1998 JAGUAR X308 Workshop Manual

Page 865 of 2490

JAGUAR X308 1998 2.G Workshop Manual  
 
6. Reposition the clips which secure the engine harness to the 
cam cover. 
7.  Refit the on-plug ignition coils and the coil cover. Refer to 
Operation 18.20.41. 
8.  Refit the right hand engine

Page 866 of 2490

JAGUAR X308 1998 2.G Workshop Manual  
 
 
2. Fit the two bolts which secure the intake tube to the throttle body. 
12.  Remove the paintwork protection  sheets and close the engine 
compartment.

Page 867 of 2490

JAGUAR X308 1998 2.G Workshop Manual Engine - Valve Cover Gasket LH 
In-vehicle Repair 
Removal 
1. Open the engine compartment and fit paintwork protection 
sheets. 
2.  Carefully remove the le ft hand engine cover, taking care not to

Page 868 of 2490

JAGUAR X308 1998 2.G Workshop Manual Installation 
 
 
10. Remove the cam cover assembly. 
1. Release the fourteen sc rews which secure the cam 
cover. The screws stay in  place, held by the seals. 
2. Remove the cam cover,  screws and s

Page 869 of 2490

JAGUAR X308 1998 2.G Workshop Manual  
2. Fit the two new spark plug aperture seals. 
 
2. Fit the securing screws to the cam covers. 
1. Fit a new sealing ring  to each screw assembly. 
2. Fit the screws to the cam covers. Each screw is

Page 870 of 2490

JAGUAR X308 1998 2.G Workshop Manual  
 
6. Reposition the clips which secure the engine harness to the 
cam cover. 
7.  Refit the on-plug ignition coils and the coil cover. Refer to 
Operation 18.20.42. 
 
8.  Fit the intake tube / air

Page 871 of 2490

JAGUAR X308 1998 2.G Workshop Manual  
 
 
throttle body. 
11.  Refit the purge valve. Refer to Operation 17.45.01. 
12.  Reconnect the air flow  meter multi-plug. 
13.  Refit the left hand engine cover. 
14.  Remove the paintwork protec

Page 872 of 2490

JAGUAR X308 1998 2.G Workshop Manual Engine - Valve Cover Gasket RH 
In-vehicle Repair 
Removal 
1. Open the engine compartment and fit paintwork protection 
sheets. 
2.  Carefully remove the right hand  engine cover, taking care not 
to