1998 TOYOTA LAND CRUISER air mix servo

I24787
Front Heater Unit
 Heater Radiator
 Air Mix Servomotor
 Air Outlet Servomotor Solar Sensor
Front Cooling Unit
 Expansion Valve
 Evaporator
 Evaporator Temperature Sensor Rear Heater Unit
 Blower Motor
 Power Transistor
 Heater Radiator
 Air Mix Servomotor
 Air Inlet Temperature Sensor
Room Temperature Sensor
(for Rear A/C)
Rear Cooling Unit
 Blower Motor
 Power Transister
 Evaporator
 Thermistor
 Expansion Valve with Magnetic Valve
Blower Unit
 Blower Motor
 Blower Motor Control Rela
y
 Air Inlet ServomotorA/C Amplifier
Integration Control Panel Room Temperature Sensor
(for Front A/C)
Rear A/C Control Switchw/ EMV:
w/o EMV:
A/C Control
A/C Amplifier
Cowl Side J/B LH

ACC Fuse
Cowl Side J/B RH

RR A/C AC-14
- AIR CONDITIONINGAIR CONDITIONING SYSTEM
2739 Author
: Date
:
2004 LAND CRUISER (RM1071U)

I06741
AC1LK-06
AC-84
- AIR CONDITIONINGAIR MIX SERVOMOTOR (for Front A/C)
2809 Author
: Date
:
2004 LAND CRUISER (RM1071U)
AIR MIX SERVOMOTOR (for Front
A/C)
INSPECTION
1. REMOVE AIR MIX SERVOMOTOR
(a) Disconnect the connector.
(b) Remove the 2 screws and the air mix servomotor.
2. INSPECT AIR MIX SERVOMOTOR OPERATION
(See page DI-1354)
3. INSPECT AIR MIX DAMPER POSITION SENSOR
(See page DI-1345)
4. INSTALL SERVOMOTOR
(a) Install the servomotor with the 3 screws.
(b) Connect the connector.

AC1KH-03
I07436
No. 1 BraceReinforcementInstrument Panel
Heater to Register No. 4 Duct
Heater to Register No. 3 Duct Heater Unit
Lower Defroster Nozzle No. 2 Brace
Heater Radiator
Air Duct (Vent)Cooling Unit
Air Mix Servomotor

Non-reusable partAir Outlet Servomotor
Air Duct (Foot)
PackingWater Hose
Heater Case
I06723 I06724
- AIR CONDITIONINGFRONT HEATER UNIT
AC-39
2764 Author
: Date
:
2004 LAND CRUISER (RM1071U)
FRONT HEATER UNIT
COMPONENTS

AC1KJ-03
I06730
I06731
I06732
I06733
I06734
- AIR CONDITIONINGFRONT HEATER UNIT
AC-41
2766 Author
: Date
:
2004 LAND CRUISER (RM1071U)
DISASSEMBLY
1. REMOVE HEATER RADIATOR
(a) Pry out the packing.
(b) Remove the screw and the bracket.
(c) Remove the screw and the clamp.
(d) Pull out the heater radiator.
2. REMOVE AIR OUTLET SERVOMOTOR
Remove the 3 screws and the air outlet servomotor.
3. REMOVE AIR MIX SERVOMOTOR
(a) Disconnect the connector.
(b) Remove the 3 screws and the air mix servomotor.
(c) Release the claw and remove the wire harness.
4. REMOVE AIR DUCT (Foot Duct)
Remove the 2 screws and air duct.
5. REMOVE AIR DUCT (Vent Duct)
(a) Disconnect the mode damper control link.
(b) Remove the 2 screws and the air duct.

I08487
Power Transistor
Air Inlet Temperature
Sensor
Cover
Fan
Heater Case
Blower Motor Heater Case Heater Radiator
O-Ring
Heater Radiator Pipe
Air Mix Servomotor

Non - reusable part
AC-46
- AIR CONDITIONINGREAR HEATER UNIT
2771 Author
: Date
:
2004 LAND CRUISER (RM1071U)

AC1KP-03
I06819
I06821
I06681
I06818
I07896
- AIR CONDITIONINGREAR HEATER UNIT
AC-49
2774 Author
: Date
:
2004 LAND CRUISER (RM1071U)
DISASSEMBLY
1. REMOVE AIR MIX SERVOMOTOR
Remove the 3 screws and the air mix servomotor.
2. REMOVE HEATER RADIATOR
(a) Remove the 3 screws and 2 clamps
(b) Pull out the heater radiator.
(c) Remove the 2 screws, 2 clamps and the heater radiator
pipes.
(d) Remove the 2 O-rings.
HINT:
At the time of reassembly, do not reuse the O-rings
3. REMOVE POWER TRANSISTOR
Remove the 2 screws and the power transistor.
4. REMOVE BLOWER MOTOR
(a) Remove the 3 screws and the cover.
(b) Remove the 4 screws, the 3 holding springs and separate
the heater cases.

AC1KQ-05
I07898
1
2
- AIR CONDITIONINGREAR HEATER UNIT
AC-51
2776 Author
: Date
:
2004 LAND CRUISER (RM1071U)
INSPECTION
1. INSPECT HEATER RADIATOR
If the fins are clogged, clean them with compressed air.
2. INSPECT BLOWER MOTOR OPERATION
Connect battery positive (+) lead to terminal 1 and battery neg-
ative (-) lead to terminal 2, then check that the motor rotates
smoothly.
If operation is not as specified, replace the blower motor.
3. INSPECT AIR MIX SERVOMOTOR (See page DI-1354)
4. INSPECT AIR MIX DAMPER POSITION SENSOR
(See page DI-1345)

2004 LAND CRUISER (EWD548U)
70G ELECTRICAL WIRING ROUTING
Position of Parts in Instrument Panel
A 14 Accel Position Sensor
A 18 A/C Solar Sensor
A 19 A/C Thermistor
A 24 Air Inlet Control Servo Motor
A 25 Air Mix Control Servo Motor
A 26 Air Vent Mode Control Servo Motor
A 27 Airbag Squib (Front Passenger Airbag Assembly)
A 28 Airbag Squib (Steering Wheel Pad)
A 29 Ashtray Illumination
A 30 Auto Antenna Control Relay
A 31 Automatic Light Control Sensor
A 41 ABS & BA & TRAC & VSC ECU
A 42 ABS & BA & TRAC & VSC ECU
A 43 ABS & BA & TRAC & VSC ECU
A 44 ABS & BA & TRAC & VSC ECU
A 45 A/C Control Assembly
A 46 A/C Control Assembly
A 47 A/C Control Assembly
A 48 A/T Shift Lever Illumination
Shift Lock Control ECU
B 1 Blower Motor Controller
B 7 Body ECU
B 8 Body ECU
B 9 Body ECU
C 5 Center Diff. Lock Control Relay
C 10 Cigarette LighterC 11 Cigarette Lighter Illumination
C 12 Combination Meter
C 13 Combination Meter
C 14 Combination Meter
C 15 Combination Meter
C 16 Combination SW
C 17 Combination SW
C 18 Combination SW
C 19 Combination SW
C 25 Center Airbag Sensor Assembly
C 26 Center Airbag Sensor Assembly
C 27 Center Airbag Sensor Assembly
C 28 Center Cluster Integration Panel
D 7 Data Link Connector 3
D 26 DVD Automatic Changer
E 4 Electronically Controlled Transmission Pattern Select SW
E 5 Engine Control Module
E 6 Engine Control Module
E 7 Engine Control Module
E 8 Engine Control Module
E 9 Engine Control Module
G 3 Glove Box Light
G 4 Gateway ECU
I 18 Ignition SW