A04451
Turn
A04452
Tension
Turn
A04453
Turn
P20636
1.27 mm
Hexagon
Wrench
A04454
1.27 mm
Hexagon
Wrench
EM-24
- ENGINE MECHANICALTIMING BELT
1597 Author: Date:
2004 LAND CRUISER (RM1071U)
12. CONNECT TIMING BELT TO LH CAMSHAFT
TIMING PULLEY
(a) Remove any oil or water on the LH camshaft timing pulley,
and clean it up.
NOTICE:
Only wipe the pulleys; do not use any cleansing agent.
(b) Turn the LH camshaft timing pulley. Align the installation
mark on the timing belt with the timing mark of the cam-
shaft timing pulley, and hang the timing belt on the LH
camshaft timing pulley.
(c) Turn the LH camshaft timing pulley counterclockwise until
there is tension between the crankshaft timing pulley and
the LH camshaft timing pulley.
13. CONNECT TIMING BELT TO RH CAMSHAFT
TIMING PULLEY
(a) Remove any oil or water on the RH camshaft timing pulley
and water pump pulley, and clean them up.
NOTICE:
Only wipe the pulleys; do not use any cleansing agent.
(b) Turn the RH camshaft timing pulley. Align the installation
mark on the timing belt with the timing mark of the cam-
shaft timing pulley, and hang the timing belt on the RH
camshaft timing pulley.
14. SET TIMING BELT TENSIONER
(a) Using a press, slowly press in the push rod using 981 -
9,807 N (100 - 1,000 kgf, 220 - 2,205 lbf) of pressure.
(b) Align the holes of the push rod and the housing, pass a
1.27 mm (0.050 in.) hexagon wrench through the holes to
keep the setting position of the push rod.
(c) Release the press.
(d) Install the dust boot to the belt tensioner.
15. INSTALL TIMING BELT TENSIONER
(a) Temporarily install the belt tensioner with the 2 bolts.
(b) Alternately tighten the 2 bolts.
Torque: 26 N´m (270 kgf´cm, 19 ft´lbf)
(c) Using pliers, remove the 1.27 mm (0.050 in.) hexagon
wrench from the belt tensioner.
