Page 393 of 4462
DISASSEMBLY AT-309
D E
F
G H
I
J
K L
M A
B
AT
Revision: 2006 December 2006 FX35/FX45
64. Remove manual shaft from transmission case.
65. Remove manual shaft oil seals using a flat-bladed screwdriver. CAUTION:
Be careful not to scratch transmission case.
66. Remove detent spring and spacer from transmission case.
67. Using pair of snap ring pliers, remove snap ring from transmis- sion case.
68. Remove servo assembly (with return spring) from transmission case.
SCIA5716E
SCIA2331E
SCIA5248E
SCIA2333E
SCIA5679E
Page 394 of 4462
AT-310
DISASSEMBLY
Revision: 2006 December 2006 FX35/FX45
69. Remove return spring from servo assembly.
70. Remove O-rings from servo assembly.
71. Remove needle bearing from rear extension (2WD models) or adapter case (AWD models).
72. Remove parking actuator support from rear extension (2WD models) or adapter case (AWD models).
73. Remove parking pawl (with return spring) and pawl shaft from rear extension (2WD models) or adapter case (AWD models).
SCIA5717E
SCIA5719E
SCIA5221E
SCIA3423E
SCIA3424E
Page 395 of 4462
DISASSEMBLY AT-311
D E
F
G H
I
J
K L
M A
B
AT
Revision: 2006 December 2006 FX35/FX45
74. Remove return spring from parking pawl.
VQ35DE models
VK45DE models
–Return spring (1)
–Parking pawl (2)
75. Remove rear oil seal from rear extension (2WD models) or adapter case (AWD models).
CAUTION:
Be careful not to scratch rear extension (2WD models) or
adapter case (AWD models).
SCIA2445E
SCIA6180J
SCIA5481E
Page 396 of 4462
AT-312
REPAIR FOR COMPONENT PARTS
Revision: 2006 December 2006 FX35/FX45
REPAIR FOR COMPONENT PARTSPFP:00000
Oil PumpNCS001IQ
COMPONENTS
DISASSEMBLY
1. Remove oil pump housing from oil pump cover.
2. Remove oil pump housing oil seal using a flat-bladed screw- driver.
CAUTION:
Be careful not to scratch oil pump housing.
1. O-ring 2. Oil pump cover 3. O-ring
4. Oil pump housing 5. Oil pump housing oil seal
SCIA5227E
SCIA5228E
SCIA2840E
Page 397 of 4462
REPAIR FOR COMPONENT PARTS AT-313
D E
F
G H
I
J
K L
M A
B
AT
Revision: 2006 December 2006 FX35/FX45
3. Remove O-ring from oil pump housing.
4. Remove O-ring from oil pump cover.
ASSEMBLY
1. Install O-ring to oil pump cover. CAUTION:
Do not reuse O-ring.
Apply ATF to O-ring.
2. Install O-ring to oil pump housing. CAUTION:
Do not reuse O-ring.
Apply ATF to O-ring.
SCIA2841E
SCIA5230E
SCIA5230E
SCIA2841E
Page 398 of 4462
AT-314
REPAIR FOR COMPONENT PARTS
Revision: 2006 December 2006 FX35/FX45
3. Using the drift, install oil pump housing oil seal to the oil pump housing until it is flush.
CAUTION:
Do not reuse oil pump housing oil seal.
Apply ATF to oil pump housing oil seal.
4. Install oil pump housing to oil pump cover.
5. Tighten bolts to the specified torque in numerical order shown in the figure after temporarily tightening them. Refer to AT- 3 1 2 ,
"COMPONENTS" .
SCIA5313E
SCIA6388E
Page 399 of 4462
REPAIR FOR COMPONENT PARTS AT-315
D E
F
G H
I
J
K L
M A
B
AT
Revision: 2006 December 2006 FX35/FX45
Front Sun Gear, 3rd One-way ClutchNCS001IR
COMPONENTS
DISASSEMBLY
1. Using a flat-bladed screwdriver, remove snap ring from front sun gear.
2. Remove 3rd one-way clutch from front sun gear.
1. Front sun gear 2. 3rd one-way clutch 3. Snap ring
SCIA3114E
SCIA3110E
S C I A 3 111 E
Page 400 of 4462
AT-316
REPAIR FOR COMPONENT PARTS
Revision: 2006 December 2006 FX35/FX45
INSPECTION
3rd One-way Clutch
Check frictional surface for wear or damage.
CAUTION:
If necessary, replace the 3rd one-way clutch.
Front Sun Gear Snap Ring
Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the snap ring.
Front Sun Gear
Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the front sun gear.
ASSEMBLY
1. Install 3rd one-way clutch in front sun gear.
CAUTION:
Apply ATF to 3rd one-way clutch.
2. Using a flat-bladed screwdriver, install snap ring in front sun gear.
3. Check operation of 3rd one-way clutch.
a. Hold oil pump assembly and turn front sun gear.
b. Check 3rd one-way clutch for correct locking and unlocking directions.
CAUTION:
If not as shown in the figure, check installation direction of
3rd one-way clutch.
S C I A 3 111 E
SCIA3110E
SCIA3131E