:
2005 SEQUOIA (RM1146U)
Page 3661 of 4323

H16754
Rear No. 3 Air Duct
w/o Rear A/C:
Rear No. 2 Side Rail Spacer
No. 1 Roof Headlining Trim Side Retainer w/ Rear A/C:
Front Side Rail Spacer
w/o Curtain shield
airbag assembly:
Front Pillar Spacer
Quarter Trim Panel
Front Door
Scuff PlateLower Center
Pillar GarnishQuarter Trim Panel w/ Rear No. 2 seat:
Quarter Trim Upper
Belt Hole Cover
Rear Door
Scuff Plate Center
Pillar
Garnish Assist Grip
Assist Grip
Front Door Opening
Trim Weatherstrip
Cowl Side Trim Board Front Pillar
GarnishFront Roof Headlining
Trim Retainer
Rear Roof
Headlining
Trim Retainer w/o Rear A/C:
Rear No. 2 Side
Rail Spacer
Rear Window
Side GarnishNo. 2 Rear
Window
Side Garnish
Rear Door
Opening Trim
Weatherstrip
w/o Rear No. 2 seat:
Quarter Trim Hole Cover
Rear Floor Mat
Support Plate
42 (430, 31)
42 (430, 31)
42 (430, 31)
42 (430, 31)
N´m (kgf´cm, ft´lbf)
: Specified torque
42 (430, 31)
42 (430, 31)
42 (430, 31)
42 (430, 31)42 (430, 31)
Assist Grip
BO±100
± BODYROOF HEADLINING
3653 Author: Date:
2005 SEQUOIA (RM1146U)
Page 3662 of 4323
BO4HN±04
H24383Claw
H16716
2 Clips
H16717
Clip
± BODYROOF HEADLINING
BO±101
3654 Author: Date:
2005 SEQUOIA (RM1146U)
REMOVAL
1. w/ Rear No 2 seat:
REMOVE REAR NO. 2 SEAT
2. REMOVE FRONT DOOR SCUFF PLATE
(a) Remove the 4 screws and front door scuff plate.
(b) Use the same manner described above to the other side.
3. REMOVE COWL SIDE TRIM BOARD
(a) Remove the nut and cowl side trim board.
(b) Use the same manner described above to the other side.
4. REMOVE FRONT DOOR OPENING TRIM WEATH-
ERSTRIP
5. REMOVE FRONT PILLAR GARNISH
(a) Remove the assist grip.
(1) Using a screwdriver, remove the 2 assist grip plugs.
HINT:
Tape the screwdriver tip before use.
(2) Remove the 2 screws and assist grip.
(b) Remove the front pillar garnish.
(c) Use the same manner described above to the other side.
Page 3663 of 4323

H16718
Clip
H16719
4 Clips
H10441
H17900
4 Claws BO±102
± BODYROOF HEADLINING
3655 Author: Date:
2005 SEQUOIA (RM1146U)
6. REMOVE REAR DOOR SCUFF PLATE
(a) Remove the 3 screws.
(b) Using a screwdriver, remove the rear door scuff plate.
HINT:
Tape the screwdriver tip before use.
(c) Use the same manner described above to the other side.
7. REMOVE REAR DOOR OPENING TRIM WEATH-
ERSTRIPS
8. REMOVE LOWER CENTER PILLAR GARNISH
(a) Remove the front seat outer belt floor anchor.
Torque: 42 N´m (430 kgf´cm, 31 ft´lbf)
(b) Using a screwdriver, remove the lower center pillar gar-
nish.
HINT:
Tape the screwdriver tip before use.
(c) Use the same manner described above to the other side.
9. REMOVE FRONT SEAT OUTER BELT SHOULDER AN-
CHOR
(a) Using a screwdriver, remove the anchor cap.
HINT:
Tape the screwdriver tip before use.
(b) Remove the front seat outer belt shoulder anchor.
Torque: 42 N´m (430 kgf´cm, 31 ft´lbf)
10. w/ Curtain shield airbag assembly:
REMOVE ASSIST GRIP
(a) Using a screwdriver, remove the cap.
HINT:
Tape the screwdriver tip before use.
(b) Remove the screw.
(c) Using a screwdriver, remove the No. 2 assist grip plug.
HINT:
Tape the screwdriver tip before use.
(d) Remove the 2 screws and assist grip.
(e) Use the same manner described above to the other side.
Page 3664 of 4323
H16720
4 Claws
H16721
Clip
H11151
H17633
w/o Rear No. 2 seat:
w/ Rear No. 2 seat:
± BODYROOF HEADLINING
BO±103
3656 Author: Date:
2005 SEQUOIA (RM1146U)
11. w/o Curtain shield airbag asseindly:
REMOVE ASSIST GRIP
(a) Using a screwdriver, remove the No. 2 assist grip piug.
HINT:
Tape the screwdriver tip before use.
(b) Remove the 2 screws and assist grip.
(c) Use the same manner described above to the other side.
12. REMOVE CENTER PILLAR GARNISH
(a) Remove the clip.
(b) Remove the center pillar garnish.
(c) Use the same manner described above to the other side.
13. REMOVE DOME LIGHT
(a) Using a screwdriver, remove the lens.
HINT:
Tape the screwdriver tip before use.
(b) Remove the 2 screws and dome light, then disconnect the
connector.
14. REMOVE REAR TRIM COVER
Using a screwdriver, remove the rear trim cover.
HINT:
Tape the screwdriver tip before use.