Page 2337 of 4555
![NISSAN X-TRAIL 2005 Service Repair Manual TROUBLE DIAGNOSIS — BASIC INSPECTION
AT-73
[EURO-OBD]
D
E
F
G
H
I
J
K
L
MA
B
AT
4. CHECK VEHICLE MOVE
1. Apply parking brake.
2. Start engine.
3. Move selector lever to “N” position.
4. Releas NISSAN X-TRAIL 2005 Service Repair Manual TROUBLE DIAGNOSIS — BASIC INSPECTION
AT-73
[EURO-OBD]
D
E
F
G
H
I
J
K
L
MA
B
AT
4. CHECK VEHICLE MOVE
1. Apply parking brake.
2. Start engine.
3. Move selector lever to “N” position.
4. Releas](/manual-img/5/57403/w960_57403-2336.png)
TROUBLE DIAGNOSIS — BASIC INSPECTION
AT-73
[EURO-OBD]
D
E
F
G
H
I
J
K
L
MA
B
AT
4. CHECK VEHICLE MOVE
1. Apply parking brake.
2. Start engine.
3. Move selector lever to “N” position.
4. Release parking brake.
Does vehicle move forward or backward?
YES >>Mark the box on the “DIAGNOSTIC WORKSHEET”.
Refer to AT- 5 8
.
GO TO AT- 2 0 8 , "In “N” Position, Vehicle Moves" .
Continue “Road Test”.
NO >> GO TO 5.
5. CHECK SHIFT SHOCK
1. Apply foot brake.
2. Move selector lever to “R” position.
Is there large shock when changing from
“N” to “R” position?
YES >>Mark the box on the “DIAGNOSTIC WORKSHEET”.
Refer to AT- 5 8
.
GO TO AT- 2 0 9 , "Large Shock. “N” → “R” Position" .
Continue “Road Test”.
NO >> GO TO 6.
6. CHECK VEHICLE MOVE
Release foot brake for several seconds.
Does vehicle creep backward when foot brake is released?
YES >> GO TO 7.
NO >>
Mark the box on the “DIAGNOSTIC WORKSHEET”.
Refer to AT- 5 8
.
GO TO AT- 2 1 0 , "Vehicle Does Not Creep Backward
In “R” Position" .
Continue “Road Test”.
SAT771B
SAT797A
SAT772B
SAT799A
Page 2338 of 4555
AT-74
[EURO-OBD]
TROUBLE DIAGNOSIS — BASIC INSPECTION
7. CHECK VEHICLE MOVE
Move selector lever to “D”, “2” and “1” positions and check if vehicle
creeps forward.
Does vehicle creep forward in all three positions?
YES >> Go to AT- 7 4 , "3. CRUISE TEST" .
NO >>
Mark the box on the “DIAGNOSTIC WORKSHEET”.
Refer to AT- 5 8
.
GO TO AT- 2 1 2 , "Vehicle Does Not Creep Forward In
“D”, “2” Or “1” Position" .
Continue “Road Test”.
3. CRUISE TEST
Check all items listed in Parts 1 through 3.
With CONSULT-II
Using CONSULT-II, conduct a cruise test and record the result.
Print the result and ensure that shifts and lock-ups take place as
per Shift Schedule.
CONSULT-II Setting Procedure
1. Turn ignition switch ON. (Do not start engine.)
2. Touch “START (NISSAN BASED VHCL)”.
3. Touch “A/T”.
If “A/T” is not indicated, go to GI-35, "
CONSULT-II Data Link
Connector (DLC) Circuit" .
SAT773B
SAT601J
SAIA0450E
SAT014K
Page 2339 of 4555
TROUBLE DIAGNOSIS — BASIC INSPECTION
AT-75
[EURO-OBD]
D
E
F
G
H
I
J
K
L
MA
B
AT
4. Touch “DATA MONITOR”.
5. Touch “MAIN SIGNALS” or “TCM INPUT SIGNALS”.
6. Select “Numerical Display”, “Barchart Display” or “Line Graph
Display”.
7. Touch “SETTING” to recording condition (“AUTO TRIG” or
“MANU TRIG”) and touch “BACK”.
8. Touch “Start”.
9. When performing cruise test, touch “RECORD”.
SCIA5358E
SCIA5681E
SAT973J
SAT134K
Page 2340 of 4555
AT-76
[EURO-OBD]
TROUBLE DIAGNOSIS — BASIC INSPECTION
10. After finishing cruise test part 1, touch “STOP”.
11. Touch “STORE” and touch “BACK”.
12. Touch “DISPLAY”.
13. Touch “PRINT”.
14. Check the monitor data printed out.
15. Continue cruise test part 2 and 3.
SAT135K
SAT987J
SAT974J
SAT975J
Page 2341 of 4555
TROUBLE DIAGNOSIS — BASIC INSPECTION
AT-77
[EURO-OBD]
D
E
F
G
H
I
J
K
L
MA
B
AT
Without CONSULT-II
Accelerator pedal position (APP) sensor can be checked by volt-
age across terminals 41 and 42 of TCM.
SCIA0710E
Page 2342 of 4555
AT-78
[EURO-OBD]
TROUBLE DIAGNOSIS — BASIC INSPECTION
Cruise Test — Part 1
1. CHECK STARTING GEAR (D1 ) POSITION
1. Drive vehicle for approximately 10 minutes to warm engine oil and ATF up to operating temperature.
2. Park vehicle on flat surface.
3. Set overdrive control switch to ON position.
4. Move selector lever to “P” position.
5. Start engine.
6. Move selector lever to “D” position.
7. Accelerate vehicle by constantly depressing accelerator pedal
half-way.
Read gear position. Refer to AT- 4 6 , "
DATA MONITOR
MODE (A/T)" .
Does vehicle start from D
1 ?
YES >> GO TO 2.
NO >>
Mark the box on the “DIAGNOSTIC WORKSHEET”.
Refer to AT- 5 8
.
GO TO AT- 2 1 4 , "Vehicle Cannot Be Started From D1"
.
Continue “Road Test”. ATF operating temperature: 50 - 80°C (122 - 176°F)
SAT774B
SAT775B
SAT495G
Page 2343 of 4555
![NISSAN X-TRAIL 2005 Service Repair Manual TROUBLE DIAGNOSIS — BASIC INSPECTION
AT-79
[EURO-OBD]
D
E
F
G
H
I
J
K
L
MA
B
AT
2. CHECK SHIFT-UP (D1 TO D2 )
Check shift-up (D
1 to D2 ).
Specified speed when shifting from D
1 to D2. Refer t NISSAN X-TRAIL 2005 Service Repair Manual TROUBLE DIAGNOSIS — BASIC INSPECTION
AT-79
[EURO-OBD]
D
E
F
G
H
I
J
K
L
MA
B
AT
2. CHECK SHIFT-UP (D1 TO D2 )
Check shift-up (D
1 to D2 ).
Specified speed when shifting from D
1 to D2. Refer t](/manual-img/5/57403/w960_57403-2342.png)
TROUBLE DIAGNOSIS — BASIC INSPECTION
AT-79
[EURO-OBD]
D
E
F
G
H
I
J
K
L
MA
B
AT
2. CHECK SHIFT-UP (D1 TO D2 )
Check shift-up (D
1 to D2 ).
Specified speed when shifting from D
1 to D2. Refer to AT- 5 3 0 , "VEHICLE SPEED WHEN SHIFTING GEARS
AND THROTTLE POSITION" .
Read gear position, throttle opening and vehicle speed.
Refer to AT- 4 6 , "
DATA MONITOR MODE (A/T)" .
Does A/T shift from D
1 to D2 at the specified speed?
YES >> GO TO 3.
NO >>
Mark the box on the “DIAGNOSTIC WORKSHEET”.
Refer to AT- 5 8
.
GO TO AT- 2 1 7 , "A/T Does Not Shift: D1 → D2 Or
Does Not Kickdown: D4 → D2" .
Continue “Road Test”.
3. CHECK SHIFT-UP (D2 TO D3 )
Check shift-up (D
2 to D3 ).
Specified speed when shifting from D
2 to D3. Refer to AT- 5 3 0 , "VEHICLE SPEED WHEN SHIFTING GEARS
AND THROTTLE POSITION" .
Read gear position, throttle opening and vehicle speed.
Refer to AT- 4 6 , "
DATA MONITOR MODE (A/T)" .
Does A/T shift from D
2 to D3 at the specified speed?
YES >> GO TO 4.
NO >>
Mark the box on the “DIAGNOSTIC WORKSHEET”.
Refer to AT- 5 8
.
GO TO AT- 2 2 0 , "A/T Does Not Shift: D2 → D3" .
Continue “Road Test”.
4. CHECK SHIFT-UP (D3 TO D4 )
Check shift-up (D
3 to D4 ).
Specified speed when shifting from D
3 to D4. Refer to AT- 5 3 0 , "VEHICLE SPEED WHEN SHIFTING GEARS
AND THROTTLE POSITION" .
Read gear position, throttle opening and vehicle speed.
Refer to AT- 4 6 , "
DATA MONITOR MODE (A/T)" .
Does A/T shift from D
3 to D4 at the specified speed?
YES >> GO TO 5.
NO >>
Mark the box on the “DIAGNOSTIC WORKSHEET”.
Refer to AT- 5 8
.
GO TO AT- 2 2 2 , "A/T Does Not Shift: D3 → D4" .
Continue “Road Test”.
SAT954I
SAT955I
SAT956I
Page 2344 of 4555
![NISSAN X-TRAIL 2005 Service Repair Manual AT-80
[EURO-OBD]
TROUBLE DIAGNOSIS — BASIC INSPECTION
5. CHECK LOCK-UP (D4 TO D4 L/U)
Check lock-up (D
4 to D4 L/U).
Specified speed when lock-up occurs. Refer to AT- 5 3 0 , "
VEHICLE SPEED WH NISSAN X-TRAIL 2005 Service Repair Manual AT-80
[EURO-OBD]
TROUBLE DIAGNOSIS — BASIC INSPECTION
5. CHECK LOCK-UP (D4 TO D4 L/U)
Check lock-up (D
4 to D4 L/U).
Specified speed when lock-up occurs. Refer to AT- 5 3 0 , "
VEHICLE SPEED WH](/manual-img/5/57403/w960_57403-2343.png)
AT-80
[EURO-OBD]
TROUBLE DIAGNOSIS — BASIC INSPECTION
5. CHECK LOCK-UP (D4 TO D4 L/U)
Check lock-up (D
4 to D4 L/U).
Specified speed when lock-up occurs. Refer to AT- 5 3 0 , "
VEHICLE SPEED WHEN PERFORMING LOCK-UP"
.
Read vehicle speed, throttle opening when lock-up duty
becomes 94%. Refer to AT- 4 6 , "
DATA MONITOR MODE (A/T)" .
Does A/T perform lock-up at the specified speed?
YES >> GO TO 6.
NO >>
Mark the box on the “DIAGNOSTIC WORKSHEET”.
Refer to AT- 5 8
.
GO TO AT- 2 2 4 , "A/T Does Not Perform Lock-up" .
Continue “Road Test”.
6. CHECK LOCK-UP HOLD
Check lock-up hold.
When lock-up duty becomes 94%. Refer to AT- 4 6 , "
DATA MONITOR MODE (A/T)" .
Does A/T hold lock-up condition for more than 30 seconds?
YES >> GO TO 7.
NO >>
Mark the box on the “DIAGNOSTIC WORKSHEET”. Refer to AT- 5 8 .
GO TO AT- 2 2 5 , "A/T Does Not Hold Lock-up Condition" .
Continue “Road Test”.
7. CHECK SHIFT-DOWN (D4 L/U TO D4 )
Release accelerator pedal.
When lock-up duty becomes 4%. Refer to AT- 4 6 , "
DATA
MONITOR MODE (A/T)" .
Is lock-up released when accelerator pedal is released?
YES >> GO TO 8.
NO >>
Mark the box on the “DIAGNOSTIC WORKSHEET”.
Refer to AT- 5 8
.
GO TO AT- 2 2 7 , "Lock-Up Is Not Released" .
Continue “Road Test”.
8. CHECK SHIFT-DOWN (D4 TO D3 )
Decelerate vehicle by applying foot brake lightly.
Read gear position and engine speed. Refer to AT- 4 6 , "
DATA
MONITOR MODE (A/T)" .
Does engine speed return to idle smoothly when A/T is shifted from
D4 to D3 ?
YES >> 1. Stop vehicle.
2. Go to AT- 8 1 , "
Cruise Test — Part 2" .
NO >>
Mark the box on the “DIAGNOSTIC WORKSHEET”.
Refer to AT- 5 8
.
GO TO AT- 2 2 8 , "Engine Speed Does Not Return To
Idle (Light Braking D4 → D3 )" .
Continue “Road Test”.
SAT957I
SAT958I
SAT959I