1991 LEXUS SC400 Service Repair Manual

Page 3313 of 4087

LEXUS SC400 1991  Service Repair Manual 
RECOMMENDED TOOLS
SA0W4±01
EQUIPMENT
SA039±02
\
 
\

\

Dial indicator 




Page 3314 of 4087

LEXUS SC400 1991  Service Repair Manual 
REAR AXLE HUB
COMPONENTS
SA03A±05
±
SUSPENSION AND AXLE REAR AXLE HUBSA±51 
WhereEverybodyKnowsYourName

Page 3315 of 4087

LEXUS SC400 1991  Service Repair Manual 
REAR AXLE CARRIER REMOVAL
SA0RY±03
1.  JACK UP VEHICLE AND REMOVE REAR WHEEL
2.  REMOVE REAR BRAKE CALIPER AND BRAKE DISC
(a)  Remove the 2 bolts and remove the brake caliper from therear axle hub.

Page 3316 of 4087

LEXUS SC400 1991  Service Repair Manual 
5.  REMOVE DRIVE SHAFT LOCK NUT
(a)  Install the brake disc and caliper.
(b)  Remove the cotter pin and lock cap.
(c)  While applying the brakes, remove the nut.
(d)  Remove the brake caliper and dis

Page 3317 of 4087

LEXUS SC400 1991  Service Repair Manual 
(d)  Slide the backing plate to the outside and disconnect theparking brake cable.
(e)  Remove the bolt and nut and disconnect the strut rod.
(f)  Remove the nut.
(g)  Using SST, disconnect the No.1

Page 3318 of 4087

LEXUS SC400 1991  Service Repair Manual 
(i)  Using SST, disconnect the No.2 lower suspension arm.SST 09610±20012
NOTICE: Be careful not to damage the dust boot.
(j)  Remove the nut.
(k)  Using SST,  disconnect the upper arm and remove the

Page 3319 of 4087

LEXUS SC400 1991  Service Repair Manual 
3.  REMOVE AXLE HUB FROM AXLE CARRIER
(a)  Using SST, remove the axle hub.SST 09950±20017
(b)  Remove the backing plate.
(c)  Using SST, remove the inner race (outside) from the axle
hub.
SST 09950

Page 3320 of 4087

LEXUS SC400 1991  Service Repair Manual 
AXLE HUB ASSEMBLY
SA0S0±03
1. INSTALL BEARING
(a)  Using SST, install the bearing to the axle carrier.SST 09309±36010, 09608±32010
NOTICE: If the inner races come loose from the bearing
outer  rac