2006 LAND ROVER FRELANDER 2 Repair Manual

Page 881 of 3229

LAND ROVER FRELANDER 2 2006  Repair Manual Publi s hed: 11-May-2011
Engine - TD4 2.2L Diesel - Oil Pan Extension
Removal  and Inst all ati on
Removal
1. W ARNING: Make sure t o s upport the vehicle wit h axles tands .
Rais e and s upport  t he

Page 882 of 3229

LAND ROVER FRELANDER 2 2006  Repair Manual Di sconnect  t he oil level sens or elect rical  s ens or.5.
Releas e t he crankcas e vent  oi l separat or drain tube.6.
Remove t he 4 t rans mis s ion bolt s .7.

Page 883 of 3229

LAND ROVER FRELANDER 2 2006  Repair Manual Remove t he oil pan extens ion panel .
8. Remove t he oil level sens or.
9.
Remove t he gas ket.
10.
Installation
Inst all  t he oil level sens or.
T orque:  8 Nm 1.
For seal ant  s peci fi cat ion, r

Page 884 of 3229

LAND ROVER FRELANDER 2 2006  Repair Manual Stage 1:
Stage 2: Apply a bead of s ealant, 3 mm diamet er, to the area
i ndi cat ed.
3.
Inst all  t he oil pan extens ion panel .
T orque: 10 Nm 16 Nm4.
Inst all  t he transmis si on ret aining bol t

Page 885 of 3229

LAND ROVER FRELANDER 2 2006  Repair Manual Publi s hed: 11-May-2011
Engine - TD4 2.2L Diesel - Flywheel
Removal  and Inst all ati on
Removal
Di sconnect  t he bat t ery ground cable.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys

Page 886 of 3229

LAND ROVER FRELANDER 2 2006  Repair Manual Stage 1:
Stage 2: 1. 
CAUTIONS:  Ti ght en t he bol ts  in t he s equence s hown.
 Make s ure that  new bolt s  are ins t al led.
T orque: 33 Nm 34°1.
Inst all  t he cl utch di sc and press ure plate

Page 887 of 3229

LAND ROVER FRELANDER 2 2006  Repair Manual Stage 1:
Stage 2: Publi s hed: 11-May-2011
Engine - TD4 2.2L Diesel - Flexplate
Removal  and Inst all ati on
Special T ool(s) 303-1272
Locki ng Tool , Flywheel
Removal
• NOTE: The flywheel  i llus t

Page 888 of 3229

LAND ROVER FRELANDER 2 2006  Repair Manual Publi s hed: 11-May-2011
Engine - TD4 2.2L Diesel - Balance Shaft Assembly
Removal  and Inst all ati on
Special T ool(s)
303-1270Ti ming Pi n, Cranks haft
303-1328Ti ming Pl at e, Balance Shafts
303-1