Page 1689 of 4331
![NISSAN LATIO 2009 Service Repair Manual P0455 EVAP CONTROL SYSTEM
EC-333
< COMPONENT DIAGNOSIS >
[HR16DE] C
D E
F
G H
I
J
K L
M A EC
NP
O
NO >> Replace EVAP canister purge volume control solenoid valve. 15.
CHECK FUEL TANK TEMPERATURE SENSO NISSAN LATIO 2009 Service Repair Manual P0455 EVAP CONTROL SYSTEM
EC-333
< COMPONENT DIAGNOSIS >
[HR16DE] C
D E
F
G H
I
J
K L
M A EC
NP
O
NO >> Replace EVAP canister purge volume control solenoid valve. 15.
CHECK FUEL TANK TEMPERATURE SENSO](/manual-img/5/57359/w960_57359-1688.png)
P0455 EVAP CONTROL SYSTEM
EC-333
< COMPONENT DIAGNOSIS >
[HR16DE] C
D E
F
G H
I
J
K L
M A EC
NP
O
NO >> Replace EVAP canister purge volume control solenoid valve. 15.
CHECK FUEL TANK TEMPERATURE SENSOR
Refer to EC-244, " Component Inspection " .
Is the inspection result normal? YES >> GO TO 16.
NO >> Replace fuel level sensor unit. 16.
CHECK EVAP CONTROL SYSTEM PRESSURE SENSOR
Refer to EC-314, " Component Inspection " .
Is the inspection result normal? YES >> GO TO 17.
NO >> Replace EVAP control system pressure sensor. 17.
CHECK EVAP/ORVR LINE
Check EVAP/ORVR line between EVAP canister and fuel tank for clogging, kink, looseness and improper con-
nection. For location, refer to EC-450, " Description " .
Is the inspection result normal? YES >> GO TO 18.
NO >> Repair or replace hoses and tubes. 18.
CHECK RECIRCULATION LINE
Check recirculation line between fuel filler tube and fuel tank for clogging, kink, cracks, looseness and
improper connection.
Is the inspection result normal? YES >> GO TO 19.
NO >> Repair or replace hose, tube or fuel filler tube. 19.
CHECK REFUELING EVAP VAPOR CUT VALVE
Refer to EC-453, " Component Inspection (Refueling EVAP vapor cut valve) " .
Is the inspection result normal? YES >> GO TO 20.
NO >> Replace refueling EVAP vapor cut valve with fuel tank. 20.
CHECK INTERMITTENT INCIDENT
Refer to EC-120, " Diagnosis Procedure " .
>> INSPECTION END
Component Inspection (Fuel filler cap) INFOID:00000000048031171.
CHECK FUEL FILLER CAP
1. Turn ignition switch OFF.
2. Remove fuel filler cap.
3. Wipe clean valve housing. SEF445Y
Page 1690 of 4331
YES >> INSPECTION END
NO >> GO TO 2. YES >> INSPECTION END
NO >> Replace drain filter. Pressure:
15.3 - 20.0 kPa (0.156 - 0.204 kg/cm 2
, 2.22 -
2.90 psi)
Vacuum: −6.0 to −3.3 kPa ( −0.061 to −0.034 kg/cm 2
,
− 0.87 to −0.48 psi)
Page 1691 of 4331
![NISSAN LATIO 2009 Service Repair Manual P0456 EVAP CONTROL SYSTEM
EC-335
< COMPONENT DIAGNOSIS >
[HR16DE] C
D E
F
G H
I
J
K L
M A EC
NP
O
P0456 EVAP CONTROL SYSTEM
DTC Logic INFOID:0000000004780206
DTC DETECTION LOGIC This diagnosis detects NISSAN LATIO 2009 Service Repair Manual P0456 EVAP CONTROL SYSTEM
EC-335
< COMPONENT DIAGNOSIS >
[HR16DE] C
D E
F
G H
I
J
K L
M A EC
NP
O
P0456 EVAP CONTROL SYSTEM
DTC Logic INFOID:0000000004780206
DTC DETECTION LOGIC This diagnosis detects](/manual-img/5/57359/w960_57359-1690.png)
P0456 EVAP CONTROL SYSTEM
EC-335
< COMPONENT DIAGNOSIS >
[HR16DE] C
D E
F
G H
I
J
K L
M A EC
NP
O
P0456 EVAP CONTROL SYSTEM
DTC Logic INFOID:0000000004780206
DTC DETECTION LOGIC This diagnosis detects very small leaks in the EVAP line between fuel tank and EVAP canister purge volume
control solenoid valve, using the intake manifold vac uum in the same way as conventional EVAP small leak
diagnosis.
If ECM judges a leak which corresponds to a very small leak, the very small leak P0456 will be detected.
If ECM judges a leak equivalent to a small leak, EVAP small leak P0442 will be detected.
If ECM judges there are no leaks, the diagnosis will be OK.
CAUTION:
• Use only a genuine NISSAN fuel filler cap as a replacemen t. If an incorrect fuel filler cap is used, the
MIL may come on.
• If the fuel filler cap is not tigh tened properly, the MIL may come on.
DTC No. Trouble diagnosis name DTC detecting condition Possible cause
P0456 Evaporative emission
control system very
small leak (negative
pressure check) • EVAP system has a very small leak.
• EVAP system does not operate prop- erly. • Incorrect fuel tank vacuum relief valve
• Incorrect fuel filler cap used
• Fuel filler cap remains open or fails to close.
• Foreign matter caught in fuel filler cap.
• Leak is in line between intake manifold and EVAP
canister purge volume control solenoid valve.
• Foreign matter caught in EVAP canister vent con- trol valve.
• EVAP canister or fuel tank leaks
• EVAP purge line (pipe and rubber tube) leaks
• EVAP purge line rubber tube bent
• Loose or disconnected rubber tube
• EVAP canister vent control valve and the circuit
• EVAP canister purge volume control solenoid
valve and the circuit
• Fuel tank temperature sensor
• O-ring of EVAP canister vent control valve is miss-
ing or damaged
• EVAP canister is saturated with water
• EVAP control system pressure sensor
• Refueling EVAP vapor cut valve
• ORVR system leaks
• Fuel level sensor and the circuit
• Foreign matter caught in EVAP canister purge vol- ume control solenoid valve
• Drain filter PBIB1026E
Page 1692 of 4331
YES >> GO TO 2.
NO >> GO TO 4. BASIC INSPECTION : Special Repair Requirement " .
Which is displayed on CONSULT-III? OK >> INSPECTION END
NG >> Go to EC-337, " Diagnosis Procedure " .
Component Function Check " .
NOTE:
Use component function check to check the overall function of the EVAP very small leak function. During this
check, a 1st trip DTC might not be confirmed.
Is the inspection result normal? YES >> INSPECTION END
Page 1693 of 4331
EC
NP
O
NO >> Go to
EC-337, " Diagnosis Procedure " .
Component Function Check INFOID:0000000004780207YES >> GO TO 2.
NO >> Go to EC-337, " Diagnosis Procedure " .
YES >> GO TO 2.
NO >> Replace with genuine NISSAN fuel filler cap. SEF915U
Page 1694 of 4331
![NISSAN LATIO 2009 Service Repair Manual EC-338< COMPONENT DIAGNOSIS >
[HR16DE]
P0456 EVAP CONTROL SYSTEM
Is the inspection result normal? YES >> GO TO 3.
NO >> Open fuel filler cap, then clean cap and fuel filler neck threads us NISSAN LATIO 2009 Service Repair Manual EC-338< COMPONENT DIAGNOSIS >
[HR16DE]
P0456 EVAP CONTROL SYSTEM
Is the inspection result normal? YES >> GO TO 3.
NO >> Open fuel filler cap, then clean cap and fuel filler neck threads us](/manual-img/5/57359/w960_57359-1693.png)
EC-338< COMPONENT DIAGNOSIS >
[HR16DE]
P0456 EVAP CONTROL SYSTEM
Is the inspection result normal? YES >> GO TO 3.
NO >> Open fuel filler cap, then clean cap and fuel filler neck threads using air blower. Then retighten
until ratcheting sound is heard. 3.
CHECK FUEL FILLER CAP FUNCTION
Check for air releasing sound while opening the fuel filler cap.
Is the inspection result normal? YES >> GO TO 5.
NO >> GO TO 4. 4.
CHECK FUEL TANK VACUUM RELIEF VALVE
Refer to EC-340, " Component Inspection (Fuel filler cap) " .
Is the inspection result normal? YES >> GO TO 5.
NO >> Replace fuel filler cap with a genuine one. 5.
CHECK FOR EVAP LEAK
Refer to EC-500, " Inspection " .
Is there any leak in EVAP line? YES >> Repair or replace.
NO >> GO TO 6. 6.
CHECK DRAIN FILTER
Refer to EC-341, " Component Inspection (Drain filter) " .
Is the inspection result normal? YES >> GO TO 7.
NO >> Replace drain filter. 7.
CHECK EVAP CANISTER VENT CONTROL VALVE
Check the following.
• EVAP canister vent control valve is installed properly.
Refer to EC-502, " Exploded View " .
• EVAP canister vent control valve. Refer to EC-304, " Component Inspection " .
Is the inspection result normal? YES >> GO TO 8.
NO >> Repair or replace EVAP cani ster vent control valve and O-ring.8.
CHECK IF EVAP CANISTER IS SATURATED WITH WATER
1. Remove EVAP canister with EVAP canister vent control valve and EVAP control system pressure sensor
attached.
2. Check if water will drain from the EVAP canister.
Does water drain from EVAP canister? YES >> GO TO 9.
NO-1 >> With CONSULT-III: GO TO 11.
NO-2 >> Without CONSULT-III: GO TO 12. 9.
CHECK EVAP CANISTER
Weigh the EVAP canister with the EVAP canister vent control valve and EVAP control system pressure sensor
attached.
The weight should be less than 1.9 kg (4.2 lb). PBIB1213E
Page 1695 of 4331
EC
NP
O
Is the inspection result normal? YES-1 >> With CONSULT-III: GO TO 11.
YES-2 >> Without CONSULT-III: GO TO 12.
NO >> GO TO 10. YES >> GO TO 14.
NO >> GO TO 13. YES >> GO TO 15.
NO >> GO TO 13. System Description " .
Is the inspection result normal? YES >> GO TO 14.
NO >> Repair or reconnect the hose. Diagnosis Procedure " .
Is the inspection result normal? YES >> GO TO 15.
NO >> Replace EVAP canister purge volume control solenoid valve. Component Inspection " .
Is the inspection result normal? YES >> GO TO 16.
NO >> Replace fuel level sensor unit. Vacuum should exist.
Page 1696 of 4331
Component Inspection " .
Is the inspection result normal? YES >> GO TO 17.
NO >> Replace EVAP control system pressure sensor. System Description " .
Is the inspection result normal? YES >> GO TO 18.
NO >> Repair or reconnect the hose. Description " .
Is the inspection result normal? YES >> GO TO 20.
NO >> Repair or replace hoses and tubes. YES >> GO TO 21.
NO >> Repair or replace hose, tube or fuel filler tube. Component Inspection (Refueli
ng EVAP vapor cut valve) " .
Is the inspection result normal? YES >> GO TO 22.
NO >> Replace refueling EVAP vapor cut valve with fuel tank. Fuel Level Sensor Signal Inspection " .
Is the inspection result normal? YES >> GO TO 23.
NO >> Replace fuel level sensor unit. Diagnosis Procedure " .
>> INSPECTION END
Component Inspection (Fuel filler cap) INFOID:0000000004803118