Page 449 of 3115

H05730
A
H05325
H05326
H05327
H05331
BO-122
- BODYREAR NO.1 SEAT (LH)
2696 Author: Date:
2004 LAND CRUISER (RM1071U)
HINT:
At the time of reassembly, please refer to the following items.
Tighten the 2 screws on the seatback side.
Fold down the seatback forward and raise it up to the first
lock position.
Turn A to the rear side of the seat cushion for initial posi-
tioning.
Check visually that the reference holes are penetrated.
Tighten the screws on the cushion side of seat belt reclin-
ing detecting part.
(b) Loosen the nut, remove the reclining connecting wire of
LH side edge.
(c) Remove the reclining connecting wire of RH side edge.
(d) Remove the 4 bolts and seatback assembly.
Torque: 41 N´m (420 kgf´cm, 30 ft´lbf)
11. w/ Armrest:
REMOVE ARMREST
(a) Remove the 2 nuts and armrest.
(b) Remove the 2 screws and 2 hinge covers.
(c) Remove the 2 bolts and hinges.
12. REMOVE SEATBACK FRAME
(a) Using a screwdriver, remove the rear seat shoulder belt
cover.
HINT:
Tape the screwdriver tip before use.
(b) Remove the 4 headrest supports.
(c) Disengage the hooks, remove the seatback frame.
13. REMOVE SEAT ADJUSTER CONTROL CABLE
Page 450 of 3115

H05332
H05333
H07956
- BODYREAR NO.1 SEAT (LH)
BO-123
2697 Author: Date:
2004 LAND CRUISER (RM1071U)
14. REMOVE REAR SEAT OUTER BELT
(a) Remove the 2 bolts and rear seat shoulder belt guide.
Torque: 42 N´m (430 kgf´cm, 31 ft´lbf)
HINT:
At the time of reassembly, please refer to the following item.
Install the shoulder belt guide to the seatback frame with a slit
the guide facing to the rear side of the vehicle.
(b) Remove the 2 nuts and rear seat outer belt.
Torque: 42 N´m (430 kgf´cm, 31 ft´lbf)
15. REMOVE NO. 1 PROTECTOR
16. REMOVE SEATBACK COVER
Remove the hog rings and seatback cover.
HINT:
At the time of reassembly, please refer to the following item.
When installing hog rings, take care to prevent wrinkles as little
as possible.
17. REMOVE SEAT CUSHION FRAME
Remove the hog rings and seat cushion frame.
HINT:
At the time of reassembly, please refer to the following item.
When installing hog rings, take care to prevent wrinkles as little
as possible.
18. REMOVE REAR NO. 1 SEAT ADJUSTER
(a) Remove the 2 bolts and rear No. 1 seat outer adjuster.
Torque: 41 N´m (420 kgf´cm, 30 ft´lbf)
(b) Remove the 2 bolts and rear No. 1 seat inner adjuster.
Torque: 41 N´m (420 kgf´cm, 30 ft´lbf)
(c) Remove the 2 hinge covers from the outer and inner ad-
juster.
19. REMOVE REAR SEAT STAY
Remove the 2 bolts and rear seat stay.
20. REMOVE LH NO. 1 SEAT LEG STAY
Using a screwdriver, remove the spring nut, E-ring and LH No.
1 seat leg stay.
21. REMOVE REAR SEAT CUSHION HINGE
(a) Using a screwdriver, remove the spring nut and E-ring.
(b) Remove the 2 hinge pins, 2 cushion spacers, 2 cushion
support springs and 2 rear seat cushion hinges.
22. REMOVE LH REAR SEAT LOCK
Unfasten the bolt, then remove the inner belt and LH rear seat
lock.
Page 451 of 3115
BO1L4-03
- BODYREAR NO.1 SEAT (LH)
BO-125
2699 Author: Date:
2004 LAND CRUISER (RM1071U)
INSTALLATION
Installation is in the reverse order of removal (See page BO-1 19).
Page 452 of 3115
BO1L3-01
BO-124
- BODYREAR NO.1 SEAT (LH)
2698 Author: Date:
2004 LAND CRUISER (RM1071U)
REASSEMBLY
Reassembly is in the reverse order of disassembly (See page BO-120).
Page 453 of 3115
BO1L1-04
- BODYREAR NO.1 SEAT (LH)
BO-1 19
2693 Author: Date:
2004 LAND CRUISER (RM1071U)
REMOVAL
REMOVE REAR NO. 1 SEAT
(a) Fold the seatback down.
(b) Unlock the seat lock, and swing the whole seat up and forward.
(c) Using a screwdriver, remove the seat leg covers.
HINT:
Tape the screwdriver tip before use.
(d) Remove the 4 bolts and rear No. 1 seat.
Torque: 37 N´m (380 kgf´cm, 27 ft´lbf)
Page 454 of 3115
BO1L5-05
H07958
Headrest
Headrest Support
Seatback Cover Seatback Pad
Seatback Frame No. 1 ProtectorSeatback BoardNo. 1 Reclining Cover
Corner Pad No. 1 Seat Adjuster
Rear No. 1
Seat Inner Belt Reclining
Inner
Cover
Hinge Cover
Reclining Inner CoverReclining
Connecting Wire
No. 1 Seat
Adjuster
Hinge Cover
No. 1
Reclining
Cover Corner Pad
Reclining Adjuster
Release HandleSeat Cushion
Under Cover
Seat Cushion
Under CoverSeat Cushion
Under Cover
Sub-Assembly
Rear Seat
Lock Striker Cover Fold Seat
Stopper Band
No. 1 Seat Leg StaySeat Leg Rear Seat
Lock
No. 2 Fold Seat
Lock Control CableLock Cover
Reclining Remote
Control Lever Knob
: Specified torque
N´m (kgf´cm, ft´lbf)
Non-reusable part
Hog Ring
Hinge Cover
Cushion
Hog Ring
Seat Cushion Cover
Seat Cushion Pad
Seat Cushion Frame
37 (380, 27)
41 (420, 30)
37 (380, 27)
BO-126
- BODYREAR NO.1 SEAT (RH)
2700 Author: Date:
2004 LAND CRUISER (RM1071U)
REAR NO.1 SEAT (RH)
COMPONENTS
Page 455 of 3115

BO1L7-05
H05302
H06471
H05305
H05306
BO-128
- BODYREAR NO.1 SEAT (RH)
2702 Author: Date:
2004 LAND CRUISER (RM1071U)
DISASSEMBLY
1. REMOVE HEADREST
2. REMOVE SEATBACK BOARD
Using a screwdriver, remove the seatback board as shown in
the illustration.
HINT:
Tape the screwdriver tip before use.
3. REMOVE RECLINING ADJUSTER RELEASE HANDLE
(a) Using a screwdriver, remove the cover.
HINT:
Tape the screwdriver tip before use.
(b) Remove the screw and reclining adjuster release handle.
4. REMOVE NO. 1 RECLINING COVER
(a) Remove the 4 hog rings and open the seatback cover.
HINT:
At the time of reassembly, please refer to the following item.
When installing hog rings, take care to prevent wrinkles as little
as possible.
(b) Remove the 2 corner pads.
(c) Remove the 2 screws and 2 No. 1 reclining covers as
shown in the illustration.
5. REMOVE RECLINING CONNECTING WIRE
(a) Loosen the nuts, then remove the reclining connecting
wire of RH side edge.
(b) Remove the reclining connecting wire of LH side edge.
(c) Remove the clamp and reclining connecting wire.
6. REMOVE SEATBACK ASSEMBLY
Remove the 4 bolts and seatback assembly.
Torque: 37 N´m (380 kgf´cm, 27 ft´lbf)
Page 456 of 3115

H05307
H05308
- BODYREAR NO.1 SEAT (RH)
BO-129
2703 Author: Date:
2004 LAND CRUISER (RM1071U)
7. REMOVE SEATBACK FRAME
(a) Remove the 4 screws and reclining inner cover.
(b) Remove the 2 hog rings.
HINT:
At the time of reassembly, please refer to the following item.
When installing hog rings, take care to prevent wrinkles as little
as possible.
(c) Disengage the hook, then remove the headrest supports.
(d) Remove the seatback frame.
(e) Remove the 2 No. 1 protectors from the seatback frame.
8. REMOVE SEATBACK COVER
Remove the hog rings and seatback cover.
HINT:
At the time of reassembly, please refer to the following item.
When installing hog rings, take care to prevent wrinkles as little
as possible.
9. REMOVE SEAT CUSHION UNDER COVER
Remove the 2 screws and 2 seat cushion under covers.
10. REMOVE SEAT CUSHION COVER WITH PAD
(a) Using a screwdriver, disengage the hooks as shown in the
illustration.
HINT:
Tape the screwdriver tip before use.
(b) Remove the seat cushion cover with pad.
11. REMOVE SEAT CUSHION COVER
Remove the hog rings and seatback cover.
HINT:
At the time of reassembly, please refer to the following item.
When installing hog rings, take care to prevent wrinkles as little
as possible.
12. REMOVE CUSHION
Remove the screw and cushion from the seat cushion under
cover sub-assembly.
13. REMOVE LOCK COVER
Remove the screw and lock cover.
14. REMOVE RECLINING REMOTE CONTROL LEVER
KNOB
Remove the screw and reclining remote control lever knob.
15. REMOTE FOLD SEAT STOPPER BAND
Remove the bolt and fold seat stopper band.
16. REMOVE SEAT CUSHION UNDER COVERS
Remove the 2 screws and 2 seat cushion under covers.