Page 2457 of 3229
Publi s hed: 11-May-2011
Safety Belt System - Front Safety Belt Retractor
Removal and Inst all ati on
Removal
• NOTE: Removal s t eps in t his procedure may cont ain i nst all ati on det ail s.
Make t he SRS s ys t em s afe.
Refer t o: Supplement al Res t raint Sys tem (SRS) Depowering and
Repowering (501-20, General Procedures ).
1.
Remove t he B-pi llar upper trim panel .
Refer t o: B-Pil lar Upper Trim Panel (501-05 Interior Tri m and
Ornament ati on, Removal and Ins tal lat ion).
2. 3. W ARNING: Make sure t hat a new bolt i s
i ns t alled.
T orque: 40 Nm 3.
Installation To i nst all , revers e t he removal procedure.
1.
Page 2458 of 3229
Publi s hed: 11-May-2011
Safety Belt System - Rear Safety Belt Retractor
Removal and Inst all ati on
Removal
Remove t he rear quart er t ri m panel.
Refer t o: Rear Quarter Tri m Panel (501-05 Int erior Tri m and
Ornament ati on, Removal and Ins tal lat ion).
1.
Remove t he C-pi llar upper trim panel .
Refer t o: C-Pil lar Tri m Panel (501-05 Int erior Trim and
Ornament ati on, Removal and Ins tal lat ion).
2. T orque:
40 Nm 3.
Installation To i nst all , revers e t he removal procedure.
1.
Page 2459 of 3229
Publi s hed: 11-May-2011
Safety Belt System - Rear Center Safety Belt Retractor
Removal and Inst all ati on
Removal
• NOTE: This procedure invol ves the removal and i nst all at ion of bot h rear s eat backres ts and the LH rear s eat backrestcover and pad as sembl y. Al l not es and caut ions mus t be foll owed st ri ctl y to avoi d any chance of NVH or fai lure of the rears eat backres ts .
1.
2.
Page 2460 of 3229
Releas e t he RH rear s eat backres t outer pivot pinbus hi ng.3.
Us ing a s crewdriver, releas e t he out er pivot pin bus hingl ocking arm.4.
5. CAUTION: The l eft-hand rear s eat backres ti nner pivot pin has radial grooves . W hen removing t heRH backres t from t he LH backres t take care not t odamage t he RH backrest i nner pi vot bus hing.
Releas e t he RH rear s eat backres t outer pivotpin bus hing from t he mounti ng bracket .Releas e t he RH rear s eat backres t from the LHrear s eat backres t .
5.
Page 2461 of 3229
Remove and dis card t he RH rear seat backrest out erpivot pin bus hing.6.
If ins tal led, releas e t he armres t.Remove and dis card t he armres t pivot bus hings pri ng cl ips .
7.
Sli de t he armrest upwards .Sli de t he armrest out wards .
8.
Page 2462 of 3229
Remove t he armrest backing plat e.Remove and dis card t he 4 fir t ree cl ips .
9.
10. CAUTION: Make s ure t hat a webbing ret ainer isins t al led at l eas t 200 mm t owards t he rear cent er s afetybelt ret ract or from t he webbi ng s top.
Ins t all the safety belt webbi ng ret ai ner.
10.
Remove t he rear cent er safety bel t lower anchor nut .11.
12.13.
Page 2463 of 3229
Releas e t he LH rear s eat backres t outer pivot pinbus hi ng.14.
Us ing a s crewdriver, releas e t he out er pivot pin bus hingl ocking arm.15.
16. CAUTION: The left-hand rear s eat backres ti nner pivot pin has radial grooves . Take care not t odamage t he cent er hi nge pivot bus hing.
Releas e t he LH rear s eat backres t outer pivotpin bus hing from t he mounti ng bracket .Carefully sl ide t he LH rear seat backres t i nnerpivot pin out of t he cent er hinge pivot bushi ng.
16.
Page 2464 of 3229
Remove and dis card t he LH rear seat backres t out erpivot pin bus hing.17.
18.
Remove t he cent er safet y belt t rim panel.19.