1998 JAGUAR X308 Workshop Manual

octanelightskeylesswiper sizetransmissiontowing capacity
Popular search:
parking brake ORDER BY 9812.65.63spark plugsfuel qualityhigh beamFuel tankmanual transmission
Previous
Next
Load previous 8 pages

Page 1545 of 2490

JAGUAR X308 1998 2.G Workshop Manual Pinpoint test B: P0133 Measure the voltage between EM010/023 and EM015/002 1 Is the voltage B+? Yes Remove link lead and reconnect all connectors GO to A18 No Check EMS fuse F14 and that EMS c

Page 1546 of 2490

JAGUAR X308 1998 2.G Workshop Manual Connect the scan tool 1 Have the DTC(s) and freeze frame data been recorded? Yes GO to B2 B2: CHECK FOR LOW EX HAUST TEMPERATURE Check the engine and exhaust system for normal running temperat

Page 1547 of 2490

JAGUAR X308 1998 2.G Workshop Manual Run the engine for a period to warm the sensor and then maintain a steady speed of approximately 2500 rpm. 1 Measure the voltage between EM021/003 and EM021/004. 2 Is the voltage between 600mV an

Page 1548 of 2490

JAGUAR X308 1998 2.G Workshop Manual GO to B7 No Renew O2 sensor, reconnect plug(s). GO to B8 B7: CHECK FOR O2 SENSOR FAILURE With the conditions held as in B6, run the engine at 1500 rpm for approximately 2 minutes. 1 Does the

Page 1549 of 2490

JAGUAR X308 1998 2.G Workshop Manual With EM021 disconnected measure the insulation resistance between sensor pin 001 and sensor body. 1 Repeat for pin 003 and sensor body. 2 Is the resistance > 10 MOHM? Yes GO to B11 No Renew t

Page 1550 of 2490

JAGUAR X308 1998 2.G Workshop Manual With EM010 and EM014 disconnected, measure the resistance between EM010/023 and chassis ground EM008L. 1 Is the resistance < 0.5 OHM? Yes GO to B12 No Inspect connector EM010 for co rrosion, da

Page 1551 of 2490

JAGUAR X308 1998 2.G Workshop Manual With EM010 and EM014 disconnected, measure the resistance between EM014/004 and chassis ground EM008L. 1 Is the resistance < 0.5 OHM? Yes GO to B14 No Inspect connector EM014 for co rrosion, da

Page 1552 of 2490

JAGUAR X308 1998 2.G Workshop Manual With EM012 and EM021 disconnected, measure the resistance between EM012/015 and EM021/003. 1 Is the resistance < 0.5 OHM? Yes GO to B14 No Inspect harness / connectors EM012 and EM021 for corr
Load next 8 pages
Page:   < prev 1-10 ... 1513-1520 1521-1528 1529-1536 1537-1544 1545-1552 1553-1560 1561-1568 1569-1576 1577-1584 ... 2496 next >
ground clearancekey fobfusetailgatekey fob batterynavigation update
Popular search:
transmission fluid reservoirEngine fuse box diagrampark assistrear suspensionradio controlschargingparking brake ORDER BY 99