Page 57 of 4323
B13807
A: Propeller Shaft Spiders
B: Propeller Shaft Sliding YokesAB
A
A
MA0568
MA±10
± MAINTENANCECHASSIS
57 Author: Date:
2005 SEQUOIA (RM1146U)
(b) Recoat the drive shaft thrust bush with grease (See page
SA±34).
11. 4WD:
LUBRICATE PROPELLER SHAFT AND TIGHTEN
BOLTS
(a) Lubricate the propeller shaft, referring to the lubrication
chart. Before pumping in grease, wipe off any mud and
dust on the grease fitting.
Grease grade:
Propeller shaft (Except Double±cardan joint)
Lithium base chassis grease NLGI No.2
(b) Tighten the bolts for propeller shaft.
(2WD: See page PR±5)
(4WD: See page PR±9)
12. ROTATE TIRE (See page SA±3)
13. TIGHTEN BOLTS AND NUTS ON CHASSIS AND BODY
(a) Tighten the following parts:
Seat mounting bolts
Torque:
37 N´m (375 kgf´cm, 27 ft´lbf)
Page 58 of 4323
B02100
± MAINTENANCECHASSIS
MA±11
58 Author: Date:
2005 SEQUOIA (RM1146U)
Leaf spring U±bolt mounting nuts
Torque: 133 N´m (1,350 kgf´cm, 98 ft´lbf )
(b) Under Severe Conditions:
In addition to the above maintenance items, check for
loose or missing bolts and nuts on the following.
Steering system
Drive train
Suspension system
Fuel tank mounts
Engine mounts, etc.
14. FINAL INSPECTION
(a) Check operation of body parts:
Hood:
Auxiliary catch operates properly
Hood locks securely when closed
Doors:
Door locks operate properly
Doors close properly
Seats:
Seat adjusts easily and locks securely in any
positions
Seat backs lock securely at any angle
Fold±down seat backs lock securely
(b) Road test:
Engine and chassis parts do not have abnormal
noises.
Vehicle does not wander or pull to one side.
Brakes work properly and do not drag.
(c) Be sure to deliver a clean vehicle and especially check:
Steering wheel
Shift lever knob
All switch knobs
Door handles
Seats
Page 59 of 4323
PP1D4±02
± PREPARATIONMAINTENANCE
PP±1
59 Author: Date:
2005 SEQUOIA (RM1146U)
MAINTENANCE
EQUIPMENT
MirrorBrake hose
Page 60 of 4323
PP1D5±02
PP±2
± PREPARATIONMAINTENANCE
60 Author: Date:
2005 SEQUOIA (RM1146U)
LUBRICANT
ItemCapacityClassification
Brake fluid±SAE J1703 or FMVSS No.116 DOT3
Page 61 of 4323
PP42W±01
± PREPARATIONENGINE MECHANICAL
PP±3
61 Author: Date:
2005 SEQUOIA (RM1146U)
ENGINE MECHANICAL
SST (Special Service Tools)
09201±01055Valve Guide Bushing Remover & Re
placer 5.5
09201±41020Valve Stem Oil Seal Replacer
09202±70020Valve Spring Compressor
(09202±00010)Attachment
09213±70011Crankshaft Pully Holding Tool
(90105±08076)Bolt
(90119±08216)Bolt
09222±30010Connecting Rod Bushing Remover
& Replacer
09223±46011Crankshaft Front Oil Seal
ReplacerCrankshaft pulley
Crankshaft timing pulley
09223±56010Crankshaft Rear Oil Seal
Replacer
09330±00021Companion Flange Holding ToolCrankshaft pulley
09843±18030Tacho±pulse Pickup Wire No.2
Page 62 of 4323
PP±4
± PREPARATIONENGINE MECHANICAL
62 Author: Date:
2005 SEQUOIA (RM1146U)
09843±18040Diagnosis Check Wire No.2
09950±50013Puller C Set
(09951±05010)Hanger 150Crankshaft pulley
Crankshaft timing pulley
(09952±05010)Slide ArmCrankshaft pulley
Crankshaft timing pulley
(09953±05010)Center Bolt 100Crankshaft pulley
Crankshaft timing pulley
(09953±05020)Center Bolt 150Crankshaft pulley
Crankshaft timing pulley
(09954±05011)Claw No.1Crankshaft timing pulley
(09954±05021)Claw No.2Crankshaft pulley
09950±60010Replacer Set
(09951±00240)Replacer 24
(09951±00440)Replacer 44
(09952±06010)Adapter
09950±70010Handle Set
Page 63 of 4323
± PREPARATIONENGINE MECHANICAL
PP±5
63 Author: Date:
2005 SEQUOIA (RM1146U)
(09951±07100)Handle 100Spark plug tube
Valve guide bushing
09960±10010Variable Pin Wrench Set
(09962±01000)Variable Pin Wrench Arm AssyCamshaft sub±gear
(09963±00400)Pin 4Camshaft sub±gear
(09963±00500)Pin 5Camshaft sub±gear
(09963±01000)Pin 10Camshaft sub±gear
Page 64 of 4323
PP1BL±10
PP±6
± PREPARATIONENGINE MECHANICAL
64 Author: Date:
2005 SEQUOIA (RM1146U)
RECOMMENDED TOOLS
09040±00011Hexagon Wrench Set .
09090±04020Engine Sling DeviceFor suspension engine
09200±00010Engine Adjust Kit .
09258±00030Hose Plug Set .Plug for vacuum hose, fuel hose etc.
09904±00010Expander Set .