Page 3705 of 4323
H16762
H05324
H05730
H16763
BO±144
± BODYREAR NO.1 SEAT (Split Type LH)
3697 Author: Date:
2005 SEQUOIA (RM1146U)
5. REMOVE NO. 1 FOLD SEAT LOCK CONTROL CABLE
Remove the clamp and No. 1 fold seat lock control cable as
shown in the illustration.
6. REMOVE SEATBACK ASSEMBLY
(a) Remove the 3 screws and seat belt reclining detecting
part.
HINT:
At the time of reassembly, please refer to the following items.
Tighten the 2 screws on the seatback side.
Fold down the seatback forward and raise it up to the first
lock position.
Turn A to the rear side of the seat cushion for initial posi-
tioning.
Check visually that the reference holes are penetrated.
Tighten the screws on the cushion side of seat belt reclin-
ing detecting part.
(b) Remove the reclining connecting wire of LH side edge.
Page 3706 of 4323
H05326
H05331
H16764
± BODYREAR NO.1 SEAT (Split Type LH)
BO±145
3698 Author: Date:
2005 SEQUOIA (RM1146U)
(c) Remove the reclining connecting wire of RH side edge.
(d) Remove the 4 bolts and seatback assembly.
Torque: 41 N´m (420 kgf´cm, 30 ft´lbf)
7. REMOVE ARMREST
8. REMOVE SEATBACK FRAME
(a) Using a screwdriver, remove the rear seat shoulder belt
cover.
HINT:
Tape the screwdriver tip before use.
(b) Remove the 4 headrest supports
(c) Disengage the hooks, remove the seatback frame.
9. REMOVE SEAT ADJUSTER CONTROL CABLE
Remove the 2 clamps and seat adjuster control cable.
Page 3707 of 4323

H16765
H16766
H07940
BO±146
± BODYREAR NO.1 SEAT (Split Type LH)
3699 Author: Date:
2005 SEQUOIA (RM1146U)
10. REMOVE REAR SEAT OUTER BELT
(a) Remove the 2 bolts and rear seat shoulder belt guide.
Torque: 42 N´m (430 kgf´cm, 31 ft´lbf)
HINT:
At the time of reassembly, please refer to the following item.
Install the shoulder belt guide to the seatback frame with a sit
the guide facing to the rear side of the vehicle.
(b) Remove the nut, 3 clamps and rear seat outer belt.
Torque: 42 N´m (430 kgf´cm, 31 ft´lbf)
11. REMOVE SEATBACK COVER
Remove the hog rings and seatback cover.
HINT:
At the time of reassembly, please refer to the following item.
When instaling hog rings, take care to prevent wrinkles as little
as possible.
12. REMOVE SEAT CUSHION FRAME
Remove the hog rings and seat cushion frame.
HINT:
At the time of reassembly, please refer to the following item.
When instaling hog rings, take care to prevent wrinkles as little
as possible.
13. REMOVE REAR NO. 1 SEAT ADJUSTER
(a) Remove the 2 bolts and rear No. 1 seat outer adjuster.
Torque: 43 N´m (440 kgf´cm, 32 ft´lbf)
(b) Remove the 2 bolts and rear No. 1 seat inner adjuster.
Torque: 43 N´m (440 kgf´cm, 32 ft´lbf)
(c) Remove the 4 screws and 2 hinges covers from the rear
No. 1 seat outer and inner adjusters.
(d) Remove the 2 screws and 2 reclining inner covers from
the rear No. 1 seat outer and inner adjuster.
14. REMOVE REAR SEAT STAY
Remove the 2 bolts and rear seat stay.
15. REMOVE REAR SEAT CUSHION HINGE
(a) Using a screwdriver, remove the spring nut and E±rings.
(b) Remove the 2 hinge pins, 2 cushion spacers, 2 cushion
support springs and 2 rear seat cushion hinges.
16. REMOVE LH REAR SEAT LOCK
Unfasten the bolt, then remove the inner belt and LH rear seat
lock.
17. REMOVE RH REAR SEAT LOCK
(a) Remove the screw and rear seat lock cover.
(b) Remove the bolt, seat belt anchor and inner belt.
Torque: 42 N´m (430 kgf´cm, 31 ft´lbf)
(c) Remove the RH rear seat lock.
Page 3708 of 4323
BO4SK±01
± BODYREAR NO.1 SEAT (Split Type LH)
BO±147
3700 Author: Date:
2005 SEQUOIA (RM1146U)
REASSEMBLY
Reassembly is in the reverse order of disassembly (See page BO±143).
Page 3709 of 4323
BO4SL±01
BO±148
± BODYREAR NO.1 SEAT (Split Type LH)
3701 Author: Date:
2005 SEQUOIA (RM1146U)
INSTALLATION
Installation is in the reverse order of removal (See page BO±142).
Page 3710 of 4323
BO4SM±01
H16770
Headrest
Headrest
Support
Seatback CoverSeatback Pad
Seatback Frame
Seat Cushion
Cover
Seat Cushion Pad
Seat Cushion
Frame
Fold Seat
Stopper Band Rear Seat
Lock
Seat Cushion
Under cover RH Rear Seat
Reclining Adjuster
Cushion Seat Leg CoverRear No. 1 Seat
Inner Belt
No. 1 Rear Seat
Reclining CoverReclining Adjuster
Release Handle
LH Rear Seat
Reclining Adjuster
No. 1 Rear Seat
Reclining Cover
43 (440, 32)
Reclining
Connecting Pipe
42 (430, 31)
37 (380, 27)
37 (380, 27)
N´m (kgf´cm, ft´lbf) : Specified torque
43 (440, 32)
43 (440, 32)
43 (440, 32)
± BODYREAR NO.1 SEAT (Split Type RH)
BO±149
3702 Author: Date:
2005 SEQUOIA (RM1146U)
REAR NO.1 SEAT (Split Type RH)
COMPONENTS
Page 3711 of 4323
BO4SN±01
BO±150
± BODYREAR NO.1 SEAT (Split Type RH)
3703 Author: Date:
2005 SEQUOIA (RM1146U)
REMOVAL
REMOVE REAR NO.1 SEAT
(a) Fold the seatback down.
(b) Unlock the seat lock, and swing the whole seat up and forward.
(c) Using a screwdriver, remove the seat leg covers.
HINT:
Tape the screwdriver tip before use.
(d) Remove the 4 bolts and rear No.1 seat.
Torque: 37 N´m (380 kgf´cm, 27 ft´lbf)
Page 3712 of 4323

BO4SO±01
H17260
H17261
± BODYREAR NO.1 SEAT (Split Type RH)
BO±151
3704 Author: Date:
2005 SEQUOIA (RM1146U)
DISASSEMBLY
CAUTION:
Wear safety gloves, because the sharp edges and surfaces
of the seat frame may cause injury to the hands.
HINT:
A bolt without a torque specification is shown in the stan-
dard bolt chart (see page SS±2).
Tape the screwdriver tip before using it to remove the
parts.
1. REMOVE HEADREST
2. REMOVE RECLINING ADJUSTER RELEASE HANDLE
3. REMOVE NO. 1 REAR SEAT RECLINING COVER
(a) Remove the screw and No. 1 rear seat reclining cover.
(b) Employ the same manner described above to the other
side.
4. REMOVE SEATBACK ASSEMBLY
Remove the 4 bolts and seatback assembly.
Torque: 43 N´m (440 kgf´cm, 32 ft´lbf)
5. REMOVE SEATBACK COVER
(a) Remove the headrest supports.
(b) Remove the seatback frame from the seatback cover with
pad.
(c) Remove the seatback cover from the seatback pad.
6. REMOVE REAR SEAT CUSHION UNDER COVER
(a) Remove the screw and cushion.
(b) Remove the 7 screws and rear seat cushion under cover.
(c) Remove the screw and fold seat stopper band.