Page 473 of 3342
2. Air Intake System
B2M1166A
1Gasket
2Throttle position sensor
3Throttle body
4Clamp
5Air intake duct
6By-pass hose
7Air intake chamber
8Stay A
9Stay B (AT model)
10Stay C (MT model)
11Stay D (MT model)
12Spacer
13Bush
Tightening torque: N⋅m (kg-m, ft-lb)
T1: 2.2±0.2 (0.22±0.02, 1.6±0.1)
T2: 4.9±0.5 (0.5±0.05, 3.6±0.4)
T3: 22±2 (2.2±0.2, 15.9±1.4)
5
2-7COMPONENT PARTS
2. Air Intake System
Page 474 of 3342
3. Air Cleaner
B2M1245A
1Mass air flow sensor bracket
2Mass air flow sensor ASSY
3Air cleaner upper cover
4Air cleaner element
5Spacer
6Bush
7Clip
8Air cleaner case
9Cushion rubber
10Air intake duct
11Resonator chamber ASSY
12Clip
Tightening torque: N⋅m (kg-m, ft-lb)
T1: 7.4±2.0 (0.75±0.2, 5.4±1.4)
T2: 33±10 (3.4±1.0, 25±7)
6
2-7COMPONENT PARTS
3. Air Cleaner
Page 475 of 3342
B2M1225A
1. Air Cleaner and Air Intake Duct
A: REMOVAL AND INSTALLATION
1) Disconnect connector from mass air flow sensor.
B2M1226A
2) Loosen clamp which connects air intake duct to air
intake chamber.
3) Remove two clips of air cleaner upper cover.
4) Disconnect blow-by hose from air intake duct.
B2M1227
5) Remove air intake duct and air cleaner upper cover as
a unit.
6) Remove air cleaner element.
B2M1232A
7) Remove air cleaner lower case.
B2M1213
8) Installation is in the reverse order of removal.
CAUTION:
Before installing air cleaner upper cover, align holes
with protruding portions of air cleaner lower case, then
secure upper cover to lower case.
7
2-7SERVICE PROCEDURE
1. Air Cleaner and Air Intake Duct
Page 476 of 3342
B2M1214A
2. Mass Air Flow Sensor
A: REMOVAL AND INSTALLATION
1) Loosen clamps which connect air intake duct to air
intake chamber and mass air flow sensor.
2) Disconnect blow-by hose from air intake duct.
3) Remove air intake duct.
B2M1246A
4) Disconnect connector from mass air flow sensor.
G2M0390
5) Remove two clips, then remove air cleaner upper cover.
G2M0393
6) Remove mass air flow sensor from air cleaner upper
cover.
7) Installation is in the reverse order of removal.
Tightening torque:
7.4±2.0 N⋅m (0.75±0.2 kg-m, 5.4±1.4 ft-lb)
CAUTION:
Before installing air cleaner upper cover, align holes
with protruding portions of air cleaner lower case, then
secure upper cover to lower case.
8
2-7SERVICE PROCEDURE
2. Mass Air Flow Sensor
Page 477 of 3342
B2M1214A
3. Throttle Body
A: REMOVAL AND INSTALLATION
1) Loosen clamps which connect air intake duct to air
intake chamber and mass air flow sensor.
2) Disconnect blow-by hose from air intake duct.
3) Remove air intake duct.
B2M1218
4) Loosen clamp which connects air intake chamber to
throttle body.
5) Disconnect air hoses, and remove air intake chamber.
G2M0280
6) Disconnect accelerator cable1.
7) Disconnect cruise control cable
2. (With cruise control
model)
B2M1247
8) Disconnect connector from throttle position sensor.
B2M1248
9) Disconnect engine coolant hoses from throttle body.
9
2-7SERVICE PROCEDURE
3. Throttle Body
Page 478 of 3342
B2M1249
10) Remove bolts which install throttle body to intake
manifold.
11) Installation is in the reverse order of removal.
CAUTION:
Always use a new gasket.
Before installing air cleaner upper cover, align holes
with protruding portions of air cleaner lower case, then
secure upper cover to lower case.
Tightening torque:
Throttle body:
22±2 N⋅m (2.2±0.2 kg-m, 15.9±1.4 ft-lb)
Air intake chamber:
4.9±0.5 N⋅m (0.5±0.05 kg-m, 3.6±0.4 ft-lb)
B2M1225A
4. Intake Manifold
A: REMOVAL
1) Release fuel pressure.
2) Disconnect connector from mass air flow sensor.
B2M1226A
3) Loosen clamp which connects air intake duct to air
intake chamber.
4) Remove two clips of air cleaner upper cover.
5) Disconnect blow-by hose from air intake duct.
B2M1227
6) Remove air intake duct and air cleaner upper cover as
a unit.
7) Remove air cleaner element.
10
2-7SERVICE PROCEDURE
3. Throttle Body - 4. Intake Manifold
Page 479 of 3342
B2M1249
10) Remove bolts which install throttle body to intake
manifold.
11) Installation is in the reverse order of removal.
CAUTION:
Always use a new gasket.
Before installing air cleaner upper cover, align holes
with protruding portions of air cleaner lower case, then
secure upper cover to lower case.
Tightening torque:
Throttle body:
22±2 N⋅m (2.2±0.2 kg-m, 15.9±1.4 ft-lb)
Air intake chamber:
4.9±0.5 N⋅m (0.5±0.05 kg-m, 3.6±0.4 ft-lb)
B2M1225A
4. Intake Manifold
A: REMOVAL
1) Release fuel pressure.
2) Disconnect connector from mass air flow sensor.
B2M1226A
3) Loosen clamp which connects air intake duct to air
intake chamber.
4) Remove two clips of air cleaner upper cover.
5) Disconnect blow-by hose from air intake duct.
B2M1227
6) Remove air intake duct and air cleaner upper cover as
a unit.
7) Remove air cleaner element.
10
2-7SERVICE PROCEDURE
3. Throttle Body - 4. Intake Manifold
Page 480 of 3342
B2M1218
8) Loosen clamp which connects air intake chamber to
throttle body.
9) Disconnect air hoses, and remove air intake chamber.
G2M0280
10) Disconnect accelerator cable1.
11) Disconnect cruise control cable
2. (With cruise control
model)
B2M1231A
12) Disconnect vacuum hoses from pressure sources
switching solenoid valve.
B2M0017
13) Remove power steering pump from bracket.
(1) Remove V-belt cover.
G2M0286
(2) Loosen lock bolt and slider bolt, and remove power
steering pump drive V-belt.
11
2-7SERVICE PROCEDURE
4. Intake Manifold