2007 INFINITI M35 Factory Service Manual

oil additives rear view mirror fuel filter brake sensor headlight aiming clutch

Page 3217 of 4647

INFINITI M35 2007 Factory Service Manual GW-18
POWER WINDOW SYSTEM
Revision: 2007 April2007 M35/M45
ANTI-PINCH SYSTEM
Power window main switch and each power window sub-switch recognizes and controls the door glass condi-
tion by reading enc

Page 3218 of 4647

INFINITI M35 2007 Factory Service Manual POWER WINDOW SYSTEM
GW-19
C
D
E
F
G
H
J
K
L
MA
B
GW
Revision: 2007 April2007 M35/M45
FAIL-SAFE CONTROL
The encoder signal detects the up / down speed / detection of door glass. If the malfunction is d

POWER WINDOW SYSTEM
GW-19
C
D
E
F
G
H
J
K
L
MA
B
GW
Revision: 2007 April2007 M35/M45
FAIL-SAFE CONTROL
The encoder signal detects the up / down speed / detection of door glass. If the malfunction is detected to the
encoder signal or the difference between the glass fully closed position (memorized in power window main
switch or power window sub-switch) and the actual glass position is detected, it shifts into the fail-safe control
It is shifts into the fail-safe control, the initialization is not performed and the following function is not activated
Auto up operation
Anti-pinch function
It is shifts into the fail-safe control, performed the initialization to resume normal operation condition.
POWER WINDOW CONTROL BY THE KEY CYLINDER SWITCH
When ignition key switch is OFF, front power window can be opened or closed by turning the key cylinder
switch UNLOCK / LOCK position more than 1.5 second over condition.
Power window can be opened as the door key cylinder is kept fully turning to the UNLOCK position.
Power window can be closed as the door key cylinder is kept fully turning to the LOCK position.
The power window DOWN stops when the following operations are carried out.
While performing open / close the window, power window is stopped at the position as the door key cylin-
der is placed on NEUTRAL.
When the ignition switch is turned ON while the power window DOWN is operated.
CAN Communication System DescriptionNIS0021H
CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle mul-
tiplex communication line with high data communication speed and excellent error detection ability. Many elec-
tronic control units are equipped onto a vehicle, and each control unit shares information and links with other
control units during operation (not independent). In CAN communication, control units are connected with 2
communication lines (CAN H line, CAN L line) allowing a high rate of information transmission with less wiring.
Each control unit transmits/receives data but selectively reads required data only.
CAN Communication UnitNIS0021I
Refer to LAN-50, "CAN System Specification Chart"
DTC Condition
Pulse sensor detects malfunctionDuring the glass opening/closing operation, a pulse signal is continuously
detected for the specified terms or more
Both pulse sensors detect malfunctionDuring the glass opening/closing operation, both pulse signals are not
detected for the specified values or more
Pulse direction malfunctionThe following condition is detected for the specified values or more. The
pulse signal (detected during glass open/close operation) detects the
opposite direction to the driving direction of power window motor.
Glass recognized position malfunction 1During the glass opening/closing operation, the difference between the
glass fully closed position (memorized in power window main switch or
power window sub-switch) and the actual glass position is detected for
the specified values or more.
Glass recognized position malfunction 2During the glass opening/closing operation, a pulse count is detected that
is above the glass full stroke
Glass fully closed position not updated malfunctionContinuously perform the glass open/close operation (with the glass not
fully closed) at the specified value (approx. 10 time) or more

Page 3219 of 4647

INFINITI M35 2007 Factory Service Manual GW-20
POWER WINDOW SYSTEM
Revision: 2007 April2007 M35/M45
SchematicNIS0021J
TIWT1344E

Page 3220 of 4647

INFINITI M35 2007 Factory Service Manual POWER WINDOW SYSTEM
GW-21
C
D
E
F
G
H
J
K
L
MA
B
GW
Revision: 2007 April2007 M35/M45
Wiring Diagram — WINDOW —NIS0021K
T I W T 2 111 E

Page 3221 of 4647

INFINITI M35 2007 Factory Service Manual GW-22
POWER WINDOW SYSTEM
Revision: 2007 April2007 M35/M45
TIWT2112E

Page 3222 of 4647

INFINITI M35 2007 Factory Service Manual POWER WINDOW SYSTEM
GW-23
C
D
E
F
G
H
J
K
L
MA
B
GW
Revision: 2007 April2007 M35/M45
TIWT1347E

Page 3223 of 4647

INFINITI M35 2007 Factory Service Manual GW-24
POWER WINDOW SYSTEM
Revision: 2007 April2007 M35/M45
TIWT1348E

Page 3224 of 4647

INFINITI M35 2007 Factory Service Manual POWER WINDOW SYSTEM
GW-25
C
D
E
F
G
H
J
K
L
MA
B
GW
Revision: 2007 April2007 M35/M45
TIWT2036E

Load next 8 pages

Page: < prev 1-10 ... 3185-3192 3193-3200 3201-3208 3209-3216 3217-3224 3225-3232 3233-3240 3241-3248 3249-3256 ... 4648 next >

buttons engine seats oil reset fuel cap release brake sensor