1998 JAGUAR X308 Workshop Manual

dead batteryaudiointerior lightsfuel consumptioncruise controlwindshield wipers
Popular search:
chargingwindowparking brake ORDER BY 40parking brake ORDER BY 80Powerwashair outletfront seat fuse
Previous
Next
Load previous 8 pages

Page 2241 of 2490

JAGUAR X308 1998 2.G Workshop Manual Installation 8. Slacken and remove four screws securing major gauge module/surround to fascia and withdraw surround. 1. Position major gauge surround on panel, routing harness multiplug

Page 2242 of 2490

JAGUAR X308 1998 2.G Workshop Manual Instrument Panel and Console - Instrument Panel Removal and Installation Removal 1. Turn ignition switch to position II. 2. Motor driver and front passenger seats rearward. 3. Position steering

Page 2243 of 2490

JAGUAR X308 1998 2.G Workshop Manual 22. Accessing via driver stowage bin aperture, disconnect facia harness to centre console harness multiplugs. 23. Release driver side facia harness to passenger compartment harness multiplug

Page 2244 of 2490

JAGUAR X308 1998 2.G Workshop Manual 26. Remove steering column tilt adjustme nt motor harness multiplug from retaining bracke t and disconnect multiplug. 27. Remove bolt securing facia moun ting bracket to RH side of tunnel.

Page 2245 of 2490

JAGUAR X308 1998 2.G Workshop Manual 30. Disconnect and remove J gate assembly for access. Refer to Section 307-05A N/A or 307-05B (S/C). 31. Remove two screws securing facia to air conditioning unit. 32. Remove bolts securi

Page 2246 of 2490

JAGUAR X308 1998 2.G Workshop Manual 35. From LH side footwell, remove nut securing facia harness ground eyelet to tunnel front stud and disconnect eyelet from stud. 36. Remove bolt securing facia moun ting bracket to LH side

Page 2247 of 2490

JAGUAR X308 1998 2.G Workshop Manual 39. CAUTION: The A post facia mounting brackets are pre- set to the body and must no t under any circumstances be disturbed. Remove two bolts securing facia to LHA post mounting bracket.

Page 2248 of 2490

JAGUAR X308 1998 2.G Workshop Manual reinforcement. 44. Remove illumination control module. 1. Disconnect illumination control module harness multiplug. 2. Slide module upwards to release it from facia. 45. Remove captive bo
Load next 8 pages
Page:   < prev 1-10 ... 2209-2216 2217-2224 2225-2232 2233-2240 2241-2248 2249-2256 2257-2264 2265-2272 2273-2280 ... 2496 next >
bonnetkeyless entryradiator capfuse boxtow barignition
Popular search:
brake vacuuminterior lights303-05languagefuse chartfuel tank removalTrip Computer