Page 1785 of 2898
Wiring Diagram Ð WIP/R Ð/HatchbackNJEL0458
YEL362C
REAR WIPER AND WASHER
Wiring Diagram Ð WIP/R Ð/Hatchback
EL-227
Page 1786 of 2898
YEL363C
REAR WIPER AND WASHER
Wiring Diagram Ð WIP/R Ð/Hatchback (Cont'd)
EL-228
Page 1787 of 2898

GEL269
SEL451XA
Removal and InstallationNJEL0301WIPER ARMSNJEL0301S011. Prior to wiper arm installation, turn on wiper switch to operate
wiper motor and then turn it ªOFFº (Auto Stop).
2. Lift the blade up and then set it down onto glass surface. Set
the black center to clearance ªEº immediately before tighten-
ing the nut.
3. Eject washer fluid. Turn on wiper switch to operate wiper motor
and then turn it ªOFFº.
4. Ensure that wiper blades stop on the lowest heat wire.
+Tighten windshield wiper arm nuts to specified torque.
: 12.7 - 17.6 N´m (1.3 - 1.8 kg-m, 10 - 13 ft-lb)
SEL024J
+Before reinstalling wiper arm, clean up the pivot area as
illustrated. This will reduce possibility of wiper arm loose-
ness.
GEL270
Washer Nozzle AdjustmentNJEL0302+Adjust washer nozzle with suitable tool as shown in the figure
at left.
Adjustable range:±15É (In any direction)
GEL271
Unit: mm (in)
*1 235 (9.25)
*2 190 (7.48)
*: The diameter of this circle is less than 60 mm (2.36 in).
REAR WIPER AND WASHER
Removal and Installation
EL-229
Page 1788 of 2898
SEL452XA
The diameter of the washer spit circle is less than 30 mm (1.18 in).
Washer Tube LayoutNJEL0303
GEL272
SEL453X
REAR WIPER AND WASHER
Washer Nozzle Adjustment (Cont'd)
EL-230
Page 1789 of 2898
Wiring Diagram Ð HLC Ð/SedanNJEL0375
HEL391B
HEADLAMP WASHER
Wiring Diagram Ð HLC Ð/Sedan
EL-231
Page 1790 of 2898
Wiring Diagram Ð HLC Ð/HatchbackNJEL0459
YEL364C
HEADLAMP WASHER
Wiring Diagram Ð HLC Ð/Hatchback
EL-232
Page 1791 of 2898
SEL494X
SEL454X
Washer Tube LayoutNJEL0376
HEADLAMP WASHER
Washer Tube Layout
EL-233
Page 1792 of 2898
Wiring Diagram Ð HORN Ð/SedanNJEL0071
HEL392B
HORN
Wiring Diagram Ð HORN Ð/Sedan
EL-234