1997 SUBARU LEGACY Service Repair Manual

Page 2425 of 3342

SUBARU LEGACY 1997  Service Repair Manual OBD0418A
1. CHECK HARNESS AND CONNECTORS BETWEEN
TCM AND DUTY SOLENOID B.
1) Turn ignition switch to OFF.
2) Disconnect connectors from TCM and transmission.
3) Measure resistance of harness connector

Page 2426 of 3342

SUBARU LEGACY 1997  Service Repair Manual OBD0607A
4. CHECK OUTPUT SIGNAL EMITTED FROM TCM.
1) Connect connectors to TCM and transmission.
2) Lift-up the vehicle or set the vehicle on free roller.
CAUTION:
On AWD models, raise all wheels off

Page 2427 of 3342

SUBARU LEGACY 1997  Service Repair Manual OBD0417
(6) Start and warm-up the engine and transmission.
(7) Push the TCS OFF switch to ON. (With TCS mod-
els)
(8) Designate mode using function key.
Function mode: F12
(9) Move selector lever to

Page 2428 of 3342

SUBARU LEGACY 1997  Service Repair Manual C: TROUBLE CODE 13
—SHIFT SOLENOID 3—
DIAGNOSIS:
Output signal circuit of shift solenoid 3 is open or shorted.
TROUBLE SYMPTOM:
Ineffective engine brake with shift lever in“3”
1. Check harness

Page 2429 of 3342

SUBARU LEGACY 1997  Service Repair Manual OBD0455A
4) Measure resistance of harness connector between
TCM and body to make sure that circuit does not short.
Connector & terminal / Specified resistance:
(B55) No. 15—Body/1MΩ, or more
(B55)

Page 2430 of 3342

SUBARU LEGACY 1997  Service Repair Manual D: TROUBLE CODE 14
—SHIFT SOLENOID 2—
DIAGNOSIS:
Output signal circuit of shift solenoid 2 is open or shorted.
TROUBLE SYMPTOM:
No shift
1. Check harness and connectors between TCM
and shift solen

Page 2431 of 3342

SUBARU LEGACY 1997  Service Repair Manual OBD0447A
4) Measure resistance of harness connector between
TCM and body to make sure that circuit does not short.
Connector & terminal / Specified resistance:
(B55) No. 13—Body/1MΩ, or more
(B55)

Page 2432 of 3342

SUBARU LEGACY 1997  Service Repair Manual E: TROUBLE CODE 15
—SHIFT SOLENOID 1—
DIAGNOSIS:
Output signal circuit of shift solenoid 1 is open or shorted.
TROUBLE SYMPTOM:
No shift
1. Check harness and connectors between TCM
and shift solen