1998 JAGUAR X308 Workshop Manual

Page 745 of 2490

JAGUAR X308 1998 2.G Workshop Manual  
8. Disconnect the air fl ow meter multi-plug. 
9.  Cut and remove the strap which secures the vacuum pipe to 
the induction elbow. 
 
10.  Disconnect the intake tube from the throttle body. 
1. Remo

Page 746 of 2490

JAGUAR X308 1998 2.G Workshop Manual Installation 
19.70.28. 
15. Remove the supercharger outlet  duct and gasket. Refer to 
Operation 18.50.17. 
16.  Remove the coolant output pipe. Refer to Operation (SC) 
26.31.08. 
17.  Remove the su

Page 747 of 2490

JAGUAR X308 1998 2.G Workshop Manual  
3. Fit the five bolts which secure the adaptor assembly to the cylinder head. 
4. Fit new seals to the fuel rail. 
 
2.  Fit the fuel rail to the intercooler adaptor. 
1. Align the fuel rail to the

Page 748 of 2490

JAGUAR X308 1998 2.G Workshop Manual  
 
12. Reconnect the air cleaner cover. 
Fit the five clips which secu re the air cleaner cover.  
 
13. Connect the intake tube to the throttle body. 
1. Connect the intake tube to the throttle b

Page 749 of 2490

JAGUAR X308 1998 2.G Workshop Manual  
 
Refer to the Battery Reconnection Procedure (86.15.15).  
19.  Remove the paintwork protection  sheets and close the engine 
cover.

Page 750 of 2490

JAGUAR X308 1998 2.G Workshop Manual Engine - Oil Pan 
In-vehicle Repair 
Removal 
Installation 
1. Open the engine compartment and fit paintwork protection 
sheets. 
2.  Raise the vehicle on a ramp. 
 
3. Drain the engine oil. 
1. Posit

Page 751 of 2490

JAGUAR X308 1998 2.G Workshop Manual  
 
 
 
3. Tighten the oil pan bolts to the  correct torque figure 11 - 13 
Nm, in the sequence indicated. 
A new oil pan is supplied with the drain plug fitted. Check 
that the plug is tightened t

Page 752 of 2490

JAGUAR X308 1998 2.G Workshop Manual Engine - Oil Pan Gasket 
In-vehicle Repair 
Removal 
Installation 
1. Open the engine compartment and fit paintwork protection 
sheets. 
2.  Raise the vehicle on a ramp. 
 
3. Drain the engine oil. 
1