Page 3145 of 4323
SA175±05
F05063
SST
SST
F14312
SST
SST
± SUSPENSION AND AXLECOIL SPRING AND REAR SHOCK ABSORBER
SA±141
3137 Author: Date:
2005 SEQUOIA (RM1146U)
REPLACEMENT
1. Normal Type:
REMOVE BUSHING
Using SST and a press, remove the bushing.
SST 09710±14013 (09710±00061),
09710±28012 (09710±07031),
09950±70010 (09951±07100)
2. Normal Type:
INSTALL BUSHING
Using SST and a press, install a new bushing.
SST 09710±14013 (09710±00061),
09710±28012 (09710±07031),
09950±70010 (09951±07100)
Page 3146 of 4323
SA176±04
SA±142
± SUSPENSION AND AXLECOIL SPRING AND REAR SHOCK ABSORBER
3138 Author: Date:
2005 SEQUOIA (RM1146U)
INSTALLATION
Installation is in the reverse order of removal (See page SA±137).
Page 3147 of 4323
SA177±04
F14296
Lateral Control Rod
N´m (kgf´cm, ft´lbf) : Specified torque
130 (1,326, 96)
140 (1,428, 103)
Non±reusable part
± SUSPENSION AND AXLEREAR LATERAL CONTROL ROD
SA±143
3139 Author: Date:
2005 SEQUOIA (RM1146U)
REAR LATERAL CONTROL ROD
COMPONENTS
Page 3148 of 4323
SA178±04
F14297
A
B SA±144
± SUSPENSION AND AXLEREAR LATERAL CONTROL ROD
3140 Author: Date:
2005 SEQUOIA (RM1146U)
REMOVAL
1. SUPPORT REAR AXLE HOUSING WITH JACK
2. REMOVE LATERAL CONTROL ROD
Remove the 2 bolts, nut, washer and lateral control rod.
Torque:
A 140 N´m (1,428 kgf´cm, 103 ft´lbf)
B 130 N´m (1,326 kgf´cm, 96 ft´lbf)
HINT:
At the time of installation, please refer to the following items.
Replace the used nut with a new one.
After stabilizing the suspension, torque the nut and bolt.
Page 3149 of 4323
SA179±01
± SUSPENSION AND AXLEREAR LATERAL CONTROL ROD
SA±145
3141 Author: Date:
2005 SEQUOIA (RM1146U)
INSTALLATION
Installation is in the reverse order of removal (See page SA±144).
Page 3150 of 4323
SA17B±05
F14298
Speed Sensor
Wire Harness
Lower Control Arm
N´m (kgf´cm, ft´lbf) : Specified torque
Upper Control Arm
140 (1,428, 103)
140 (1,428, 103)
28 (286, 21)
130 (1,326, 96)
26 (265, 19)
Parking Brake Cable130 (1,326, 96)
Brake Line
Bracket
SA±146
± SUSPENSION AND AXLEREAR UPPER AND LOWER CONTROL ARM
3142 Author: Date:
2005 SEQUOIA (RM1146U)
REAR UPPER AND LOWER CONTROL ARM
COMPONENTS
Page 3151 of 4323
SA24J±02
F14299
F14300
± SUSPENSION AND AXLEREAR UPPER AND LOWER CONTROL ARM
SA±147
3143 Author: Date:
2005 SEQUOIA (RM1146U)
REMOVAL
1. REMOVE REAR WHEEL
Torque: 110 N´m (1,150 kgf´cm, 83 ft´lbf)
2. SUPPORT REAR AXLE HOUSING WITH JACK
3. REMOVE UPPER CONTROL ARM
(a) Disconnect the speed sensor wire harness.
(b) Remove the bolt and brake line bracket.
Torque: 28 N´m (286 kgf´cm, 21 ft´lbf)
(c) Remove the 2 nuts, washers, bolts and upper control arm.
Torque: 140 N´m (1,428 kgf´cm, 103 ft´lbf)
HINT:
At the time of installation, after stabilizing the suspension,
torque the nuts.
4. REMOVE LOWER CONTROL ARM
(a) Remove the bolt and parking brake cable bracket.
Torque: 26 N´m (265 kgf´cm, 19 ft´lbf)
(b) Remove the 2 nuts, bolts and lower control arm.
Torque: 130 N´m (1,326 kgf´cm, 96 ft´lbf)
HINT:
At the time of installation, after stabilizing the suspension,
torque the nuts.
Page 3152 of 4323
SA17D±01
SA±148
± SUSPENSION AND AXLEREAR UPPER AND LOWER CONTROL ARM
3144 Author: Date:
2005 SEQUOIA (RM1146U)
INSTALLATION
Installation is in the reverse order of removal (See page SA±147).