1998 JAGUAR X308 Workshop Manual

clockinfotainmentradiohorntow barchild restraint
Popular search:
303-06diagnostic menuBelt idleroil pressureRadio codesubframeparking brake ORDER BY 20
Previous
Next
Load previous 8 pages

Page 897 of 2490

JAGUAR X308 1998 2.G Workshop Manual • WARNINGS: 4. Remove the engine compartment cover (bonnet). 1. Apply masking tape to th e front edge of the engine compartment cover to protect the paintwork during removal and storage. 2.

Page 898 of 2490

JAGUAR X308 1998 2.G Workshop Manual ENSURE THAT ALL FIRE PREVENTION PROCEDURES ARE ACTIVE. BEFORE PROCEEDING, IT IS ESSENTIAL THAT THE WARNING NOTES GIVEN IN SECTION 100-00 (UNDER THE HEADING SAFETY PRECAUTIONS) ARE READ AND UNDER

Page 899 of 2490

JAGUAR X308 1998 2.G Workshop Manual 16. Disconnect the air cleaner cover. Remove the five clips which se cure the air cleaner cover. 17. Remove the intake tube / air flow meter / air cleaner cover assembly. 1. Remove the

Page 900 of 2490

JAGUAR X308 1998 2.G Workshop Manual 2. Release the hose, expansion tank to recovery tank. 3. Release the hose, expansion tank to radiator. 20. Fit blanking plugs to the pipes and the tank. 21. Remove the expansion tank from the

Page 901 of 2490

JAGUAR X308 1998 2.G Workshop Manual 27. Disconnect the radiator top hose. 1. Slacken the hose retaining clip and reposition the clip along the hose. 2. Disconnect the hose from the radiator. 28. Disconnect the transmission oil

Page 902 of 2490

JAGUAR X308 1998 2.G Workshop Manual 32. Remove the radiator top retaining panel. 1. Remove the panel. 2. Remove the radiator top mounting bushes. 33. Disconnect the condenser jump hose from the receiver / drier. 1. Remove th

Page 903 of 2490

JAGUAR X308 1998 2.G Workshop Manual 36. Disconnect the engine oi l pressure transmitter. 37. Remove the filler cap from the power steering reservoir. 38. Disconnect the hoses from the power steering pump. Position a drain

Page 904 of 2490

JAGUAR X308 1998 2.G Workshop Manual 41. Raise the vehicle on the ramp. 42. Drain the engine oil. 1. Position the waste oil bowser. 2. Remove the sump drain pl ug and drain the engine oil. Wipe the drain plug and refit it to
Load next 8 pages
Page:   < prev 1-10 ... 865-872 873-880 881-888 889-896 897-904 905-912 913-920 921-928 929-936 ... 2496 next >
jacking pointswheel sizechange timebrakeschargingkeyless entry
Popular search:
mufflerRestricted performancerear bumper componentsoil viscosityfront bearingpower steering fluidP1646