Page 353 of 2543
A340E(Others) AUTOMATIC TRANSMISSIONUPPER VALVE BODY -
AT-96
2. CHECK BALL
MarkCheck ballDiameter mm (in.)
(A)Rubber ball6.35 (0.2500)
(B)Rubber ball5.45 (0.2181)
Page 354 of 2543
A340E(Others) AUTOMATIC TRANSMISSIONUPPER VALVE BODY -
AT-97
3. STRAINER
Page 355 of 2543
A340E(Others) AUTOMATIC TRANSMISSIONLOWER VALVE BODY -
AT-98
LOWER VALVE BODY
COMPONENTS
AT06F-03
Page 356 of 2543
A340E(Others) AUTOMATIC TRANSMISSIONLOWER VALVE BODY - A340E(Others) AUTOMATIC TRANSMISSIONLOWER VALVE BODY -
AT-99
VALVE BODY SPRING SPECIFICATIONS
HINT: During reassembly please refer to the spring specifications below to help you to identify the differ-
ent springs.
MarkName (Color)Free length / Outer diameter
mm (in.)Total No. of coils
(A)Check valve (None)20.2 (0.796) / 12.1 (0.476)6.5
(B)Pressure relief valve (None)11.2 (0.441) / 6.4 (0.252)7.5
(C)1-2 shift valve (Purple)30.8 (1.213) / 9.7 (0.382)10.5
(D)Primary regulator valve (Purple)62.3 (2.453) / 18.6 (0.732)12.5
(E)SUPRA
Accumulator control valve (White)36.1 (1.421) / 8.9 (0.327)14.0
(E)OTHERS
Accumulator control valve (Pink)33.9 (1.335) / 8.8 (0.346)12.0
AT06G-04
Page 357 of 2543
A340E(Others) AUTOMATIC TRANSMISSIONLOWER VALVE BODY -
AT-100
RETAINERS, CLIP, CHECK BALLS, STRAINERS, SPRINGS AND VALVES
LOCATION
1. RETAINER AND CLIP
MarkRetainerHeight / Width / Thickness
mm (in.)
(A)1-2 shift valve16.5 (0.650) / 6.0 (0.236) / 3.2 (0.126)
(B)Accumulator control valve21.2 (0.835) / 5.0 (0.197) / 3.2 (0.126)
(C)Primary regulator valve16.2 (0.638) / 5.0 (0.197) / 3.2 (0.126)
2. CHECK BALL
Check ballDiameter mm (in.)
Rubber ball5.54 (0.2181)
Steel ball6.35 (0.2500)
AT06H-06
Page 358 of 2543
A340E(Others) AUTOMATIC TRANSMISSIONLOWER VALVE BODY -
AT-101
3. STRAINER, SPRING AND VALVE
MarkStrainerHeight / Diameter mm (in.)
(A)Solenoid oil strainer12.4 (0.448) / 10.3 (0.406)
(B)Throttle oil strainer19.5 (0.768) / 10.3 (0.406)
Page 359 of 2543
A340E(Others) AUTOMATIC TRANSMISSIONTRANSMISSION CASE -
AT-102
TRANSMISSION CASE
TRANSMISSION CASE INSPECTION
INSPECT TRANSMISSION CASE BUSHING
Using a cylinder gauge, measure the inside diameter of
the transmission case rear bushing.
Maximum inside diameter:
38.19 mm (1.5035 in.)
If the inside diameter is greater than the maximum, re-
place the transmission case.
AT06J-06
Page 360 of 2543
A340E(Others) AUTOMATIC TRANSMISSIONEXTENSION HOUSING -
AT-103
EXTENSION HOUSING
EXTENSION HOUSING INSPECTION
INSPECT EXTENSION HOUSING BUSHING
Using a cylinder gauge, measure the inside diameter of
the extension housing bushing.
Maximum inside diameter:
40.09 mm (1.5783 in.)
If the inside diameter is greater than the maximum, re-
place the extension housing.
AT06K-03