Page 929 of 3229
Publi s hed: 11-May-2011
Engine Cooling - I6 3.2L Petrol - Cooling Fan
Removal and Inst all ati on
Removal
1. W ARNING: Make sure t o s upport the vehicle wit h axle
s tands .
Rais e and s upport t he vehi cl e.
1.
2. CAUTION: After s wit chi ng off t he ignit ion, wait for 2 mi nutes
before dis connecti ng the bat tery. Fail ure to wai t for 2 minutes will
damage t he navi gat ion computer.
Di sconnect t he bat t ery ground cable.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -
General Informat ion, Specificati ons).
2.
Remove t he int ake mani fol d.
Refer t o: Int ake Mani fol d (303-01A Engi ne - I6 3.2L Petrol, Removal
and Inst all at ion).
3. Releas e t he A/C and power s t eering pi pes .
4.
Remove t he A/C li ne support bracket.
5. Remove t he A/C compress or, l ower support bracket.
6.
Page 930 of 3229
Remove t he A/C compress or, upper s upport bracket.
7. Us ing s uit able t ools , rel eas e t he acces s ory drive belt
t ens i on.
8. Releas e t he A/C compress or and posi ti on as ide.
9.
Page 931 of 3229
Di sconnect t he cool ing fan cont rol electrical connect or.
10.
Releas e t he cool ing fan wiring harnes s .
11. Remove t he cool ing fan ass embly.
12.
Installation Inst all t he cool ing fan ass embly.
1.
Inst all t he A/C compress or.
T orque: 25 Nm 2.
Inst all t he A/C compress or, upper s upport bracket.
T orque: M10 45 Nm M8
25 Nm M6
10 Nm 3.
Inst all t he acces sory dri ve bel t.
4.
Inst all t he A/C compress or, l ower support bracket.
T orque: 25 Nm 5.
Inst all t he A/C li ne support bracket.
T orque: 10 Nm 6.
Secure t he A/C pipes.
7.
Secure t he cool ing fan harness .
8.
Page 932 of 3229
Connect t he cool ing fan electrical connect or.
9.
Inst all t he int ake mani fol d.
Refer t o: Int ake Mani fol d (303-01A Engi ne - I6 3.2L Petrol, Removal
and Inst all at ion).
10.
Connect t he batt ery ground cable.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -
General Informat ion, Specificati ons).
11.
Page 933 of 3229
Publi s hed: 11-May-2011
Engine Cooling - I6 3.2L Petrol - Cooling Fan Module
Removal and Inst all ati on
Removal
• NOTE: Petrol ill ust rat ion s hown, dies el s i mil ar.
Remove t he cover and dis connect the bat tery ground cabl e.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -
General Informat ion, Specificati ons).
1.
Remove t he cool ing fan module. T orque:
6 Nm 2.
Installation To i nst all , revers e t he removal procedure.
1.
Page 934 of 3229
Publi s hed: 11-May-2011
Engine Cooling - I6 3.2L Petrol - Coolant Expansion Tank
Removal and Inst all ati on
Removal W ARNING: W hen rel eas i ng the cooli ng s ys t em pres s ure, cover t he cool ant expansi on tan
k cap wi th a t hi ck cl oth.T orque:
10 Nm 1.
Clamp the relevant hos e, t o mi ni mis e coolant los s .
2. 3. CAUTION: Be prepared to col lect escaping
cool ant.
3.
Page 935 of 3229
4. NOTE: Do not di s as s emble furt her if t he componentis removed for acces s only.4.
Installation
To i nst all , revers e t he removal procedure.1.
Top-up t he cool ant.2.
Page 936 of 3229
Publi s hed: 11-May-2011
Engine Cooling - I6 3.2L Petrol - Engine Coolant Level Switch
Removal and Inst all ati on
Removal
• NOTE: Removal s t eps in t his procedure may cont ain i nst all ati on det ail s. T orque:
10 Nm 1.
2.
Installation To i nst all , revers e t he removal procedure.
1.