2006 LAND ROVER FRELANDER 2 Repair Manual

Page 2833 of 3229

LAND ROVER FRELANDER 2 2006  Repair Manual 113
Starting the engine
R
Starting the engineGENERAL INFORMATION
Docking the remote
Before the engine can be  started, the remote  
control will need to be docked.
Start/Stop button
The start/stop but

Page 2834 of 3229

LAND ROVER FRELANDER 2 2006  Repair Manual Starting the engine
114
L
STARTING A PETROL ENGINE
Starting
1. Insert the remote control into the docking  
port and press to latch. 
2.  Press the brake pedal.  3. 
With the brake peda l depressed br

Page 2835 of 3229

LAND ROVER FRELANDER 2 2006  Repair Manual 115
Starting the engine
R
STARTING A DIESEL ENGINE
Manual transmission
Note:  Do not press the accelerator pedal when  
starting the engine. 
1.  Insert the remote control into the docking  
port and

Page 2836 of 3229

LAND ROVER FRELANDER 2 2006  Repair Manual Starting the engine
116
L
Stopping the engine
Before stopping the engine, ensure that the  
vehicle is parked safely with the park brake 
applied. 
1.  Select  P (Park) and press the Start/Stop  
butt

Page 2837 of 3229

LAND ROVER FRELANDER 2 2006  Repair Manual 117
Starting the engine
R
Regeneration procedure 
If   DPF FULL  along with the handbook symbol  
appears in the message centre, carry out the  
following procedure. 
Note:   At all times during this

Page 2838 of 3229

LAND ROVER FRELANDER 2 2006  Repair Manual Transmission
118
L
TransmissionMANUAL TRANSMISSION
The gear lever is spring loaded, and when in  
neutral sits between third and forth gear 
positions. Extra pressure will be required to  
move across

Page 2839 of 3229

LAND ROVER FRELANDER 2 2006  Repair Manual 119
Transmission
R
Automatic mode
To select Drive (D) when the vehicle is  
stationary :- 
1.  Apply the footbrake. 
2.  Press the gear selector release button. 
3.  Move the gear selector to Drive (D

Page 2840 of 3229

LAND ROVER FRELANDER 2 2006  Repair Manual Transmission
120
L
Sport mode and CommandShift™
1. To select sport mode, move the selector  
lever from   D to  SPORT . 
2.  To use CommandShift, move the selector  
lever forward to move   up a gea