Page 2001 of 3229
31.
32.
33.
Unclip the windscreen heat er el ect ri cal connector fromt he plenum s i de ext ensi on panel and remove the panel.34.
Page 2002 of 3229
35.
36. NOTE: LHD il lus trati on s hown, RHD is s imil ar.36.
Releas e t he engi ne compartment harnes s from cl ips ecuring i t to the vehicle bul khead.37.
Page 2003 of 3229
38. NOTE: RHD i llus t rati on s hown, LHD is s imil ar.38.
39.
40.
Page 2004 of 3229
41. NOTE: RHD i llus t rati on s hown, LHD is s imil ar.41.
42. NOTE: RHD i llus t rati on s hown, LHD is s imil ar.
RH si de front: Releas e t he ABS s ens or lead anddis connect the el ect ri cal connect or.
42.
43. NOTE: RH i llus t rati on s hown, LH is s imil ar
Releas e t he LH s ide repeat er from t he vehi cl e body anddis connect the el ect ri cal connect or.
43.
Page 2005 of 3229
44. NOTE: RHD i llus t rati on s hown, LHD is s imil ar.44.
45. NOTE: RHD i llus t rati on s hown, LHD is s imil ar.
Unclip the harnes s t ray from t he vehi cl e bulkhead androut e t he RHS of t he harness around the brake pipesi nt o t he LHS of t he engi ne bay.
45.
Page 2006 of 3229
46. NOTE: RHD i llus t rati on s hown, LHD is s imil ar.46.
47. NOTE: RHD i llus t rati on s hown, LHD is s imil ar.47.
48. NOTE: RHD i llus t rati on s hown, LHD is s imil ar.48.
49. NOTE: RHD i llus t rati on s hown, LHD is s imil ar.49.
Page 2007 of 3229
50. NOTE: LHD il lus trati on s hown, RHD is s imil ar.50.
51. NOTE: RHD i llus t rati on s hown, LHD is s imil ar.51.
Page 2008 of 3229
52.
NOTE: RHD i llus t rati on s hown, LHD is s imil ar.
W it h ass i st ance, rel ease the harnes s .
52.
53. NOTE: W i th as s is t ance remove the component .
Remove t he engi ne compartment harnes s .
53.
Installation Place harnes s t o vehi cl e plenum, feed connect ors into ins ide of
vehicle and i nst all grommet. Us e as s is tance ins ide vehicl e to pul l
connectors t hrough.
1.
Secure harnes s t ray cli ps and secure rubber grommet t o vehi cl e
body.
2.
Inst all and s ecure fus ebox to body.
T orque: 10 Nm 3.
Inst all t he engi ne mounti ng plate.
T orque: M8 24 Nm M12
80 Nm 4.
Secure t he engi ne harnes s to the fus ebox.
5.
Connect t he two electrical connect ors t o t he BJB.
6.
Inst all and s ecure t he bat t ery l ead to t he fusebox and ins t al l the
s mall bat tery lead cover.
T orque: 10 Nm 7.