Page 1865 of 3051
SchematicNLEL0444MODELS WITH NATS SECURITY INDICATOR ON DASH
BOARD
NLEL0444S02
YEL991B
METERS AND GAUGES
Schematic
EL-134
Page 1866 of 3051
MODELS WITH NATS SECURITY INDICATOR IN
COMBINATION METER
NLEL0444S03
YEL489C
METERS AND GAUGES
Schematic (Cont'd)
EL-135
Page 1867 of 3051
ConstructionNLEL0445
NEL739
METERS AND GAUGES
Construction
EL-136
Page 1868 of 3051
Wiring Diagram Ð METER ÐNLEL0446MODELS WITH FUSE AND FUSIBLE LINK BOX E43NLEL0446S01
YEL894B
METERS AND GAUGES
Wiring Diagram Ð METER Ð
EL-137
Page 1869 of 3051
YEL895B
METERS AND GAUGES
Wiring Diagram Ð METER Ð (Cont'd)
EL-138
Page 1870 of 3051
MODELS WITH FUSE AND FUSIBLE LINK BOX E90NLEL0446S02
YEL419C
METERS AND GAUGES
Wiring Diagram Ð METER Ð (Cont'd)
EL-139
Page 1871 of 3051
YEL420C
METERS AND GAUGES
Wiring Diagram Ð METER Ð (Cont'd)
EL-140
Page 1872 of 3051

Combination Meter Self-DiagnosisNLEL0447PERFORMING SELF-DIAGNOSIS MODENLEL0447S011. Turn the ignition switch to the ªLOCKº position.
2. Press both reset buttons on the combination meter and keep
them depressed.
3. Turn the ignition switch to the ªONº position, while keeping the
reset buttons pressed.
4. Release both reset buttons then self-diagnosis will start. The
sequence (A to L) is activated by press the either reset buttons.
NOTE:
If either reset button is not pressed for 20 seconds at each step or
if the ignition switch is turned OFF, the self-diagnosis mode is
exited.
Check items Display Remarks
A) Odometer segment test
SEL434X
All odo trip meter segments are ON.
B) Work instruction code
SEL435X
This information is not used for service. Please skip this
step.
C) Software code
NEL735
This information is not used for service. Please skip this
step.
D) EEPROM code
NEL736
This information is not used for service. Please skip this
step.
E) Hardware code
NEL737
This information is not used for service. Please skip this
step.
F) PCB code
NEL738
This information is not used for service. Please skip this
step.
G)Meter/gauge test
(Sweeping movement)
SEL440X
Tachometer, speedometer, fuel level gauge and water
temperature gauge have sweeping movement test.
(The meter/gauges operate MIN.®MAX., MAX.®MIN.
for 2 times)
The odo trip meter segment flashes during the sweep
movement.
METERS AND GAUGES
Combination Meter Self-Diagnosis
EL-141