1997 SUBARU LEGACY Service Repair Manual

Page 1793 of 3342

SUBARU LEGACY 1997  Service Repair Manual 21. Cruise Control
A: ADJUSTMENT
B6M0356A
CAUTION:
A: Must be adjusted when cable end outer is fixed in place,
so that gap between throttle cam and lever is 10
�1mm
(0.040
�0.04in).
(Must be attached

Page 1794 of 3342

SUBARU LEGACY 1997  Service Repair Manual B6M0154A
B: REMOVAL AND INSTALLATION
1. CRUISE CONTROL MAIN SWITCH
1) Remove screws which secure meter visor.
2) Remove meter visor from instrument panel while dis-
connecting connectors.
3) Remove cr

Page 1795 of 3342

SUBARU LEGACY 1997  Service Repair Manual B6M0358
3) Remove nuts which secure actuator.
4) Remove actuator while disconnecting vacuum hose.
Tightening torque:
7.4±1.5 N⋅m (0.75±0.15 kg-m, 5.4±1.1 ft-lb)
B6M0359A
4. VACUUM PUMP AND VALVES

Page 1796 of 3342

SUBARU LEGACY 1997  Service Repair Manual B6M0683A
3) Remove door lock timer1while disconnecting connec-
tor.
B6M0684A
4) Remove cruise control module1while disconnecting
connector.
5) Installation is in the reverse order of removal.
Tighte

Page 1797 of 3342

SUBARU LEGACY 1997  Service Repair Manual C: DRIVING TESTS
Conduct road tests by selecting a smooth, flat road or use
free rollers as road test simulation.
1. MAIN SWITCH
1) Turn ignition switch ON.
2) Check that indicator light comes on when

Page 1798 of 3342

SUBARU LEGACY 1997  Service Repair Manual B6M0361A
22. Security System
A: REMOVAL AND INSTALLATION
1. STARTER INTERRUPT RELAY
NOTE:
The starter interrupt relay and headlight alarm relay use the
same parts and are mounted parallel to each othe

Page 1799 of 3342

SUBARU LEGACY 1997  Service Repair Manual B6M0364A
4. KEY CYLINDER LOCK/UNLOCK SWITCH AND
TAMPER SWITCH
NOTE:
The key cylinder lock switch, unlock switch and tamper
switch are united in the switch body.
Door Switch
1) Remove door trim panel a

Page 1800 of 3342

SUBARU LEGACY 1997  Service Repair Manual 3) Remove door lock actuator assembly. <Ref. to 5-2
[W2A7].>
4) Installation is in the reverse order of removal.
Rear Gate (WAGON)
1) Remove rear gate trim panel.
2) Disconnect rod from rear gate latc