1995 TOYOTA SUPRA Service Repair Manual

Page 281 of 2543

TOYOTA SUPRA 1995  Service Repair Manual A340E(Others)  AUTOMATIC TRANSMISSIONCOMPONENT PARTS REMOVAL -
AT-24
(c) Remove the oil apply tube and gasket from the extension
housing.
11. SUPRA:
REMOVE SPEEDOMETER DRIVE GEAR AND BALL
(a) Using sn

Page 282 of 2543

TOYOTA SUPRA 1995  Service Repair Manual A340E(Others)  AUTOMATIC TRANSMISSIONCOMPONENT PARTS REMOVAL -
AT-25
15. REMOVE OIL PAN
NOTICE: Do not turn the transmission over as this will con-
taminate the valve body with any foreign matter at t

Page 283 of 2543

TOYOTA SUPRA 1995  Service Repair Manual A340E(Others)  AUTOMATIC TRANSMISSIONCOMPONENT PARTS REMOVAL -
AT-26
19. REMOVE SOLENOID WIRING
(a) Disconnect the 3 connectors from No.1, No.2 and lock-
up solenoids.
(b) Remove the bolt and stopper

Page 284 of 2543

TOYOTA SUPRA 1995  Service Repair Manual A340E(Others)  AUTOMATIC TRANSMISSIONCOMPONENT PARTS REMOVAL -
AT-27
(b) Remove the 2 springs from C
0 accumulator piston.
(c) Applying compressed air to the oil hole, remove the B
2
and C2 accumulato

Page 285 of 2543

TOYOTA SUPRA 1995  Service Repair Manual A340E(Others)  AUTOMATIC TRANSMISSIONCOMPONENT PARTS REMOVAL -
AT-28
23. REMOVE PARKING LOCK ROD AND PAWL
(a) Remove the parking lock pawl bracket.
(b) Disconnect  the parking lock rod from the manual

Page 286 of 2543

TOYOTA SUPRA 1995  Service Repair Manual A340E(Others)  AUTOMATIC TRANSMISSIONCOMPONENT PARTS REMOVAL -
AT-29
(d) Using a screwdriver, remove the 2 oil seals.
25. REMOVE OIL PUMP
(a) Stand up the transmission.
(b) Remove the 7 bolts holding

Page 287 of 2543

TOYOTA SUPRA 1995  Service Repair Manual A340E(Others)  AUTOMATIC TRANSMISSIONCOMPONENT PARTS REMOVAL -
AT-30
(b) Remove the race and assembled bearing and race.
27. REMOVE OVERDRIVE PLANETARY RING GEAR
(a) Remove the overdrive planetary rin

Page 288 of 2543

TOYOTA SUPRA 1995  Service Repair Manual A340E(Others)  AUTOMATIC TRANSMISSIONCOMPONENT PARTS REMOVAL -
AT-31
29. REMOVE FLANGES, PLATES AND DISCS OF OVER-
DRIVE BRAKE
(a) Remove the snap ring.
(b) Remove the flanges, plates and discs as a s