Page 697 of 3229
Publi s hed: 11-May-2011
Engine - I6 3.2L Petrol - Oil Filter Element
Removal and Inst all ati on
Removal
Releas e t he PAS fl uid reservoi r from t he bracket and ti e as ide.
1. Loosen t he element cover 4 compl ete t urns t o al low
engine oil t o drai n from the fil ter cover.
2. 3.
Installation Inst all t he oil fi lt er element.
1.
Inst all t he engi ne oil filt er.
T orque: 25 Nm 2.
Secure t he res ervoir.
3.
Check and top-up the engine oi l.
4.
Page 698 of 3229
Publi s hed: 11-May-2011
Engine - I6 3.2L Petrol - Engine Upper Support Insulator
Removal and Inst all ati on
Removal
• NOTE: Removal s t eps in t his procedure may cont ain i nst all ati on det ail s. T orque:
10 Nm 1.
T orque:
110 Nm 2.
Installation To i nst all , revers e t he removal procedure.
1.
Page 699 of 3229
Publi s hed: 11-May-2011
Engine - I6 3.2L Petrol - Engine Lower Support Insulator
Removal and Inst all ati on
Removal
• NOTE: Removal s t eps in t his procedure may cont ain i nst all ati on det ail s. All vehicles
1. W ARNING: Make sure t o s upport the vehicle wit h axle
s tands .
Rais e and s upport t he vehi cl e.
1.
Remove t he engi ne undershi eld.
Refer t o: Engi ne Unders hi eld (501-02 Front End Body Panel s ,
Removal and Ins tall ati on).
2. 3. CAUTION: Make s ure that thes e component s
are ins tal led t o t he noted removal pos it ion.
Remove t he lower s upport ins ul ator.
T orque: 110 Nm 3.
Vehicles with petrol engine 4.
NOTE: Do not dis ass embl e further if t he component
i s removed for acces s onl y.
Remove t he heat s hiel d.
T orque: 10 Nm 4.
All vehicles
Page 700 of 3229
Remove t he engi ne mount li nk bracket s.
T orque: 110 Nm 5.
Installation To i nst all , revers e t he removal procedure.
1.
Page 701 of 3229

Publi s hed: 11-May-2011
Engine - I6 3.2L Petrol - Engine Mount LH
Removal and Inst all ati on
General Equipment
Trans mi ss i on jack
Removal
• NOTE: Removal s t eps in t his procedure may cont ain i nst all ati on det ail s.
1. W ARNING: Make sure t o s upport the vehicle wit h axles tands .
Rais e and s upport t he vehi cl e.
1.
Remove t he engi ne undershi eld.
Refer t o: Engi ne Unders hi eld (501-02 Front End Body Panel s ,Removal and Ins tall ati on).
2.
Support the trans mi s si on.
General Equi pment: Trans mi ss i on jack
3.
Remove t he air cleaner as s embly.
Refer t o: Air Cleaner (303-12A Intake Ai r Dis tribut ion and Fil tering -I6 3.2L Pet rol, Removal and Ins t al lat ion).
4.
Remove t he bat t ery t ray.
Refer t o: Bat t ery Tray (414-01 Bat tery, Mount ing and Cables ,Removal and Ins tall ati on).
5.
6. W ARNING: Make sure t hat new nut s arei ns t alled.
• NOTE: Vehicles wi th aut omat ic t rans mis s ion have abreat her pi pe att ached t o t he mounti ng.
Remove t he bracket .
T orque:M12 80 NmM8 25 Nm
6.
Remove t he engi ne mount LH.
T orque: 175 Nm
7.Installation
To i nst all , revers e t he removal procedure.1.
Page 702 of 3229
Publi s hed: 11-May-2011
Engine - I6 3.2L Petrol - Engine Mount RH
Removal and Inst all ati on
Special T ool(s)
303-1254Support , Engine
Removal
• NOTE: Removal s t eps in t his procedure may cont ain i nst all ati on det ail s.
1. W ARNING: Make sure t o s upport the vehicle wit h axles tands .
Rais e and s upport t he vehi cl e.
1.
Remove t he engi ne undershi eld.
Refer t o: Engi ne Unders hi eld (501-02 Front End Body Panel s ,Removal and Ins tall ati on).
2.
Remove t he RH front wheel and t ire.
Refer t o: W heel and Ti re (204-04 W heel s and Tires, Removal andInst all at ion).
3.
Remove t he fender spl as h shi el d extens ion panel.4.
Page 703 of 3229
Support the engi ne.
Speci al Tool (s ): 303-1254 5.
Remove t he engi ne cover.
Refer t o: Engi ne Cover - I6 3.2L Pet rol (501-05 Int eri or Trim and
Ornament ati on, Removal and Ins tal lat ion).
6.
Remove t he s tabil izer bar.
Refer t o: Engi ne Upper Support Ins ulat or (303-01A Engine - I6 3.2L
Petrol, Removal and Ins tall ati on).
7. T orque:
M10 45 Nm M12
80 Nm 8.
T orque:
80 Nm 9.
Installation To i nst all , revers e t he removal procedure.
1.
Page 704 of 3229
Publi s hed: 11-May-2011
Engine - I6 3.2L Petrol - Timing Cover
Removal and Inst all ati on
Special T ool(s)
303-1227Inst all er, Auxili ary Drive Seal
303-1228Hol der, Generator Pulley
Removal
1. W ARNING: Make sure t o s upport the vehicle wit h axles tands .
Rais e and s upport t he vehi cl e.
1.
Remove t he cover and dis connect the bat tery ground cabl e.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -General Informat ion, Specificati ons).
2.
Drai n t he cool ant .
Refer t o: Cool ing Sys tem Drai ni ng, Fi lli ng and Bleeding (303-03AEngine Cooli ng - I6 3.2L Petrol, General Procedures).
3.
Remove t he acces sory dri ve pul ley.
Refer t o: Acces sory Dri ve Pulley (303-05A Acces s ory Drive - I6 3.2LPetrol, Removal and Ins tall ati on).
4.