Page 1417 of 3229
Publi s hed: 11-May-2011
Clutch Controls - Clutch Controls
Diagnosi s and Tes ti ng
Principles of Operation
For addit ional informat ion.REFER to: Manual Transaxle and Clutch (308-00 Manual Transmis si on/Trans axl e and Cl ut ch - General Informat ion,Diagnosi s and Tes ti ng).
Page 1418 of 3229

Publi s hed: 11-May-2011
Clutch Controls - Clutch Slave Cylinder
Removal and Inst all ati on
Removal
• NOTE: The clut ch sl ave cyli nder and releas e bearing are a combined as s embly and ca nnot be servi ced separat ely.
Di sconnect t he bat t ery ground cable.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -
General Informat ion, Specificati ons).
1.
2. W ARNING: Make sure t o s upport the vehicle wit h axle
s tands .
Rais e and s upport t he vehi cl e.
2.
Remove t he transmis si on as sembl y.
Refer t o: Transmis s ion (308-03 Manual Trans mi s si on/Trans axl e,
Removal).
3. 4. CAUTION: If brake fl ui d i s s pi lt on the paint work,
the affect ed area mus t be i mmediat ely was hed down wit h
col d wat er.
T orque: 11 Nm 4.
Installation To i nst all , revers e t he removal procedure.
1.
Bleed t he clut ch sys t em.
Refer t o: Clutch Sys tem Bleeding (308-00 Manual
Trans mi ss ion/Transaxle and Clut ch - General Informati on, General
Procedures ).
2.
Inst all t he transmis si on.
Refer t o: Transmis s ion (308-03 Manual Trans mi s si on/Trans axl e,
Removal).
3.
Connect t he batt ery ground cable.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -
General Informat ion, Specificati ons).
4.
Page 1419 of 3229
Publi s hed: 11-May-2011
Clutch Controls - Clutch Master CylinderRHD AWD
Removal and Inst all ati on
Removal
Remove t he cl utch pedal as s embly.
Refer t o: Clutch Pedal - RHD AW D (308-02 Clut ch Cont rol s, Removaland Inst all at ion).
1.
Installation
Inst all t he cl utch pedal as s embly.
Refer t o: Clutch Pedal - RHD AW D (308-02 Clut ch Cont rol s, Removaland Inst all at ion).
1.
Page 1420 of 3229
Publi s hed: 11-May-2011
Clutch Controls - Clutch Master CylinderLHD AWD
Removal and Inst all ati on
Removal
Remove t he cl utch pedal as s embly.
Refer t o: Clutch Pedal - LHD AW D (308-02 Clutch Cont rols , Removaland Inst all at ion).
1.
Installation
Inst all t he cl utch pedal as s embly.
Refer t o: Clutch Pedal - LHD AW D (308-02 Clutch Cont rols , Removaland Inst all at ion).
1.
Page 1421 of 3229
Publi s hed: 11-May-2011
Clutch Controls - Clutch PedalRHD AWD
Removal and Inst all ati on
Removal
Di sconnect t he bat t ery ground cable.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -General Informat ion, Specificati ons).
1.
Remove t he s econdary bulkhead cent er panel.
Refer t o: Secondary Bulkhead Cent er Panel - TD4 2.2L Dies el(501-02 Front End Body Panel s, Removal and Ins tal lati on).
2.
3. CAUTION: Brake flui d wil l damage pai ntfinis hed s urfaces . If s pil led, immedi ately remove t hefluid and cl ean the area wit h wat er.
• NOTE: Pos it ion clot h t o col lect fl uid s pil lage.
3.
4. NOTE: If equiped4.
Remove t he dri ver l ower ai r bag.
Refer t o: Dri ver Lower Air Bag Module (501-20B SupplementalRes traint Sys t em, Removal and Inst all at ion).
5.
Page 1422 of 3229
6. W ARNING: Make sure t hat a new bolt i s
i ns t alled.
T orque: 25 Nm 6.
7.
8.
Page 1423 of 3229
Page 1424 of 3229
T orque:
24 Nm 12.
13. CAUTION: "Make sure t hat a new component
i s ins tal led. "
• NOTE: Do not di sas s emble furt her i f the component is
removed for acces s onl y.
13.