Page 3337 of 4331
Removal and Installa-
tion " .
OK >> Replace front power window motor LH. Refer to
GW-44 .
NG >> Repair or replace harness.
Front Power Window RH Circuit Inspecti on (Power Window and Door Lock/Unlock
Switch RH Operation) INFOID:0000000004306868OK >> Replace power window and door lock/unlock switch RH.
Refer to EI-34, " Removal and Installation " .
NG >> Repair or replace harness.
Front Power Window Moto r RH Circuit Inspection INFOID:0000000004306869 PIIB6431E
Page 3338 of 4331
GW
N
O P
OK or NG OK >> Replace front power window motor RH. Refer to
GW-44 .
NG >> GO TO 2. OK >> GO TO 3.
NG >> Repair or replace harness. OK >> GO TO 4.
NG >> Replace power window and door lock/unlock switch RH. Refer to EI-34, " Removal and Installa-
tion " .
Page 3339 of 4331
OK >> Replace main power window and door lock/unlock switch. Refer to
EI-34, " Removal and Installa-
tion " .
NG >> Repair or replace harness.
Encoder Circuit Inspection INFOID:0000000004306870OK >> GO TO 3.
NG >> GO TO 2.
Page 3340 of 4331
GW
N
O P
OK or NG OK >> Replace main power window and door lock/unlock switch. Refer to
EI-34, " Removal and Installa-
tion " .
NG >> Repair or replace harness. OK >> GO TO 5.
NG >> GO TO 4. OK >> Replace main power window and door lock/unlock
switch. Refer to EI-34, " Removal and Installation " .
NG >> Repair or replace harness. OK >> Replace main power window and door lock/unlock switch. Refer to
EI-34, " Removal and Installa-
tion " .
NG >> GO TO 6. OCC3383D
Page 3341 of 4331

GW-38< SERVICE INFORMATION >
POWER WINDOW SYSTEM
Check the signal between main power window and door lock/unlock
switch connector and ground with oscilloscope.
OK or NG OK >> Replace main power window and door lock/unlock switch. Refer to
EI-34, " Removal and Installa-
tion " .
NG >> GO TO 7. 7.
CHECK ENCODER CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect front power window motor LH and main power win-
dow and door lock/unlock switch.
3. Check continuity between front power window motor LH connec-
tor and main power window and door lock/unlock switch connec-
tor.
4. Check continuity between front power window motor LH connector and ground.
OK or NG OK >> Replace front power window motor LH. Refer to
GW-44 .
NG >> Repair or replace harness.
Door Switch Check INFOID:00000000043068711.
CHECK FRONT DOOR SWITCH INPUT SIGNAL
With CONSULT-III
Check front door switches (“DOOR SW-DR” and “D OOR SW-AS”) in “DATA MONITOR” mode with CON-
SULT-III. Connec-
tor Terminals
Condition Signal
(+) (-)
D7 9 Ground Opening LIIA2633E
OCC3383D
Connector TerminalConnector
Terminal Continuity
A B
Main power win-
dow and door lock/
unlock switch: D7 9
Front power window
motor LH: D9 5
Yes
13 4
Connector Terminal
GroundContinuity
A
Main power window and door
lock/unlock switch: D7 9
No
13 PIIB6437E
Monitor item Condition
DOOR SW-DR OPEN: ON
CLOSE: OFF
DOOR SW-AS OPEN: ON
CLOSE: OFF
Page 3342 of 4331
GW
N
O P
Without CONSULT-III
Check voltage between BCM connector and ground.
OK or NG OK >> Front door switch is OK.
NG >> GO TO 2. OK >> GO TO 3.
NG >> Repair or replace harness. OK >> Replace BCM. Refer to
BCS-18, " Removal and Installa-
tion of BCM " .
NG >> Replace malfunctioning front door switch.
Rear Power Window LH Circuit Inspection (Rear Power Window Switch LH Operation)
INFOID:0000000004306872
Page 3343 of 4331
OK >> Replace rear power window switch LH. Refer to
EI-34," Removal and Installation " .
NG >> Repair or replace harness.
Rear Power Window RH Circuit Inspection (R ear Power Window Switch RH Operation)
INFOID:0000000004306873OK >> Replace rear power window switch RH. Refer to
EI-34," Removal and Installation " .
NG >> Repair or replace harness.
Rear Power Window Motor LH Circuit Inspection INFOID:0000000004306874OK >> Replace rear power window motor LH. Refer to
GW-48 .
NG >> GO TO 2.
Page 3344 of 4331
GW
N
O P
1. Turn ignition switch OFF.
2. Disconnect rear power window switch LH.
3. Check continuity between rear power window switch LH connec-
tor D203 (A) terminals 4, 5 and rear power window motor LH
connector D204 (B) terminals 1, 2.
4. Check continuity between rear power window switch LH connec- tor D203 (A) terminals 4, 5 and ground.
OK or NG OK >> GO TO 3.
NG >> Repair or replace harness. OK >> GO TO 4.
NG >> Replace rear power window switch LH. Refer to EI-34, " Removal and Installation " .
OK >> Replace main power window and door lock/unlock switch. Refer to
EI-34, " Removal and Installa-
tion " .
4 - 1 : Continuity should exist.
5 - 2 : Continuity should exist.
4 - Ground : Continuity should not exist.
5 - Ground : Continuity should not exist.