2007 TOYOTA SIENNA Service Repair Manual

Page 233 of 3000

TOYOTA SIENNA 2007  Service Repair Manual SUPPLEMENTAL RESTRAINT SYSTEM  –  SIDE AIRBAG SENSORRS–475
RS
INSTALLATION
HINT:
• Use the same procedures for the RH side and LH side.
• The procedures listed below are for the LH side.
1. IN

Page 234 of 3000

TOYOTA SIENNA 2007  Service Repair Manual RS–476SUPPLEMENTAL RESTRAINT SYSTEM  –  SIDE AIRBAG SENSOR
RS
10. PERFORM INITIALIZATION
(a) Perform initialization.
HINT:
Some systems need initialization when 
disconnecting the cable from the n

Page 235 of 3000

TOYOTA SIENNA 2007  Service Repair Manual SB–6SEAT BELT  –  FRONT SEAT INNER BELT ASSEMBLY
SB
INSTALLATION
1. REMOVE FRONT SEAT INNER BELT ASSEMBLY
HINT:
• Refer to the instructions for reassembly of the front 
seat assembly (for flat t

Page 236 of 3000

TOYOTA SIENNA 2007  Service Repair Manual THEFT DETERRENT  –  THEFT DETERRENT SYSTEMTD–3
TD
SYSTEM DESCRIPTION
1. OUTLINE OF THEFT DETERRENT SYSTEM
(a) When the theft deterrent system detects that the 
vehicle is being tampered with, the

Page 237 of 3000

TOYOTA SIENNA 2007  Service Repair Manual TD–4THEFT DETERRENT  –  THEFT DETERRENT SYSTEM
TD
(a) Active arming mode
Condition Item
Condition (1)(No key in ignition key cylinder)
1. With all doors and engine hood closed, lock all doors by k

Page 238 of 3000

TOYOTA SIENNA 2007  Service Repair Manual THEFT DETERRENT  –  THEFT DETERRENT SYSTEMTD–5
TD
3. PASSIVE ARMING MODE
HINT:
• Passive arming mode starts the alarm control after 
the key is removed from the ignition key cylinder and 
doors

Page 239 of 3000

TOYOTA SIENNA 2007  Service Repair Manual TD–6THEFT DETERRENT  –  THEFT DETERRENT SYSTEM
TD
(a) Passive arming mode
HINT:
• *1: Disarmed state (1) is the normal disarmed 
state.
• *2: Disarmed state (2) is set from either the 
disarme

Page 240 of 3000

TOYOTA SIENNA 2007  Service Repair Manual THEFT DETERRENT  –  THEFT DETERRENT SYSTEMTD–7
TDHINT:
*1: When any door is opened while all the doors are 
closed during passive arming mode, the entry delay 
time starts. If the switch condition