Page 4313 of 4555
CAN SYSTEM (TYPE 4)
LAN-69
[CAN]
C
D
E
F
G
H
I
J
L
MA
B
LAN
Wiring Diagram — CAN —EKS00LUZ
TKWB0112E
Page 4314 of 4555
LAN-70
[CAN]
CAN SYSTEM (TYPE 4)
TKWB0113E
Page 4315 of 4555
![NISSAN X-TRAIL 2005 Service Repair Manual CAN SYSTEM (TYPE 4)
LAN-71
[CAN]
C
D
E
F
G
H
I
J
L
MA
B
LAN
Work FlowEKS00LV0
1. Print all the data of “SELF-DIAG RESULTS” for “ENGINE”, “ABS” and “ALL MODE AWD/4WD” displayed
on CON NISSAN X-TRAIL 2005 Service Repair Manual CAN SYSTEM (TYPE 4)
LAN-71
[CAN]
C
D
E
F
G
H
I
J
L
MA
B
LAN
Work FlowEKS00LV0
1. Print all the data of “SELF-DIAG RESULTS” for “ENGINE”, “ABS” and “ALL MODE AWD/4WD” displayed
on CON](/manual-img/5/57403/w960_57403-4314.png)
CAN SYSTEM (TYPE 4)
LAN-71
[CAN]
C
D
E
F
G
H
I
J
L
MA
B
LAN
Work FlowEKS00LV0
1. Print all the data of “SELF-DIAG RESULTS” for “ENGINE”, “ABS” and “ALL MODE AWD/4WD” displayed
on CONSULT-II.
2. Print all the data of “CAN DIAG SUPPORT MNTR” for “ENGINE”, “ABS” and “ALL MODE AWD/4WD” dis-
played on CONSULT-II.
3. Attach the printed sheet of “SELF-DIAG RESULTS” and “CAN DIAG SUPPORT MNTR” onto the check
sheet. Refer to LAN-72, "
CHECK SHEET" .
4. Based on the results of “CAN DIAG SUPPORT MNTR”, put a check marks onto the items with “NG” or
“UNKWN” in the check sheet table. Refer to LAN-72, "
CHECK SHEET" .
NOTE:
If a check mark is put on “NG” on “INITIAL DIAG (Initial diagnosis)”, replace the control unit.
The “CAN DIAG SUPPORT MNTR” items, which are not in check sheet table, are not related to diag-
nostic procedure on service manual.
So it is not necessary to check the status of the “CAN DIAG SUPPORT MNTR” items not in check
sheet table.
5. According to the check sheet results (example), start inspection. Refer to LAN-73, "
CHECK SHEET
RESULTS (EXAMPLE)" .
PKIA8260E
PKIA8343E
Page 4316 of 4555
LAN-72
[CAN]
CAN SYSTEM (TYPE 4)
CHECK SHEET
NOTE:
If a check mark is put on “NG” on “INITIAL DIAG (Initial diagnosis)”, replace the control unit.
PKIB9064E
Page 4317 of 4555
CAN SYSTEM (TYPE 4)
LAN-73
[CAN]
C
D
E
F
G
H
I
J
L
MA
B
LAN
CHECK SHEET RESULTS (EXAMPLE)
NOTE:
If a check mark is put on “NG” on “INITIAL DIAG (Initial diagnosis)”, replace the control unit.
Case 1
Check harness between ESP/TCS/ABS control unit and 4WD control unit. Refer to LAN-79, "Inspection
Between ESP/TCS/ABS Control Unit and 4WD Control Unit Circuit" .
PKIB9065E
PKIA9636E
Page 4318 of 4555
LAN-74
[CAN]
CAN SYSTEM (TYPE 4)
Case 2
Check ECM circuit. Refer to LAN-80, "ECM Circuit Inspection" .
PKIB9066E
PKIA9637E
Page 4319 of 4555
CAN SYSTEM (TYPE 4)
LAN-75
[CAN]
C
D
E
F
G
H
I
J
L
MA
B
LAN
Case 3
Check ESP/TCS/ABS control unit circuit. Refer to LAN-81, "ESP/TCS/ABS Control Unit Circuit Inspection" .
PKIB9067E
PKIA9638E
Page 4320 of 4555
LAN-76
[CAN]
CAN SYSTEM (TYPE 4)
Case 4
Check steering angle sensor circuit. Refer to LAN-81, "Steering Angle Sensor Circuit Inspection" .
PKIB9068E
PKIA9639E