1998 TOYOTA LAND CRUISER Factory Repair Manual

oil capacities wheel alignment power steering fluid air condition lights wheel bolt torque

Load previous 8 pages

Page 1753 of 3115

TOYOTA LAND CRUISER 1998 Factory Repair Manual DI3CP-03
I25788
Engine Room R/B
BAT Fuse Theft Deterrent Horn
Ignition Switch
Theft Deterrent ECU
Cowl Side J/B LH
IG1 No.2 Relay
ECU-IG1 Fuse
AM1 Fuse
Cowl Side J/B RH
SECURITY Fuse
ECU-B

Page 1754 of 3115

TOYOTA LAND CRUISER 1998 Factory Repair Manual DIB4R-01
- DIAGNOSTICSTHEFT DETERRENT SYSTEM
DI-955
1148 Author: Date:
2004 LAND CRUISER (RM1071U)
PRE-CHECK
1. OUTLINE OF THEFT DETERRENT SYSTEM
The security has an ºAlarm Controlº and the cont

Page 1755 of 3115

TOYOTA LAND CRUISER 1998 Factory Repair Manual Disarmed state
Perform any of the followings, and the system will go no to ºArming preparationº:
With all the doors, engine hood and luggage compartment door closed, lock all
doors with the ke

Disarmed state
Perform any of the followings, and the system will go no to ºArming preparationº:
With all the doors, engine hood and luggage compartment door closed, lock all
doors with the key.
With all the doors, engine hood and luggage compartment door closed, lock all
doors with the wireless remote.
With all the doors, engine hood and luggage compartment door closed, open and
close any of doors, engine hood or luggage compartment door, then close and
lock all doors, engine hood and luggage compartment door.
Arming preparation
Perform the following, and the system will
go on to ºArmed stateº:
Let 30 seconds elapse with all the doors,
engine hood and luggage compartment
door closed and locked.
Perform any of the followings, and the system
will return to ºDisarmed stateº:
Open any of the doors, engine hood or
luggage compartment door.
Unlock any of the doors.
Insert the key in the ignition.
Reconnect the battery.
Turn the ignition from OFF to ON.
Armed state
Perform any of the followings, and the system
will return to ºDisarmed stateº:
Unlock any of the doors or open the
luggage compartment door with the wireless
remote ().
Unlock the doors or open the luggage
compartment door with the key ().
Put the key in the ignition and turn it to ON.
Perform any of the followings, and the system
will go on to ºAlarm soundingº:
Open any of the doors.
Unlock any of the doors in any way other
than with a key or the wireless remote.
Open the luggage compartment door in any
way other than with a key or the wireless re-
mote.
Open the engine hood.
Reconnect the battery.
Turn the ignition from OFF to ON.(Key not inserted in ignition.)
Alarm sounding
Perform any of the followings, and the system
will return to ºDisarmed stateº:
Unlock any of the doors or open the
luggage compartment door with the wireless
remote.
Unlock the doors or open the luggage
compartment door with the key.
Put the key in the ignition and turn it to ON.The vehicle's horn and security horn will
sound, and the hazard,Tail and Head lights flash
for 60 seconds.
After the alarm has ended, the system will
return to ºArmed stateº.
DI-956
- DIAGNOSTICSTHEFT DETERRENT SYSTEM
1149 Author: Date:
2004 LAND CRUISER (RM1071U)

Page 1756 of 3115

TOYOTA LAND CRUISER 1998 Factory Repair Manual - DIAGNOSTICSTHEFT DETERRENT SYSTEM
DI-957
1150 Author: Date:
2004 LAND CRUISER (RM1071U)
3. PASSIVE ARMING MODE
There are 4 modes in active mode.
(1) Disarmed state (1)
The state is same as the

Page 1757 of 3115

TOYOTA LAND CRUISER 1998 Factory Repair Manual Perform the following, and the system will go to Disarmed state (B):
Remove the key from the ignition, open any doors, then the ignition OFF.
Disarmed state (A)
Perform any of the followings, and th

Page 1758 of 3115

TOYOTA LAND CRUISER 1998 Factory Repair Manual Door
Indicator
Alarming output
System condition
Armed state Alarm
sounding Entry delay time Close
Open
ON
OFF
ON
OFF
- DIAGNOSTICSTHEFT DETERRENT SYSTEM
DI-959
1152 Author: Date:
2004 LAND CRUISER

Page 1759 of 3115

TOYOTA LAND CRUISER 1998 Factory Repair Manual DI-960
- DIAGNOSTICSTHEFT DETERRENT SYSTEM
1153 Author: Date:
2004 LAND CRUISER (RM1071U)
4. INDICATOR LIGHT OUTPUT
The indicator output the condition of the alarm control and the
intrusion sensor

Page 1760 of 3115

TOYOTA LAND CRUISER 1998 Factory Repair Manual A04550
DLC3
10 11 12 13 14 15 16 12345678
9
- DIAGNOSTICSTHEFT DETERRENT SYSTEM
DI-961
1154 Author: Date:
2004 LAND CRUISER (RM1071U)
6. FORCED DOOR LOCK CONTROL
While detecting intrusion into the

A04550
DLC3
10 11 12 13 14 15 16 12345678
9
- DIAGNOSTICSTHEFT DETERRENT SYSTEM
DI-961
1154 Author: Date:
2004 LAND CRUISER (RM1071U)
6. FORCED DOOR LOCK CONTROL
While detecting intrusion into the vehicle and sounding alarm,
alarm control outputs the door lock at the moment the door is
unlocked, and prevents intrusion into the vehicle.
(1) Condition for Starting Forced Door Lock
Detecting any of the following conditions activates
the forced door lock.
Alarm system is in alarm status in active
mode.
Except for the case that the key unlock/lug-
gage unlock switch is turned on.
No key is in the ignition key cylinder.
Some of the doors are unlocked.
Since the start of the last forced lock, 0.38
sec. or more has been elapsed.
(2) Conditions for Stopping Forced Door Lock
Detecting any of the following conditions stops the
forced door lock.
All doors are locked.
An alarm is stopped.
A key is inserted into the key cylinder.
7. PANIC CONTROL
The function to sound the alarm when the user presses the pan-
ic switch of the wireless key.
8. ALARM MEMORY CONTROL
If an alarm is activated while a user leaves the vehicle, when the
user comes back to the vehicle and reset the security system,
the tail lights will come on for 2 sec. to show the alarm occur-
rence.
9. DTC CHECK (Using hand-held tester)
(a) Inspect the DLC3.
The vehicle's ECM uses ISO 9141-2 for communication.
The terminal arrangement of DLC3 complies with
SAEJ1962 and matches the ISO 9141-2 format.
HINT:
If the display shows ºUNABLE TO CONNECT TO VEHICLEº
when the cable of hand-held tester is connected to DLC3, the
ignition switch is turned ON and the scan tool is operated, there
is a problem either on the vehicle side or the tool side.
If communication is normal when the tool is connected to
another vehicle, inspect DLC3 on the original vehicle.
If communication does not function when the tool is con-
nected to another vehicle, the problem is probably in the
tool itself, so consult the Service Department listed in the
tool's instruction manual.
(b) Make sure the details of the DLC3.

Load next 8 pages

Page: < prev 1-10 ... 1721-1728 1729-1736 1737-1744 1745-1752 1753-1760 1761-1768 1769-1776 1777-1784 1785-1792 ... 3120 next >

compression ratio service garage door opener seat adjustment drain bolt jump start terminals