Page 4273 of 4555
CAN SYSTEM (TYPE 2)
LAN-29
[CAN]
C
D
E
F
G
H
I
J
L
MA
B
LAN
TKWB1671E
Page 4274 of 4555
![NISSAN X-TRAIL 2005 Service Repair Manual LAN-30
[CAN]
CAN SYSTEM (TYPE 2)
Work FlowEKS00LUC
1. Print all the data of “SELF-DIAG RESULTS” for “ENGINE”, “ABS” and “ALL MODE AWD/4WD” displayed
on CONSULT-II.
2. Print all the d NISSAN X-TRAIL 2005 Service Repair Manual LAN-30
[CAN]
CAN SYSTEM (TYPE 2)
Work FlowEKS00LUC
1. Print all the data of “SELF-DIAG RESULTS” for “ENGINE”, “ABS” and “ALL MODE AWD/4WD” displayed
on CONSULT-II.
2. Print all the d](/manual-img/5/57403/w960_57403-4273.png)
LAN-30
[CAN]
CAN SYSTEM (TYPE 2)
Work FlowEKS00LUC
1. Print all the data of “SELF-DIAG RESULTS” for “ENGINE”, “ABS” and “ALL MODE AWD/4WD” displayed
on CONSULT-II.
2. Print all the data of “CAN DIAG SUPPORT MNTR” for “ENGINE”, “ABS” and “ALL MODE AWD/4WD” dis-
played on CONSULT-II.
3. Attach the printed sheet of “SELF-DIAG RESULTS” and “CAN DIAG SUPPORT MNTR” onto the check
sheet. Refer to LAN-31, "
CHECK SHEET" .
4. Based on the results of “CAN DIAG SUPPORT MNTR”, put a check marks onto the items with “NG” or
“UNKWN” in the check sheet table. Refer to LAN-31, "
CHECK SHEET" .
NOTE:
If a check mark is put on “NG” on “INITIAL DIAG (Initial diagnosis)”, replace the control unit.
The “CAN DIAG SUPPORT MNTR” items, which are not in check sheet table, are not related to diag-
nostic procedure on service manual.
So it is not necessary to check the status of the “CAN DIAG SUPPORT MNTR” items not in check
sheet table.
5. According to the check sheet results (example), start inspection. Refer to LAN-32, "
CHECK SHEET
RESULTS (EXAMPLE)" .
PKIA8260E
PKIA8343E
Page 4275 of 4555
CAN SYSTEM (TYPE 2)
LAN-31
[CAN]
C
D
E
F
G
H
I
J
L
MA
B
LAN
CHECK SHEET
NOTE:
If a check mark is put on “NG” on “INITIAL DIAG (Initial diagnosis)”, replace the control unit.
PKIB9041E
Page 4276 of 4555
LAN-32
[CAN]
CAN SYSTEM (TYPE 2)
CHECK SHEET RESULTS (EXAMPLE)
NOTE:
If a check mark is put on “NG” on “INITIAL DIAG (Initial diagnosis)”, replace the control unit.
Case 1
Check harness between ABS actuator and electric unit (control unit) and 4WD control unit. Refer to LAN-37,
"Inspection Between ABS Actuator and Electric Unit (Control Unit) and 4WD Control Unit Circuit" .
PKIB9042E
PKIA6502E
Page 4277 of 4555
CAN SYSTEM (TYPE 2)
LAN-33
[CAN]
C
D
E
F
G
H
I
J
L
MA
B
LAN
Case 2
Check ECM circuit. Refer to LAN-38, "ECM Circuit Inspection" .
PKIB9043E
PKIA6503E
Page 4278 of 4555
LAN-34
[CAN]
CAN SYSTEM (TYPE 2)
Case 3
Check ABS actuator and electric unit (control unit) circuit. Refer to LAN-39, "ABS Actuator and Electric Unit
(Control Unit) Circuit Inspection" .
PKIB9051E
PKIA6504E
Page 4279 of 4555
CAN SYSTEM (TYPE 2)
LAN-35
[CAN]
C
D
E
F
G
H
I
J
L
MA
B
LAN
Case 4
Check 4WD control unit circuit. Refer to LAN-39, "4WD Control Unit Circuit Inspection" .
PKIB9052E
PKIA6505E
Page 4280 of 4555
LAN-36
[CAN]
CAN SYSTEM (TYPE 2)
Case 5
Check combination meter circuit. Refer to LAN-40, "Combination Meter Circuit Inspection" .
Case 6
Check CAN communication circuit. Refer to LAN-40, "CAN Communication Circuit Inspection" .
PKIB9046E
PKIA6506E
PKIB9054E