1998 OPEL FRONTERA Workshop Manual

washer fluidautomatic transmission fluidtrunkcabin filteroil changemirror
Popular search:
cruise controlremote startcatalytic converterfuel tank removalrelaydirectionspark plugs replace
Previous
Next
Load previous 8 pages

Page 5025 of 6000

OPEL FRONTERA 1998 Workshop Manual 6G–6 ENGINE LUBRICATION 051RW001 Legend (1) Around Bolt Holes (2) Around Dowel Pin 8. Install the new oil seal (12). Apply engine oil to the oil seal lip before installation then use 5–8840–2287

Page 5026 of 6000

OPEL FRONTERA 1998 Workshop Manual 6G–7 ENGINE LUBRICATION Oil Pan and Crankcase Removal 1. Disconnect battery ground cable. 2. Drain engine oil. 3. Lift vehicle by supporting the frame. 4. Remove front wheels. 5. Remove oil level di

Page 5027 of 6000

OPEL FRONTERA 1998 Workshop Manual 6G–8 ENGINE LUBRICATION 3. Install crankcase, tighten crankcase fixing bolts to the specified torque. Torque : 10 Nꞏm (1.0 Kgꞏm/89 lb in) 013RW004 2. Install oil pan 1. Remove residual seal

Page 5028 of 6000

OPEL FRONTERA 1998 Workshop Manual 6G–9 ENGINE LUBRICATION 6. Install suspension cross member and tighten fixing bolts to the specified torque. Torque : 78 Nꞏm (8.0 Kgꞏm/58 lb ft) 013RW007 7. Install radiator under fan shro

Page 5029 of 6000

OPEL FRONTERA 1998 Workshop Manual 6G–10 ENGINE LUBRICATION Oil Pump Removal 1. Disconnect battery ground cable. 2. Drain engine oil. 3. Remove crankcase assembly. Refer to removal procedure for Oil Pan and Crankcase in this

Page 5030 of 6000

OPEL FRONTERA 1998 Workshop Manual 6G–11 ENGINE LUBRICATION 4. Install oil filter assembly and tighten bolts to the specified torque. Torque : 25 Nꞏm (2.5 Kgꞏm/18 lb ft) 050RW001 Legend (1) Oil Pump (2) Oil Filter (3) Oil

Page 5031 of 6000

OPEL FRONTERA 1998 Workshop Manual 6G–12 ENGINE LUBRICATION Oil Pump Oil Seal Removal 1. Disconnect battery ground cable. 2. Drain engine oil. 3. Remove crankshaft pulley. Refer to removal procedure for Crankshaft Pulley in this manu

Page 5032 of 6000

OPEL FRONTERA 1998 Workshop Manual 6G–13 ENGINE LUBRICATION Oil Filter Removal 1. Disconnect battery ground cable. 2. Drain engine oil. 3. Remove oil filter using 5-8840-0203-0 filter wrench. Installation 1. Clean filter fitting surf
Load next 8 pages
Page:   < prev 1-10 ... 4993-5000 5001-5008 5009-5016 5017-5024 5025-5032 5033-5040 5041-5048 5049-5056 5057-5064 ... 6000 next >
low beamserviceground clearanceremote controloil pressurespark plugs
Popular search:
clutchInstrument paneloctaneinterior lightseat adjustmentchargingDifferential oil