2001 NISSAN ALMERA TINO Service Repair Manual

Page 833 of 3051

NISSAN ALMERA TINO 2001  Service Repair Manual CAUTION:
Do not use ECM ground terminals when measuring input/
output voltage. Doing so may result in damage to the ECMs
transistor. Use a ground other than ECM terminals, such as
the ground.
INTAKE

Page 834 of 3051

NISSAN ALMERA TINO 2001  Service Repair Manual Wiring DiagramNLEC1278MODELS WITH INTAKE AIR TEMPERATURE SENSOR
ON INTAKE AIR DUCT
NLEC1278S01
YEC749
INTAKE AIR TEMPERATURE SENSORQG18DE
Wiring Diagram
EC-409

Page 835 of 3051

NISSAN ALMERA TINO 2001  Service Repair Manual MODELS WITH INTAKE AIR TEMPERATURE SENSOR
IN MASS AIR FLOW SENSOR
NLEC1278S02
YEC892
INTAKE AIR TEMPERATURE SENSORQG18DE
Wiring Diagram (Contd)
EC-410

Page 836 of 3051

NISSAN ALMERA TINO 2001  Service Repair Manual Diagnostic ProcedureNLEC1279
1 CHECK OVERALL FUNCTION
1. Turn ignition switch ªONº.
2. Check voltage between ECM terminal 64 and ground with CONSULT-II or tester.
SEF004Y
OK or NG
OK©INSPECTION END

Page 837 of 3051

NISSAN ALMERA TINO 2001  Service Repair Manual 3 CHECK POWER SUPPLY (Models with intake air temperature in mass air flow sensor)
1. Turn ignition switch ªOFFº.
2. Disconnect intake air temperature sensor (mass air flow sensor) harness connector.

Page 838 of 3051

NISSAN ALMERA TINO 2001  Service Repair Manual 6 DETECT MALFUNCTIONING PART
Check the following.
+Joint connector-1 (where fitted)
+Harness connectors E75, F35 (where fitted)
+Harness for open or short between ECM and intake air temperature sensor

Page 839 of 3051

NISSAN ALMERA TINO 2001  Service Repair Manual SEF463R
SEF288D
Component DescriptionNLEC1214The heated oxygen sensor 1 (front) is placed into the exhaust
manifold. It detects the amount of oxygen in the exhaust gas com-
pared to the outside air. T

Page 840 of 3051

NISSAN ALMERA TINO 2001  Service Repair Manual Wiring DiagramNLEC1220MODELS WITH ECM IN ENGINE COMPARTMENTNLEC1220S03
YEC676
HEATED OXYGEN SENSOR 1 (FRONT)QG18DE
Wiring Diagram
EC-415