Page 3665 of 4323

H167249 Clips
H16725
H16726
H16727
BO±104
± BODYROOF HEADLINING
3657 Author: Date:
2005 SEQUOIA (RM1146U)
15. REMOVE REAR TRIM
Using a screwdriver, remove the rear trim.
HINT:
Tape the screwdriver tip before use.
16. REMOVE REAR FLOOR MAT SUPPORT PLATE
17. w/o Rear No. 2 seat:
REMOVE QUARTER TRIM HOLE COVER
(a) Using a screwdriver, remove the quarter trim hole cover.
HINT:
Tape the screwdriver tip before use.
(b) Use the same manner described above to the other side.
18. w/ Rear No. 2 seat:
REMOVE QUARTER TRIM UPPER BELT HOLE COV-
ER
(a) Using a screwdriver, remove the quarter trim upper belt
hole cover.
HINT:
Tape the screwdriver tip before use.
(b) Use the same manner described above to the other side.
19. REMOVE QUARTER TRIM PANEL LH
(a) w/o Rear A/C:
Using a screwdriver, remove the deck side trim cover.
HINT:
Tape the screwdriver tip before use.
(b) w/o Tonneau cover:
Using a screwdriver, remove the 2 No. 1 tonneau cover
holder caps.
HINT:
Tape the screwdriver tip before use.
(c) Remove the 2 package holder net hooks.
(d) Remove the rear No. 1 seat outer belt floor anchor.
Torque: 42 N´m (430 kgf´cm, 31 ft´lbf)
Page 3666 of 4323

H16728
6 Clips
4 Clips
H16729
H16730
6 Clips
4 Clips
H16731
2 Clips
Clip
± BODYROOF HEADLINING
BO±105
3658 Author: Date:
2005 SEQUOIA (RM1146U)
(e) Remove the 3 bolts, clip and quarter trim panel LH, then
disconnect the connector.
20. REMOVE QUARTER TRIM PANEL RH
(a) w/o Tonneau cover:
Using a screwdriver, remove the 2 No. 1 tonneau cover
holder caps.
HINT:
Tape the screwdriver tip before use.
(b) Remove the 2 package holder net hooks.
(c) Remove the rear No. 1 seat outer belt floor anchor.
Torque: 42 N´m (430 kgf´cm, 31 ft´lbf)
(d) Remove the 3 bolts, clip and quarter trim panel RH.
21. w/ Rear No. 2 seat:
REMOVE REAR NO. 2 SEAT OUTER BELT SHOUL-
DER ANCHORS
Torque: 42 N´m (430 kgf´cm, 31 ft´lbf)
22. REMOVE NO. 2 REAR WINDOW SIDE GARNISH
(a) Remove the 3 clips and No. 2 rear window side garnish.
(b) Use the same manner described above to the other side.
23. REMOVE REAR NO. 1 SEAT OUTER BELT SHOUL-
DER ANCHOR
(a) Using a screwdriver, remove the anchor cap.
HINT:
Tape the screwdriver tip before use.
(b) Remove the rear No. 1 seat outer belt shoulder anchor.
Torque: 42 N´m (430 kgf´cm, 31 ft´lbf)
(c) Use the same manner described above to the other side.
Page 3667 of 4323

H16732
7 Clips
2 Clips
H16733
H188952 Clips
H167342 Clips
H167354 Clips BO±106
± BODYROOF HEADLINING
3659 Author: Date:
2005 SEQUOIA (RM1146U)
24. REMOVE REAR WINDOW SIDE GARNISH
(a) Remove the rear window side garnish.
(b) Use the same manner described above to the other side.
25. w/ Sliding roof:
REMOVE MAP LIGHT
(a) Using a screwdriver, remove the lens.
HINT:
Tape the screwdriver tip before use.
(b) Remove the 2 screws and map light, then disconnect the
connector.
26. w/ Rear seat entertainment:
REMOVE INFORATION DISPLAY
(a) Remove the 2 lenses.
(b) Remove the 2 screws and display panel, then disconnect
the connector.
(c) Remove the 4 dolts and multi information display, then
disconnect the connector.
27. w/ Electro chrmic inner rear view mirror:
REMOVE MIRROR COVER
28. w/ Sliding roof:
REMOVE ROOF CONSOLE BOX
(a) Remove the 2 screws.
(b) Using a screwdriver, remove the roof console box.
HINT:
Tape the screwdriver tip before use.
(c) Disconnect the connector.
29. w/o Sliding roof:
REMOVE ROOF CONSOLE BOX
(a) Remove the 4 screws.
(b) Using a screwdriver, remove the roof console box.
HINT:
Tape the screwdriver tip before use.
(c) Disconnect the connectors.
30. REMOVE ASSIST GRIPS
31. w/ Sliding roof:
REMOVE SLIDING ROOF OPENING TRIM
Page 3668 of 4323
H16736
± BODYROOF HEADLINING
BO±107
3660 Author: Date:
2005 SEQUOIA (RM1146U)
32. REMOVE SUN VISORS AND HOLDERS
33. REMOVE ROOF HEADLINING
(a) Using a clip remover, remove the 2 clips.
(b) Remove the roof headlining.
34. w/ Rear A/C:
REMOVE REAR AIR DUCTS
35. w/ Rear A/C:
REMOVE FRONT SIDE RAIL SPACERS
36. w/o Rear A/C:
REMOVE REAR NO. 2 SIDE RAIL SPACERS
37. w/o Curtain shield airbag assembly:
REMOVE FRONT PILLAR SPACERS
38. REMOVE FRONT ROOF HEADLINING TRIM RETAIN-
ERS
39. REMOVE REAR ROOF HEADLINING TRIM RETAIN-
ERS
40. REMOVE NO. 1 ROOF HEADLINING TRIM SIDE RE-
TAINERS
Page 3669 of 4323
BO46X±01
BO±108
± BODYROOF HEADLINING
3661 Author: Date:
2005 SEQUOIA (RM1146U)
INSTALLATION
Installation is in the reverse order of removal (See page BO±101).
Page 3670 of 4323
BO46Y±01
H16753
Side Door Step
Plate Cover
Step Cover
Protector
Step Plate
Side Step Bracket
No. 3 Side Step Bracket
No. 2 Side Step Bracket
No. 1 Side Step Bracket Step Cover
Protector
N´m (kgf´cm, ft´lbf) : Specified torque
19 (195, 14)
19 (195, 14)
19 (195, 14)
19 (195, 14)
4.9 (50, 43 in.´lbf)
4.9 (50, 43 in.´lbf)
4.9 (50, 43 in.´lbf)
4.9 (50, 43 in.´lbf)
± BODYSIDE STEP
BO±109
3662 Author: Date:
2005 SEQUOIA (RM1146U)
SIDE STEP
COMPONENTS
Page 3671 of 4323

BO4S6±01
H24329
37 (380, 27)
37 (380, 27)
37 (380, 27)
37 (380, 27)
37 (380, 27)
42 (430, 32) Seatback Cover
Seat Cushion
Cover
Seat Cushion
PadArmrest CapArmrest Spacer
Armrest
Lock Plate
Spacer
Armrest
AssemblyHeadrest
Headrest Support Seatback Pad
Lumbar Support
Adjuster
Seat Frame Assembly Seat Position Sensor
Protector
Seat Position
Sensor
Seat Cushion
Inner Shield
Seat Cushion
Lower ShieldFront Seat Inner BeltRH Reclining
Adjuster Inside
CoverRH Seatback
ShieldVertical Adjuster
Bracket Inner Cover
Vertical Adjuster
Bracket Outer Cover
LH Reclining
Adjuster Inside Cover
Reclining Knob
Slide Knob
Seat Cushion Outer ShieldLumbar Switch Power Seat SwitchLH Seatback Shield
Hog RingSeat Track
Cover
Seat Track
CoverBushing
Hog Ring
Non±reusable part: Specified torque
N´m (kgf´cm, ft´lbf)
w/ Side airbag:
5.5 (56, 49 in.´lbf)
w/ Seat heater:
w/ Seat heater:
Seat Cushion Heater Assembly
Seatback
Heater Assembly
Occupant Classification ECUPassenger's seat:
Driver's seat:
Driver's seat:
BO±110
± BODYFRONT SEAT (Power Adjuster Type)
3663 Author: Date:
2005 SEQUOIA (RM1146U)
FRONT SEAT (Power Adjuster Type)
COMPONENTS
HINT:
The procedures listed below are for the LH side.
Page 3672 of 4323

BO4S7±01
± BODYFRONT SEAT (Power Adjuster Type)
BO±111
3664 Author: Date:
2005 SEQUOIA (RM1146U)
REMOVAL
CAUTION:
Work must not be started until at least 90 seconds after the ignition switch is turned to the LOCK posi-
tion and the negative (±) terminal cable is disconnected from the battery.
(The SRS is equipped with a back±up power source. If work is started within 90 seconds from discon-
necting the negative (±) terminal cable of the battery, the SRS may deploy.)
NOTICE:
When removing/installing and overhauling the passenger seat, check the passenger occupant clas-
sification system and perform the zero point calibration (see page DI±1128).
HINT:
The procedures listed below are for the LH side.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Wait for 90 seconds after disconnecting the cable to prevent the airbag working.
2. REMOVE SEAT TRACK COVERS
Using a screwdriver, remove the seat track covers.
HINT:
Tape the screwdriver tip before use.
3. REMOVE FRONT SEAT
(a) Remove the 4 bolts.
(b) Disconnect the connectors.
(c) w/ Side airbag:
Disconnect the airbag connector.
(d) Remove the front seat.
NOTICE:
Be careful not to damage the body.